Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 07-11-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-11-2025 |
| Sl. No. | Item Description |
| 1 | Note : In case description of any two or more items of the schedule ‘A’ is same and the tenderer quotes different rates for such items, only lowest rate of such items will be considered for acceptance and subsequently payment will be made upon execution of the items accordingly. |
| 2 | DismantlingAsbestos cement (corrugated,semicorrugated, etc.) sheets in roofcoverings complete all as specified and directed |
| 3 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwsas specified complete all as specified and directed. |
| 4 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screwsas specified |
| 5 | Dissmantling wallandceilingboards(fibre,pulp, insulation, etc.) orinsulationboards/slabs/ blankets, any thickness, includingcover fillets complete all as directed |
| 6 | S&F GI powder coated snap grid frame work of size 600X600mm having Main Tee of 24X32mm, Cross Tee 24X26mm and L angle of 24X24mm for false ceiling along with Hangers 2 mm dia GI (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed. |
| 7 | M&L False ceiling of 8mm thick gypsum ceiling tiles with front PVC laminated & back Aluminium foil, Ceiling board of dimension 595X595mm with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre grid (Frame work of ceiling shall be measured and paid separately).Make:Diamond, Everest or Equivalent. |
| 8 | Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed |
| 9 | M&L Plain Cement concrete type C-2, 1:3:6(40mm graded aggregate) 75mm thick Laid in plinth protection including Grade B joint fillingcomplete all as directed |
| 10 | Demolition of cement concrete (Reinforced) of any description andin anypositionnot otherwise specifically provided for |
| 11 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as speified and directed |
| 12 | Dismantling floor, hearth or wall tiling including cement mortar bedding & conc (but not backing) and rubbish off the premises. |
| 13 | M&L 25 mm thick PCC(1:2:4)type B0 using 12.50 mm graded stone aggregate as in floors all as specified and directed. |
| 14 | M&L Non skid ceramic tiles (Rectified/square tiles) of 7 to 10 mm thick(square/ rectangular) area of each the exceeding 0.18 sqm but not exceeding 0.38 sqm,of approved 1st qualityin floors etc with screed bed or bedding layer 15mm thick in CM 1:4 in floor finishes set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles all as specified and directed. |
| 15 | M&L Non skid ceramic tiles (Rectified tiles) of 7 to 10 mm thick(square/ rectangular) area of each the exceeding 0.18 sqm but not exceeding 0.38 sqm,of approved 1st qualityin skirting/dado etc with screed bed or bedding layer 15mm thick in CM 1:4 in floor finishes set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles all as specified and directed. |
| 16 | M& L Machine cut kota stone slab flooring including skirting/dado 20-25mm thick over 20mm thick cement screed base laid in CM 1:6and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 17 | M&L for Cutting and Polishing of old Kota stone flooring complete all as specified and directed |
| 18 | M&L for rendering to Stone /Brick masonry surfaces or fair faces of concrete surfaces, 20mm thick (10mm in two layers) in cement mortar 1:4, scoured for fixing tiles /stone slabs in skirting/ dados etc to complete all as specified and directed. |
| 19 | M&L Glazed Ceramic tiles coloured, of size450mmX350mm/300mmX7mm thick approved 1st quality asinvertical surfaces such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointedwithwhite/ coloured cement to match the colour of tiles all as specified and directed. Note: PVC tile beading to be done at external corners along the edge of the tile and the cost is included in rate quoted above. |
| 20 | M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 21 | Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situationcomplete all as specified and directed. |
| 22 | M&L 18-20 mm thick Sadarahalli Stones slab (of any type), in floors, steps,Skirting and risers etc any colour, Polished bedded over cement screed bed 10mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 23 | Taking down Chowkhats or frames withshutters n exc 1.5 sq. meach complete all as specified and as directed |
| 24 | Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as directed. |
| 25 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat (for Single rebate) of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 26 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat (for double rebate) of size65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 27 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flushshutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 28 | All as per item No. 26 above but as in Glazed and skeleton shutters |
| 29 | S&F 100 mm long SS Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for WPC door frame along with strong adhesives to Brass screws for fixing complete all as specified and directed |
| 30 | S&F Factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories is included and packing the gaps with silicon sealent complete all as directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)(A) Area not exceeding 2.00 sqm each |
| 31 | Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of\"zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) (A) Area not exceeding 1.00 sqm each |
| 32 | S & F factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both havingwmulti-chambered frame andmullion (where ever required) extruded profiles dulyreinforced with 1.60 ± 0.2 mm thick galvanized mildsteel section made from roll forming process ofrequired length (shape & size according to uPVCprofile), uPVC extruded glazing beads of appropriatedimension, EPDM gasket, G.I. fasteners 100 x 8 mmsize for fixing frame to finished wall, plastic packers,plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion weldedat all corners, mullion (if required) shall be also fusionwelded including drilling of holes for fixinghardware\"s and drainage of water etc. After fixingframe the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealantover backer rod of required size and of approvedquality, all complete as per approved drawing &direction of Engineer-in-Charge. (Glass shall be paidseparately). |
| 33 | M & L MS Framed work such as grills,gratings, etc.. with ends of barsshouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors;ladders; framedbalusters; walkways; railings; framework ofwater tanksand similar workconforming to Fe.290.Gde-E-165 complete all as specified and directed |
| 34 | S&F 200 mm size Aluminium tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed |
| 35 | S&F 150 mm size extruded aluminiumdoor handlesfabricated type complete all as specified and as directed |
| 36 | S&F 200mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 37 | S&F mild steel helical door spring rat tail rod model including roller plate complete 300 mm long complete all as specified and as directed |
| 38 | S&F 140 mm longfloor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed |
| 39 | Supply only Wire netting of stainlesssteel wire 1.4mm dia fixed with tinned tacks ofstainless steel wirestaples for skeleton shutters etc complete all as specified and directed |
| 40 | S&F 4.0 mm thick tinted /plain glass of superior quality fixed to aluminium partition and door each pan. |
| 41 | S&F in repairs 25 mm dia Stainless steel curtain rodswith fixing brackets, End caps, stops, rollers etc.and taking down old pipe complete all as specified and as directed |
| 42 | S&F 18/19mm Block boards, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame-work complete allas specified and directed. |
| 43 | M&L 1mm thick Laminate sheet (sunmyca sheet) glossy finish any colour paste with favicol on plywood/ Block board for cabinet and cupbord, commercial type on one sides complete, as specified and directed |
| 44 | S&F Stainless steel Handle 100mm dia as directed. |
| 45 | S&F Clip on soft hinges full overlay as directed.Make : Godrej |
| 46 | Extra over rates of 18/19mm thickparticle board for external teak wood lipping, 6 mm thick,fixed with nails complete all as specified and as directed. |
| 47 | Supply and fixing 100 mm size hasp and staple, hinge type aluminium anodised complete all as specified and as directed. |
| 48 | Dismantling of existing PVC 500-1000 ltrs water tank complete all as specified and directed. |
| 49 | S&F 1000 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position including taking down old unserviseable water tanksall as specified and directed. |
| 50 | S&F 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) all as specified and directed. |
| 51 | S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 25 mm bore pipe all as specified and directed. |
| 52 | Taking down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store all as specified and directed. |
| 53 | All same as per item No.51 here in before but 20 mm bore. |
| 54 | S&F16mm CPVC pipe outer dia with SDR 13.5pipes & plain CPVC SDR11 fittings fittings intrenches, floors, walls etccomplete all asspecifiedand directed. |
| 55 | All as per item No.53 above but 20mm bore. |
| 56 | M & L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth |
| 57 | S&FCounter top wash hand basin oval shaped550x430x195mm complete all as specified and directed. Make: Parryware or equivalent |
| 58 | S&F in repair 15 mmbore CP fancy type long body Bib tap crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 59 | S&F 32mm Dia PVC waste pipe for sinks/urinals/ wash basins complete all as directed and specified. |
| 60 | S & F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 61 | S&F 15mm bore pillar taps of Swan neck type CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and directed.Make: Prayag or quivalent in other make. |
| 62 | S&F 32mm CP Bottle traps for washbasin/urinal outletMake: Prayag or equivalent in other make complete all as specified and asdirected |
| 63 | S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc..and Seat cover for pedestal pan withall as specified and directed. |
| 64 | S&F vitreous china squatting pan (orissa pattern), size 580x440 mm white with integral foot rests includingremoving the existing onecomplete and making good all connectionsas in repairs all as specified and directed. |
| 65 | S&F for Vitreous China urinals, half stall urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement;complete all as specified and directed |
| 66 | S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) |
| 67 | Supply and fix 15 mm bore PVC connection pipe 45cm long withbrass nuts and washers on both ends all asin repairs specified and directed. |
| 68 | Supply and fix 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including 15 mm bore LDPE pipe 45cm long withbrass nuts and washers complete all as specified and directed. |
| 69 | S&F brass CP Two way tap screwed down for iron pipe suitable for 15 mm dia bore of pipe complete all as specified and asdirectedMake : Prayag/Parryware or equivalent |
| 70 | S&F brass chromium plated health faucet 15mm dia reinforced pipe fitted topipe complete all as specified and directed. Make : Prayag/Parryware or equivalent |
| 71 | S&F brass CP wall mixer 15 mm bore for mixing hot and cold water screwed down for iron pipe and fixed as specified and directedMake: Prayagor quivalent in other make. |
| 72 | S&F brass CP shower rose with arms 75 mm size fixed all as specified and directed. |
| 73 | S&F 15mm CP Angle valves, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair.Make: Prayag/Parryware or equivalent. |
| 74 | S&F concealedstop valves 15 mmbore fancy type, chromium plated, with long shank and cup,screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs all as specified and directed. |
| 75 | S & F Acrylic Corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard complete all as specified and directed |
| 76 | S&F CP Towel ringcomplete all as specified and directed |
| 77 | S&F Towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws andwooden/plastic cleats. and fixed in all as specified and directed. |
| 78 | S&F Soap dish any type fixed to plugs with chromium plated complete all as specified and directed |
| 79 | S&F Stainless Steel Pegset of 4 No Pegs fixed withand including CP brass screws and wooden/Plastic cleats and fixed complete all as specified and directed. |
| 80 | S&F SS Grating round 140 mm dia(Minimum weight 50gms) and fixed in repairs all as specified and directed. |
| 81 | S&F SS Grating doom 125 mm dia with waste hole (Minimum weight 40gms) and fixed in repairs all as specified and directed. |
| 82 | Demolition/Dismantling of drain pipes any type at any position complete all as specified and directed. |
| 83 | S&F PVC (SWR) floor trap of 75mm, plain with Grating doom 125 mm dia with or without waste hole (as necessity) of PTMT (Minimum weight 40gms) including jointing with solvent cement complete all as specified and as directed. |
| 84 | S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 85 | S&F PVC (SWR) bends of 75mm bore complete all as specified and as directed. |
| 86 | S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 87 | S&F PVC (SWR) bends of 110mm bore complete all as specified and as directed. |
| 88 | S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed. |
| 89 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 90 | M&L Hardcore of gauge nexc 63mm, deposited, spread and levelled in layers n. exc 15cm thick, watered and rammed to surface complete all as directed. |
| 91 | M&L Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick in floors and pavings etc. all as specified and directed. |
| 92 | Material and labour for Colour Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey cement and no pigment set jointed and pointed in neat cement slurry colour to match including Screed bed of mortar 15 mm thick for laying floor finishes with cement motor 1:4 complete all as directed. |
| 93 | M&L sand filing under floors including watering and consolidation all as specifide and directed |
| 94 | M&L Rubberised machine pressed precast concrete coloured interlocking paver block any shape and size fixed with gray cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Gradeall as specified and directed |
| 95 | M&L Providing, cement concrete in roof kerbs or mud stops, rounded 1:2:4 type B0 using 12.5mm graded stone aggregate or all as specified and directed. |
| 96 | M&L for providing reinforced precast cement concrete type B2 1:2:4 set in cement mortar 1:6 as in cover slabs as in drain covers complete all as specified and directed. |
| 97 | M&L for TMT bars 10 mm dia and over ,cut to length bent to shape required including cranking, bending, spirally hooping for columns and binding with MS wire (annealed) not less than 0.90mm dia wire etc complete all as specified and as directed. |
| 98 | Removing excavated/demolished material exc 250 m n.exc 500m or out of MOD land and depositing where directed at a level n.exc 1.5 km above the starting point. |
| 99 | M & L Brushing neat cement slurry with 3.0 kg of cement per square metre on old concrete surfaces. |
| 100 | Material and labour 40mm averagethick PCC nominal mix 1:2:4 type B0 (12.50mm graded stone aggregate) for roof treatment etc. |
| 101 | M&L for rendering 10 mm thick in CM 1:3 on concrete roof slabs including mixing water proofing compound at 2% by weight of cement (but excluding the cost of cement), finishing the surface even and smooth without using extra cement complete all as specified and as directed. |
| 102 | Supply only liquid water proofing compound |
| 103 | M & L for preparation of concrete surfaces free from loose materials, fungus & applying two coat ofliquid polyurethane membraneof smart care damp block 2Ka two component acrylic polymer modified cementious high performance coating to be appliedby roller/brush and timing for applying the coat is to be between4 to 6 hrs (1st & 2nd coat) complete all as specified and directed. |
| 104 | M & L for structural steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) includingdistance pieces, cleats etc Fe 410 -W (GdeE- 250) quality complete all as specified and directed |
| 105 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar,complete all as directed |
| 106 | M&L Brickwork with fly ash bricks, straight or curved on plain exc 6m mean radius, built in cemrent mortar 1:4 complete all as specified and as directed. |
| 107 | M&L Reinforced concrete pipes, class NP3 150mm bore, laid and jointed complete with collars etc complete all as specified and as directed |
| 108 | Taking down plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. in cement lime or cement mortar including removal of spoil/ demolished material out of the premises of the site complete all as specified and as directed. |
| 109 | M&L Rendering 10 mm thick in CM 1:3 oncelling surface, finished even and smooth with out using extra cementup to ht 6.5 m all as specified and directed. |
| 110 | M&L Rendering 15mm thick in CM 1:4 on fair faces of brickwork or concrete surfaces finished fair and even up to ht 6.5mtr all as specified and as directed. |
| 111 | M&L Rendering 15 mm thick in CM 1:6 onbrick massonry surfaces of walls, finished even and smooth with out using extra cementall as specified and directed. |
| 112 | M&L preparation of newly plastered surfaces of walls including cornices and applying two coats of oil bound distemper over a coat of primer and chalk whitingwith using of all fixtureswhich are necessary for execution of work and leaving premise,clean and tidy all asspecified & directed |
| 113 | M&L preparation of newly plastered surfaces as in ceiling and applying two coats of oil bound distemper over a coat of primer and chalk whitingwith using of all fixtureswhich are necessary for execution of work and leaving premise,clean and tidy all asspecified & directed |
| 114 | M&L Complete removal of existing treatment on walls complete all as specified and as directed. |
| 115 | M&L for two coats of Oil bound distempering over a coat of primer over 3mm thick wall putty withwhite or tinted on walls complete all as specified and as directed. |
| 116 | M & Lfor Preparing of old/new plastered surfaces of stone/brick and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified |
| 117 | M&L preparing old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paintwith using of all fixtureswhich are necessary for execution of work and leaving premise,clean and tidy all asspecified & directed |
| 118 | M&L preparation of previously treated wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint with using of all fixtureswhich are necessary for execution of work and leaving premise,clean and tidy all asspecified & directed |
| 119 | M & L for providing and fixing stainless steel (Grade 304) railing made of hollow/square tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, includin fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed |
| 120 | Taking down carefully existing unserviceablealuminum/copperpoint wiring (light, fan, socket or power) of any description & in anyposition complete including all fittings& fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etcincluding taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed |
| 121 | M&L for point wiring with 1.5 Sqmm (nominal area) multi stranded copper conductor, single core, FR-LSH PVC insulated & unsheathed cable in accordance with relevant IS with proper colour coding, 1100 volts grade drawn in ISI marked MMS grade PVC conduit of dia 20mm minimum/ casing capping , 1.2 mm thick minimum, 20mm width minimum with double locking arrangement, surface type terminated in sunken type GI sheet metal flush boxes of 16 Gauge (i.e. 1.6mm thickness) including all accessories andusing 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FR-LSH PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxesto required depth and core cutting wherever required & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. If the building is stone masonry, diamond tools must be used to cut the surfaces.(ii) The decision of casing capping/PVC conduit rests with the Engineer-in-charge.For casing capping, screws of minimum 35x8mm and suitable plugs should be used for fixing. In case of stone walls, wooden gutties shall be grouted in wall for fixing of screws. Distance between 2 screws shall not be more than 600mm. Size of Trunking shall be correct depending on number of wires to be drawn as per SSR Part1 but not less than 20mm.(ii)Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A\".(iii) The quoted rates shall be deemed to be inclusive for provision and installation of conduits, covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame and modular metal flush box. All metal boxes and plates to be of the same make as the switches mentioned in this schedule.(iv) Insulation resistance test: All wiring shall be tested with 500V Meggar between phases, phase – neutral and to Earth. IRvalue shall not be less than 1M-ohm. |
| 122 | One light point controlled by one; one way switch. |
| 123 | One buzzer point controlled by one; one way switch. |
| 124 | One fan/exhaust fan point controlled by one, one way switch |
| 125 | One 3 pin socket out let 5 amp point on the (same board) with other switches. |
| 126 | One 3 pin socket outlet 5 amp point on the independent board |
| 127 | All as per item No. 120 here-in-before butwith 2.5 sq mm size FRLSH PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board. |
| 128 | All as per item No. 120 here-in-before butwith 4 sq mm size FR-LSH PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3pin 15A socket outlet for ACs and geysers |
| 129 | S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specifiedanddirected. |
| 130 | Supply and fix modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge. |
| 131 | Supply and fix modular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge. |
| 132 | Supply and fix modular bell switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge |
| 133 | Supply and fix modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge |
| 134 | Supply and fix modular socket, 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge |
| 135 | Supply and fix modular fan regulator 100 W 2 module, socket type and capacitive type all as specified and directed by Accepting officer |
| 136 | S & F call bell, ding dong AC 230 Volt single pole complete as specified. |
| 137 | S&F 16 Amp 30mA PRCD Adaptor (White) - Plastic Body, ISI marked, Auto-Trip, with safety shutter adhering to IEC 61540, IP40, built in test and reset buttons complete all as specified and directed. |
| 138 | S & Fearth plug and socket, single pole, neutral sheet metal enclosures with a two pin, plug and socket 20Amp, 240 voltswith and including one MCB, SP, 20A, 240 Volts complete all as specified and directed. |
| 139 | S & F 4ft 20W LED batten tubelightsurface/wall mounted with powder coated Aluminium housing, high optically efficient polycarbonate diffuser, inbuilt electronic driver duly wired upto terminal block, luminous efficiency > 100 lm/watt, surge protection upto 4kV, 440V High voltage protection, power factor > 0.95, CRI > 80 all as specifiedanddirected. Model: Crompton Linea Pro or similar |
| 140 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete, all as specified and directed. |
| 141 | S&F lamp holder PVC / Polycarbonate type with cord grip cap suitable with T shape B22 LED lamp fitting 12 Watt including the lamp complete all as specified and directed by Engr-in-charge |
| 142 | Taking down distribution boards / main switches of any type, size and capacity complete all as specified and directed by Engr-in-charge |
| 143 | Taking down MCBs, metal clad plug of any type, size and capacity complete all as specified and directed by Engr-in-charge |
| 144 | Supply and fix distribution board double door type VTPN 4 waysheet steel powder painted with bus bar ,with RCBO incomer neutral link & earth bar etc. with IP 43 degree of protection flushing in wall including connecting up all incoming and outgoing cables/circuit wiring complete all as specified and directed by Engineer-in-Charge. |
| 145 | Supply and fix distribution board double door type VTPN 6 waysheet steel powder painted with bus bar ,with RCBO incomer neutral link & earth bar etc. with IP 43 degree of protection flushing in wall including connecting up all incoming and outgoing cables/circuit wiring complete all as specified and directed by Engineer-in-Charge. |
| 146 | Supply and fixing RCBO Double pole, 30mA, 40 Amps in `C’ series having current rating 10 KA complete all as specified and directed. |
| 147 | Supply and fixing RCBO Double pole, 30mA, 63 Amps in `C’ series having current rating 10 KA complete all as specified and directed. |
| 148 | S & Fsheet metal enclosure powder painted forMCB DB SPN08 way double door with IP-42 protectionwith Din rail and busbar complete all as specified and directed by Engr-in-charge. |
| 149 | S & Fsheet metal enclosure powder painted forMCB DB SPN06 way double door with IP-42 protectionwith Din rail and busbar complete all as specified and directed by Engr-in-charge. |
| 150 | Supply and fixing MCB SPN, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed. |
| 151 | S&F MCB single pole, 6 to 32 Ampsin `C’ series having current rating 10 KA complete all as specified and directed. |
| 152 | Taking Down Old Unserviceable Submain wiring complete including all accessories and making good the disturbed surfaces all as specified and as directed. |
| 153 | M/L for Sub main wiring with 2 runs of PVC insulated unsheathedmulti stranded single core copper conducter 4 Sqmm drawn through PVC conduit/casing capping including accessories with 4 sqmm PVC insulatedearth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiringand connecting up ,all as directed. Note: 2 runs of 4sqmm copper cable and one run of 4sqmm copper earth wire and conduit/Casing & Caping will be measured as one length. |
| 154 | M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire meshincluding necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle completeall as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’ |
| 155 | Taking down ceiling fan and removing fan and blades to store complete all as specified and directed by the Engineer-in-charge |
| 156 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated as per latest BEE norms in vogue at the time of supply with brushless direct current motor (BLDC) including taking down the existing ceiling fans and depositing it to E/M store complete all as specified and directed by Engineer-in-Charge.(as per latest authorization) |
| 157 | Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with suitable no of nuts, bolts and clamps complete all as specified and directed by Engr-in-charge |
| 158 | Disconnecting and removingceiling fan of any sweepany height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly, lubricating with approved lubricants, reassembling, refixing in original position includingminor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan includingpainting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified and as directed. |
| 159 | Taking Down water heater (Electric Geyser) storage type of any make of 25 / 50 ltr capacity after disconnecting the existing electrical connection along with earth plug socket if existing, water pipes and deposit to E/M store yard and and refixing in the original place/position duly connecting up water supply and electric supply etc.complete after cleaning externally complete all as specified and as directed. |
| 160 | Supply and fix electric water heater, vertical storage typewith ferroglass coated anti-rust inner container and heating element upto 2 KW capacity 25 litre, heavy duty anode rod, preset thermal cutout, BEE 5 Star rated as per latest BEE norms (i.e. standing losses ≤ 0.465 kWh/24 hour/45°C which is only valid till 31st Dec 2025, material shall be supplied as per latest revision at the time of supply, complete with all accessories such as safety valve, thermostat, NRV, connection piece(hot and cold water connection pipe)etc complete all as specified and directed by Engr-in-charge. Model: Havells Monza DX or similar in Bajaj/Orient (as per latest authorization) |
| 161 | Supply and fix of any length CPVC pipe of dia 20 mm dia manufactured as per IS : 15778including connection sockets, elbow and brass tee for connecting pipes etc and connecting pipe to inlet and outlet of the geyser complete all as specified and directed by Engr-in-charge |
| 162 | Supply and fix of any length GI pipe of dia 15 mm dia, ISI marked, medium grade including connection sockets, elbow and tee for connecting pipes etc to the existing pipeline including civil work required if any and connecting pipe to inlet and outlet of the geyser complete all as specified and directed by Engr-in-charge |
| 163 | Supply and fix stop valve of dia 20 mm with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed by Engr-in-charge. |
| 164 | Supply and fix bib tap of dia 20 mm cast iron alloy with crutch or butterfly handle screwd for iron pipe to outlet pipe of geyser complete all as specified and directed by Engr-in-charge. |
| 165 | Supply 12\" gold life smart down rod (Anti suicide fan rod) MS pipe zinc plated, 19mm OD, 1.8+/- 0.05mm thick, spring set grade 3 carbon steel material zinc plated, MSME tested for performance test and opening at impact load of 22 kgf + and spring hidden in pipe will expand to about 1 mtr or more, powder coated white colour for ceiling fans of any size with all accessories complete all as specified and directed by Engineer-in-Charge. |
| 166 | M&L for cutting round holes suitable for fixing of exhaust fan of size 300 mminto through stone walls built in cement mortar or cement lime mortar and making good in cementmortar 1:3 or cement concrete 1:2:4 type B1 as required and plastering in CM 1:4 external / internal surfaces and finished to match with the existing surfaces complete all as specified and directed by Engr-in-charge. |
| 167 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep heavy duty with, blades, and frame and louvers including taking down the existing U/S exhaust fan and depositing to MES E/M store complete all as specified and directed by the Engineer-in-charge (as per latest authorization) |
| 168 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 150mm complete all as specified and directed by the Engineer-in-charge (as per latest authorization) |
| 169 | Supply and laying FRP powder coated cable tray with cover, perforated type, 100mm, sheet thickness minimum 4mm including coupler plates, elbows, tees, reducers, bolts, nuts, washers and other accessories conforming to NEMA/ASTM/BIS standards complete all as specified and directed by the Engineer in charge |
| 170 | S&F Reading lights with 3W, 240V AC, 4000K flexible reading lights complete all as specified and directed (Philips Model No. 30975 or equivalent) |
| 171 | Supply and fix in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 25 sqmm 4 core ISI marked complete all as specified and directed |
| 172 | Excavation in trenches not exc 1.5 wide and not exc 1.5 mtr deep and getting out in hard /dense soil for laying pipes complete all as specified . |
| 173 | Supply and fill riddled soil obtain from excavated soil upto depth of 30cm (8cm below cable and remaining above cable) for cushioning of cable complete in respect all as specified and as direcred by Engr-in-Chrage. Note :Excavated soil shall be riddled by using sieve to seperate composite particles etc as per IS 1255:1983 and refilling in trenches as in cable cushioning. |
| 174 | Returning and filling in soils , includingspreading ,levelling ,wateringand well ramming in layersnot exc25 cm thick completeall as specified and directed . |
| 175 | Removal of excavated material to a distance not exc 50 mtr away from starting pointand depositing where directed at a level notexc 1.5 mtr above the starting pointcomplete all as specifiedand directed . |
| 176 | Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specifiedand directed by the Engineer-in-charge |
| 177 | Supply and lay GIpipe light grade 40mm dia laid in trenches/concealed in wall for cable protection complete all as specified and directed by Engr-in-chagre. |
| 178 | Supply and Lay in replacement forGalvanized Iron water tubing \" Medium Grade\" in accordance with IS 1239:latest with all fittings laid in trenches for following sizes Complete all as specified and directed. |
| 179 | (a) 80mm dia pipe |
| 180 | (b)50 mm diapipe |
| 181 | (c)40 mm diapipe |
| 182 | (d)25 mm diapipe |
| 183 | M & L Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 25 mm dia ISI marked complete all as specified and directed by Engr-in-charge. |
| 184 | M & L Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 40 mm dia ISI marked complete all as specified and directed by Engr-in-charge. |
| 185 | Supply and fixDI sluice valve 80mm dia complete with iron wheel head , bronze body seat ring,stainless steel non-rising spindle and check nut , includingjointing material such as rubber insertionnutboltswashers gas kitetc ISI marked, PN 1.6, conforming to IS 14846 and making arrangement for safe working complete all as speciifed and directed |
| 186 | Cutting of DI/CI/GI mains 80mm in position for insertion of new tees, tail pieces , sluice valve etc for following sizes all as specified and directed. |
| 187 | Material & labour brick masonry valve pit of size 90 cm x 90 cm x 90 cm (internal size) with mild steel cover 6mm thick and angle iron frame of size 90 x90 cm x 6mm duly painted with two coats of synthetic enameled paint over a red oxide primer including locking arrtangement, brick work and all inner suraces of pit and exposed portion of out side shal be plastered in cement motor (1:4) complete all as specified and directed. |
| 188 | Boring of holes under road, pavement, hardstanding by trenchless technology using ultrasounding technique and necessary machine including HDPE pipe of 150mm dia suitable for 0.4 mpa working pressure completeall asspecified and directed |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
