Tender For Civil And Installation Of Fountain Work In The J.C. Bose University Of Science And Technology, Ymca Faridabad - Providing And Fixing Of Glass Mosaic Tiles Complete In All Respect With The Prior Approval Of Eic. 2 Jet Nozzles, Manifold, Feeder, Faridabad-Haryana
TDR : 51847103
Tender Notice
BOQ
Expired
Faridabad
Haryana
Tender For Civil And Installation Of Fountain Work In The J.C. Bose University Of Science And Technology, Ymca Faridabad - Providing And Fixing Of Glass Mosaic Tiles Complete In All Respect With The Prior Approval Of Eic. 2 Jet Nozzles, Manifold, Feeder
Name of Work:Civil and Installation of Fountain work in the J.C. Bose University of Science and Technology, YMCA Faridabad.
Sl. No.
Item Description
1
Providing and Fixing of Glass Mosaic tiles complete in all respect with the prior approval of EIC.
2
Jet Nozzles, manifold, feeder and grid pipe work, accessories:Feeder pipe work and manifold shall be made of SS304 with accessories like flanges, grouting/supporting stands etc.. Grid pipework, on which effects/nozzles will bemounted/fixed, shall be made of SS304.Pipe thickness 65mm.Nozzles: Made of brass- chrome plated.Gunmetal wheel valves- make Sant/Zoloto ISI markEarthing of Fountain`s Electrical panel (2 nos)Effects:Jet Nozzle 07Total 07Height of spray 600mm. complete in all respect with the prior approval of EIC.
3
Submersible Pump(s) with mounting frame made of galvanised steel.Stainless steel (SS-304) Strainer/filter for pump(s)` with SS-304 mesh and SS-304frame. Pump(s): Total 05 HP submersible pump.Make of submersible pump(s): Kirloskar/Crompton Greaves/KSB/Texmo/CRI complete in all respect with the prior approval of EIC.
4
Lights: Total 23 nos. waterproof LED light fixtures (RGB).Specification of each light fixture: Complete body made of Stainless steel 304 grade, total 27watt RGB power leds, IP68 COMPLIANCE CERTIFICATE, IF Forwardcurrent- 700mA,VF-Forward Voltage 2.5v,3.6v,3.5v, OPERATING VOLT12volt DC.Light Controller - 01Total Height- 600mmTotal Diameter- 125mmTop Plate Diameter- 125mm (3mm thickness) Top Plate Inner Diameter- 83 mmMain Body Top Diameter- 125mm (12mm thickness) Main Body Inner Depth48mmMain Body Lower Outer Diameter- 90 mm Bottom Hole for Gland Size- 10mmSS Gland Size- 10 mmL Key Nut Bolt SS- 6 Nos.LED 3 Watt Each. Make:- Edison/equivalent- 9 Nos. Toughened Glass-5 mmHeat Sink- 40 mm Height x 45 mm Diameter Heat Sink for PCB - 85mm DiameterU Clamp Made of SS- 1 No. complete in all respect with the prior approval of EIC.
5
Electrical Panels: Panel for submersible pump(s):Mild steel (Epoxy powder coated) enclosure made from 16 SWG Mild Steel sheet consisting of motor main switch, ammeter, voltmeter, single phase preventer, selectorswitch, Terminal connector, Star-Delta Timer, Start-Stop Switches, indicating lampsetc. of 5 HP complete in all respect with the prior approval of EIC.
6
Copper conductor cables of different sizes for submersible pump(s) 2.5mm x 3 core(flat cable 50m), LED Lights 1.5mm x 4 core (100m). Make: Havells/Finolex/Polycab and condute Pipe complete in all respect with the prior approval of EIC.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
