|
| 1 | Item No.1:- Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete |
| 2 | Item No. 2:-Excavation for foundationin soft rock including shoring and strutting as necessary and disposing off excavated stuff as directed etc. complete. |
| 3 | Item No.3:- Excavation for foundation in hard rock by blasting including shoring and strutting as necessary and disposing off excavated stuff as directed etc. complete. |
| 4 | Item No.4:-Providing and laying in situ / ready mix / ready mix M15 CC of trap/ granite /quartzite /gneiss metal for the bottom plugs of wells in the dry condition including compaction and curing wherever necessary etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer)with natural/artifical sand) |
| 5 | Item No.5:-Providing and laying in situ / ready mix M-20 plain cement concrete of trap /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. including provision of \"V\" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/steelform work centering ( excluding dewatering by means of pump) and including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by engineer in charge basic rate shall be increased for height above 5.00 m in followinh manners (a) Height upto 5 M. (With Concrete Mixer)With Natural / VSI standard Artificial Sand |
| 6 | Item No.6:-Providing and laying weep holes of 100 mm diameter AC/PVC pipes as per drawing for abutment returns, return walls etc. Complete. |
| 7 | Item NO:7Providing and erecting structural steel for sakav with all bracing gusset plates etc. as per detailed design and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/welded connection and oil painting with 2 coats of approved quality and shade etc. complete. complete. |
| 8 | Item No.8:- Providing, cutting, bending, hooking, tyingand laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete. |
| 9 | Item No.9:-Providingearthworkinembankmentwithapprovedmaterialsobtainedfromdepartmental landuptoleadof50m.includingalllifts,layinginlayersof20cm.to30cm.thickness breakingclods,dressingtotherequiredlines,curves,grades§ion,wateringand compaction with vibratory roller to achieve not less than 97 % of standard proctor density etc. complete.(Material obtained from departmental Land) |
| 10 | Item No.10:-Providingdryrubblestone pitching23cm (about9)thickincludingallmaterial,quarry spalls, labour etc. complete. |
| 11 | Item No.11:- Providing and fixing 45 cm x 60 cm Marble plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete |
| 12 | Item No 12:- Quality control testing charges (compressive strength og c.c. cube (set of 3 cubes) |
| 13 | Item No 13:- Quality control testing charges STEEL ANTI CORROSIVE TEST- (Resistance to applied Voltage. ( 1 Hr. Test )(Set of 2 Bars)) |
| 14 | Item No 14:-Reimbrsement of royalty charges if contractor provides orignal royalty challan from revenue department.Sand |
| 15 | Item No 15:-Reimbrsement of royalty charges if contractor provides orignal royalty challan from revenue department Rubble. |
| 16 | Item No.16 :Add 18 % For GST Charges |
| 17 | Item No. 17Add 0.5 %For Labour Insurance Charges |
| 18 | Item No. 18 :Add 1 % For SQM Charges |
