Tender For Construction of Kondwada Jalochi, Gat No-104, Open SpaceFor Baramati Municipal Council, Baramati, Dist. - Pune - Removing chainlink fencing with iron/C.C. fencing post and stacking the materials as directed with all leads, lifts etc. complete. 2 Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. SSR Item No - 46.13 3 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) (SSR I. No. 21.02) 4 Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means (SSR I. No. 21.06) 5 Excavation for foundation in Soft rock and old cement and lime masonary foundations including removing the excavated materials upto a distance of 50 mtrs. Beyond the building area and stacking as directed including dewatering preparing the bed for foundation and necessary back filling, with available earth murum, ramming, watering including shoring and strutting etc. complete. (Lift from 0.0m To 1.5 m) By Mechanical Means (SSR I. No. 21.14) 6 Conveying the excavated materialincluding all lifts for a lead up to 3.00 kms. (SSR P. No. 559) 7 Filling in plinth and floors with approved excavated material in15cm.to20cm.Layers including watering and compacting etc. complete. 8 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15cm to 20cm thick including hand packing and compacting etc. complete. (SSR I.No. 21.38) 9 Providing and laying Cast in situ / Ready Mix cement concrete in M-10 of t rap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR. I. No. 24.01) 10 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregatePlum Concrete With 20% Rubble100 mm Plum (Crushed sand VSI Grade)(SSR. I. No. 24.04)+(SSR. I. No. 31.38) 11 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork, cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR I.No. 25.13) 12 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C.columns as per detailed designs and drawings or as directed including steel centering,formwork,cover blocks,laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finishis tobe provided and curing etc.complete,(Excluding reinforcement and structural steel).with fully automatic microprocessor based PLC with SCADA enabled reversible DrumType mixer/concrete Batch mix plant(Pan mixer)etc.complete.With fine aggregate (Crushed sand VSI Grade) 13 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR I.No. 25.52) 14 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR I.No.25.72) 15 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC without SCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed etc) SSR I. No. 26.07 16 Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/granite/quartzite/gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering,formwork,cover blocks, laying/pumping, compacting,curing, finishing and roughening them if special finish is tobe provided and curing complete .(Excluding reinforcement and structural steel).with fully automatic microprocessor based PLC with SCADA enabled reversible DrumType mixer/concrete Batch mixp lant(Panmixer)etc.complete.With fine aggregate(Crushed sand VSI Grade) (SSR I.No. 26.23) Ground Floor 17 Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR I.No.26.19) 18 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (SSR I. No. 26.33) 19 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.(SSR I.No27.01) 20 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete (SSR I.No. 27.05) 21 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. (SSR I. No. 32.11) 22 Providing fine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc. complete.(SSR I. No. 32.21) 23 Providing Uncoursed rubble masonary of trap / granite / quartzite / gniess stones in cement morter 1:6 in foundation & plinth of inner walls, in plinth of external walls including balling out water, striking joints on un expoed faces & watering complete.(SSR I. No. 28.04) 24 Providing and erecting chainlink fencing 1.6M. height with G.I. chain link of size 50x50mm, 8gauge thick and fixed 75mm above ground level on vertical M.S.Angles of 40x40x6mm size, includind excavating pits for foundation and embedded in C.C.block of 1:4:8 mix of size 450x450x670mm. at 1.75M.c/c with iron bar16mm dia as hold fast including welding link with angle frame at 30cmc/c with nuts and bolts and horizontal M.S.Angles at top and bottom of 25x25x5mm size and vertical M.S.flat 35x5mmand25x5mm horizontal including cross support of 40x40x6mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450x450x670mm including 3 coats of oil painting etc. complete. (SSR I.No. 46.39 ) 25 Providing and erecting chainlink fencing 1.6M. height with G.I. chain link of size 50x50mm, 8gauge thick and fixed 75mm above ground level on vertical M.S.Angles of 40x40x6mm size, includind excavating pits for foundation and embedded in C.C.block of 1:4:8 mix of size 450x450x670mm. at 1.75M.c/c with iron bar16mm dia as hold fast including welding link with angle frame at 30cmc/c with nuts and bolts and horizontal M.S.Angles at top and bottom of 25x25x5mm size and vertical M.S.flat 35x5mmand25x5mm horizontal including cross support of 40x40x6mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450x450x670mm including 3 coats of oil painting etc. complete. (SSR I.No. 46.39 ) Labour rate 26 Providing and fixing 50 mm. dia. medium class G.I.pipe gate with wicket gate of approved drawing with all fixtures and fittings in two leaves with strong hold fast embedded in c.c. block at top and bottom with locking arrangement including cutting, bending, making holes and with one coat of primer etc. complete.(SSR I. No.23.05) 27 Providing and laying in-situ M35 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. 28 Providing and laying machine cut machine polished Machine cut Kota stone for treads and risers of steps and staircase with rounded nosing for the treads on a bed of CM 1:4 including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. (SSR I.No.33.18) 29 Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing etc. complete. SSR I. No. 32.17 30 Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusiv e of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. Number : As directed by Engineer-in-charge. SSR I. No. 23.07 31 Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms/sq.mt. total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyester paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 kg/sqm).(SSR I. No. 38.34) 32 Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. (SSR I. No. 32.07) 33 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.(SSR I. No. 31.04) 34 Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. (SSR I.No.39.68) 35 Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.(SSR I.No.40.01) 36 Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box (SSR I. No. 39.40) 37 Providing and fixing water proof door shutter in single leaf 35mm thick, without ventilator with fiber coating on both side, including wrought iron hold fast and stainless steel fixtures as per Directed by Engineer In Charge etc. complete(SSR I. No. 39.13) 38 Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm .SSRI. No. 39.56 39 Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete(SSR. I.No. 33.24) 40 Providing and laying machine cut machine polished Kota stone flooring 25mm to 30mm thick in required width in plain / diamond pattern on bed of 1:6 cement mortor including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete.(SSR I. No. 33.06) 41 Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. (SSR I.No.33.25) 42 Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc.complete.(SSR I.No.35.21) 43 Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete (SSR I.No.36.11) 44 Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item One Number 15 to 18 prior approval of Superintending Engineer will be necessary(SSR I.No.35.26) 45 Providing and applying two coats of synthetic enamel paint of approved colour to new / old structural steel work and wood work in buildings, ncluding scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. SSR I. No. 35.07 46 Providing and fixing hume pipe septic tank 1200mm diameter with vent pipe and cap including necessary (including excavation and laying)(SSR I. No.42.18) 47 Providing and fixing 10 cm PVC nahani trap with grating etc. complete.(SSR I. No.42.67) 48 Providing and fixing white glazed earthen ware Wash Hand Basin of 55cm.x40cm. size including cold water pillar tap / cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap upto the outside face of the wall. Making good the damaged surface, testing etc. complete. (SSR I. No. 41.63) 49 Providing and fixing Anglo Indian type white glazed earthenware water closet pan with trap with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall with flushing cistern and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use) (SSR I. No. 43.23) 50 Providing and fixing H.D.P. container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters. (SSRI. No. 42.53) 51 Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (SSRI. No. 42.57) 52 Providing and fixing 100mm dia stabiliser pipe / P.V.C. soilvent / waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete (SSR I. No. 42.52) 53 Providing and fixing 25 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. (SSR I. No. 41.42) 54 Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.(SSR I. No. 41.40) 55 Providing and laying concrete pipes of I.S.NP. class of 150mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. (SSR I. No. 42.07) 56 Providing and constructing brick masonary inspection chamber 60cm x 45 cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, brick masonary, plastering from inside and airtight C.I. lid 75 kg with frame fixed in cement concrete etc. complete. (SSR I. No. 42.10) 57 Drilling of Bore Well Drilling of Bore well 150mm dia by D.T.H. machine, including transportation of machine at work site. MJP Ele. SSR I.No.BW1 58 Supplying and erecting DOL starter to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil and over load element with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser. (MJP DSR P.No. 48/I.No.LG 1-1) Upto 7.5 HP 59 Supplying and erecting submersible pumpset of 1.5 KW/2 HP with 230 V, 50 c/s AC supply suitable for 100 mm dia. borewell suitable for 85 to 170 LPM discharge at 32 to 12 m head & (max. efficiency at 24 m head & 130 lpm) discharge & delivery pipe of Size-50 mm diameter with a necessary H type clamps as per specification no. WP-SMP PWD Elect SSR I. No.12-2-38 60 Supplying & erecting PVC unarmoured cable1100 volt grade with I.S.I.mark 2core 4sq.mm stranded/solid.aluminium conductor complete erected on 12mm thick TW batten duly varnished/painted & with 32 SWG 8mm aluminium clips and brass nails on wall/ceiling RCC slab with continuous 12 SWG GI earth wire in an approved manner..2 core 4 Sq.mm copper cable. (SSR P.No.103/I.No.7-1-2(A) 61 Point wiring for light /fan /bell in 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm (2+1E) FR grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW PWD Elect. DSR 21-22 I. No. 1-9-5 P. no. 17 62 Point wiring for independent plug in 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm (2+1E) FR grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW PWD Elect. DSR 21-22 I. No. 1-9-7 P. no. 17 63 Supplying & erecting 5W-7W, 230V integral type LED Lamp suitable for B-22/E-27 base.PWD Elect. DSR 21-22 I. No. 2-10-10 P. no. 42 64 Supplying and erecting LED Flood light fitting of 30-40W, including lamp, with PF > 0.95,class IP 65 and above class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2. 2-5-12 P. no. 35 65 Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP PWD Elect. DSR 21-22 I. No. 9-1-1 P. no. 160 66 Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SWSWR/MCB PWD Elect. DSR 21-22 I. No. 5-3-3 P. no. 96 67 Supplying, erecting & terminating XLPE armoured cable 2 core 4 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL PWD Elect. DSR 21-22 I. No. 7-1-4 P. no. 125 68 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) (SSR I.No.39.24) 69 Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc.as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixingin position making riveted/bolted/welded connections without connecting plates, bracesetc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. (SSR I.No.23.01) 70 Planting large flowering/ Shedy Tree : (Minimum height 2.00mtr.) Digging pit with size 0.90m x 0.90m x 0.90m removing and conveying unwanted stuff to a require distance as directed. Filling the pit with approved excavated material upto a height of 0.30m and remaining height of 0.60m with fresh garden soil and manure in 3:1 proporation. Mixing soil and manure thoroughly well, levelling as directed. watering on previous night. Planting two or three year old minium 2.0m height healthy tree saplings are as per specification. Maintaining till well established by watering, weedings, stirring, of soil stacking, replacing of casualties etc. complete.
