Tender For Various Civil Maintenance Work At Itwari Subdivision Nagpur, Dist. Nagpur, Nagpur-Maharashtra

tender for various civil maintenance work at itwari subdivision nagpur, dist. nagpur removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. 6.00 no. 164 984 2 removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete. 5.00 no. 139 695 3 providing second class burnt brick masonry with conventional/ i.s. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. complete 4.17 cum 8777.00 36617.64 4 providing internal cement plaster 6mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. 10.00 sqm 216.00 2160.00 5 providing internal cement plaster 12mmthick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. 38.00 sqm 310.00 11780.00 6 providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make, etc complete. 254.00 sqm 95 24130 7 providing and applying priming coat on concrete/ masonary/ asbestos cement plasteredsurfacesincludingscaffoldingifnecessary, preparingthesurfacebythoroughly cleaningoil, grease, dirt andother foreignmatter and sandpaperingas requiredetc. 254.00 sqm 38 9652 8 providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. 254.00 sqm 50 12700 maharashtra state electricity distribution company limited. civil construction cum maintenance division nagpur. name of work :- various civil maintenance work at itwari sub-division nagpur, dist. nagpur. schedule-b page 1 of 5 eec/ngp/e-t-43/2025-26 page 34 of 40 9 providing and fixing solid core flush door shutter commercial in single leaf 32 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete. 2.36 sqm 3059 7219.24 10 providing and fixing m40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to i.s.65241983 having 6mm dia. bars 3 nos. and stirrups @250mmc/c and fixing in wall with 6 nos of hold fast of 12mmdia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm .11 6.00 rmt 1119 6714 11 providing and fixing in position. (as per i.s.1868/1982)aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02mm at weight 0.547 kilogram/onerunning metre .and window frame bottom track section 61.85x31.75x1.20mm at weight 0.695 kilogram/one running metre. top and side track section 61.85 x 31.75 x1.30mm at weight 0.659 kilogram/one running metre. the shutter should be of bearing bottom 40 x 18 x 1.25mm at weight 0.417 kilogram/one running metre. inter locking section 40x18x1.10mm at weight 0.469 kilogram/one running metre .and handle section 40x18x1.25mm at weight 0.417 kilogram/one running metre. and top section 40x18x1.25mm at weight 0.417 kilogram/runningmetre. as per detailed drawings and as directed byengineer in charge with all necessary aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5mm thick plain glass with all required screw sand nuts etc, complete. with 5 sqm 5548.00 27740 12 providing and fixing in position powder coated aluminium louvered windows/ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80x38mmx1.22mm box type, 5mm thick sheet glass louvers, of approved quality etc. complete. 2.00 sqm 3640 7280 page 2 of 5 eec/ngp/e-t-43/2025-26 page 35 of 40 13 providing and fixing p.v.c./ synthetic tiles 1.50mm thickwith ready made adhesive including cleaning surface before laying, etc. complete. spec.no.: as directed by engineer- in-charge. 97.00 sqm 722 70034 14 providing and fixing in position extruded aluminium partitions having frame made out o f extruded tubular section of size 65mm x 40 mm with 12mm thick three layered flat pressed teak wood particle board bonded with bwp type exterior grade phenol formaldehyde synthetic resin conforming to is 129231990, laminated on both sides ,novateak o r equivalent with aluminium glazing clips of size 12mmx12mm (conical) as per drawing etc. complete. 8.00 sqm 4166 33328 15 providing and laying matt finish ceramic tiles of having size 30cmx30cm confirming to i.s.15622/2006 (groupdii-a) and 7to8mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. 4 one square metre 1241 4964 16 providing and laying ceramic tiles having size30cm.x45cm. confirming to corresponding i.s. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. 8 one square metre 1318 10544 17 providing and fixing european typewall-hung white water closet of approved make with push valve concealed type with coverplate 32mm size of approved make including soilpipe ,vent pipe upto outside face of wall,100mm dia.g.i.plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. 1.00 one number 15777.00 15777.00 18 providing and fixing15 mmdia. screw downbib/stop tap of brass including necessary socket union nut complete. 2.00 one number 705.00 1410.00 page 3 of 5 eec/ngp/e-t-43/2025-26 page 36 of 40 19 providing and fixing white glazed earthenware wash hand basin of 55cm.x40cm. size including cold water pillar tap/cold and hotwater pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipeconnections including p.v.c. wastepipe and trap upto the outside face of the wall. making good the damaged surface, testing etc. complete. 1.00 no. 5879.00 5879.00 20 providing and fixing 450mmx550mm size superior type belgium mirror with 16mm dia. nickel plated towel rod etc. complete. 1.00 one number 904.00 904.00 21 providing and fixing on walls/ ceiling/ floor 20 mm dia. cpvc pipe with necessary fittings, remaking good the demolished portion etc.complete. including removing existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed etc. complete. 18.00 rmt 326.00 5868.00 22 providing and laying in trenches 15mm dia. cpvc pipe including necessary excavation, fittings. refilling trenches etc.completeincluding removing existing pipeline if necessary and conveying and stacking the same in pwd chowky or as directed etc. complete. 8.00 rmt 279.00 2232.00 23 providing and fixing 10 cm pvc nahani trap with grating etc. complete 1.00 no. 566.00 566.00 24 providing and fixing false ceiling of 12mm thick as per drawings including powder coated g.i. wall angle of 20mmx20mmsize, g.i. grid runners of size 20mmx38mm at 600mm center to center both way sand suspended using g.i. 3mm wire including fixing using butterfly clips and fasteners including transporting, scaffolding all necessary labour and machinery, finishing etc. complete. 4.25 one square metre 1603.00 6812.75 25 providing and constructing brickmasonry inspection chamber 60cm x 45cm x 90cmincluding 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half roundg.s.w.pipes,brickmasonry,plasteringfromins ideandwithframefixedin cement concrete with r.c.c. cover medium duty 140kilogramwith frame etc complete. 1.00 no. 9618.00 9618.00 page 4 of 5 eec/ngp/e-t-43/2025-26 page 37 of 40 26 shifting of material from existing office for renovation and after renovation it should be shifted etc. complete. 1.00 job work 3075.00 3075.00 27 providing skilled labour (carpenter/ plumber)for various works with necessary t and p including all accessories, labour charges..etc complete as directed by engineer in-charge. 1.00 job work 1354.00 1354.00 28 transportation of all types of scrap material obtained from debris of various sort waste garbage material including necessay excavation/loosing including loading/ unloading and conveying and desposing as directed including royalty charges( gate pass compulsory without gate pass payment

INR 590 /-

INR 3.25 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB