|
| 1 | Item Description |
| 2 | Earth work in Excavation for pipe trench in all kinds of soil and WBM in areas including dressing, watering and ramming and disposal of Excavated earth lead upto50metersandliftupto1.5m,disposalearthtobeleveled,neatly dressed. USOR. Item.no. 16.4 -P.no.207 |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. Soft rock with or without blastingorbituminouspavement/cementconcreteroadInordinaryorSoft rock with or without blasting or bituminous pavement / cement concrete road.USOR. Item. no. 16.6-(a) P.no.208 |
| 4 | Demolishing cement concretemanually /by mechanicalmeans including disposal of material within 50 mleadasper directionofengineer-in-charge. Nominal concrete 1:3:6 or richer mix (i/cequivalent designmix) USOR. Item.no.16.15.1-P.no.209 |
| 5 | Providing&layingmechanicallymixedcementconcrete20mmnominalsize graded crushed stone excluding costof centering& shuttering.1:2:4 (M-15). USOR.Item.no. 16.23 (a) (II)-P.no.210 |
| 6 | Providing, Laying, Jointing & field testing of PE pipes made from 100% virgin material (Earlier know as High Density Polyethylene pipes, PE 100 ) confirming to IS 4984/14151/ 12786/13488 with necessary jointing material llike mechanical connector of jointingpipes by heating to the ends of pipeswith the help of Teflon coated electric mirror/ heater to the required temperature and then mechanically pressing the ends together against each otherto form a monolithic & leak proof joint by thermosetting process. It] may be required to be done with Jack/ Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical iointed) USOR.6th AmendmentOFIssuedvide order no. 09 dt 07.01.2022Item.no.9.1 -P.no.9, 90 mm dia HDPE 6 Kg/cm² |
| 7 | Providing, Laying, Jointing & field testing of PE pipes made from 100% virgin material (Earlier know as High Density Polyethylene pipes, PE 100 ) confirming to IS 4984/14151/ 12786/13488 with necessary jointing material llike mechanical connector of jointingpipes by heating to the ends of pipeswith the help of Teflon coated electric mirror/ heater to the required temperature and then mechanically pressing the ends together against each otherto form a monolithic & leak proof joint by thermosetting process. It] may be required to be done with Jack/ Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical iointed) USOR.6th AmendmentOFIssuedvide order no. 09 dt 07.01.2022Item.no.9.1 -P.no.9, 110 mm dia HDPE 6 Kg/cm² |
| 8 | Providing, Laying, Jointing & field testing of PE pipes made from 100% virgin material (Earlier know as High Density Polyethylene pipes, PE 100 ) confirming to IS 4984/14151/ 12786/13488 with necessary jointing material llike mechanical connector of jointingpipes by heating to the ends of pipeswith the help of Teflon coated electric mirror/ heater to the required temperature and then mechanically pressing the ends together against each otherto form a monolithic & leak proof joint by thermosetting process. It] may be required to be done with Jack/ Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical iointed)USOR.6th AmendmentOFIssuedvide order no. 09 dt 07.01.2022Item.no.9.1 -P.no.9 , 160 mm dia HDPE 6 Kg/cm² |
| 9 | Providing & fixing of following Ductile iron double flanged sluice valves as per I.S.:14846-2000 fitted with cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete, Class PN 10, 80mm dia, USOR 4.41 P- 71 |
| 10 | Providing & fixing of following Ductile iron double flanged sluice valves as per I.S.:14846-2000 fitted with cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete, ClassPN 10,100 mm dia, USOR 4.41 P- 71 |
| 11 | Providing & fixing of following Ductile iron double flanged sluice valves as per I.S.:14846-2000 fitted with cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete, Class PN 10,150 mm dia, USOR 4.41 P- 71 |
| 12 | Providing and laying including testing Bend 90̊ confirming to IS specifications.USOR. 6thAmendmentOFIssuedvide order no. 09 dt 07.01.2022Item.no.9.2 -P.no.9 , 90mm dia 6 kg/sq.cm |
| 13 | Providing and laying including testing Bend 90̊ confirming to IS specifications.USOR. 6thAmendmentOFIssuedvide order no. 09 dt 07.01.2022Item.no.9.2 -P.no.9110 mm dia 6 kg/sq.cm |
| 14 | Providing and laying including testing Bend 90̊ confirming to IS specifications. USOR.6th AmendmentOFIssuedvide order no. 09 dt 07.01.2022Item.no.9.2 -P.no.9 160 mm dia 6 kg/sq.cm |
| 15 | Providingandlayingincluding testing Bend45confirmingtoISspecifications. USOR. 6thAmendmentOFIssuedvide order no. 09 dt 07.01.2022Item.no.9.3 -P.no. 1090mm dia 6 kg/sq.cm |
| 16 | Providingandlayingincluding testingBend45 confirmingtoISspecifications. USOR.6th AmendmentOFIssuedvide order no. 09 dt 07.01.2022Item.no.9.3 -P.no.10110mm dia 6 kg/sq.cm |
| 17 | Providingandlayingincluding testing equalteeconfirmingtoISspecifications. USOR 6thAmendmentOFIssuedvide order no. 09 dt 07.01.2022Item.no.9.4 -P.no.10 90 mm dia 6 kg/sq.cm |
| 18 | Providingandlaying including testingequalteeconfirmingtoISspecifications. USOR.6th AmendmentOFIssuedvide order no. 09 dt 07.01.2022Item.no.9.4 -P.no.10110 mm dia 6 kg/sq.cm |
| 19 | Providingandlayingincluding testing equalteeconfirmingtoISspecifications. USOR 6thAmendmentOFIssuedvide order no. 09 dt 07.01.2022Item.no.9.4-P.no.10 160 mm dia 6 kg/sq.cm |
| 20 | Providing and layingincluding testingreducer confirming to IS specifications. USOR6th AmendmentOFIssuedvide order no. 09 dt 07.01.2022Item.no.9.6 -P.no.1190 x75 mm dia 6 kg/sq.cm |
| 21 | Providing and layingincluding testingreducer confirming to IS specifications. USOR6th AmendmentOFIssuedvide order no. 09 dt 07.01.2022Item.no.9.6-P.no.11110 x90 mm dia 6 kg/sq.cm |
| 22 | Providing and laying including testing reducer confirming to IS specifications. USOR6th AmendmentOFIssuedvide order no. 09dt 07.01.2022Item.no.9.6 -P.no.11160x140mm dia 6 kg/sq.cm |
| 23 | Providingand layingincludingtestingEnd Cap confirmingtoISspecifications. USOR.6thAmendmentOFIssuedvide order no. 09 dt 07.01.2022Item.no.9.8 -P.no.11 ,90 mm dia 6 kg/sq.cm |
| 24 | Providing and laying including testing End Cap confirming to IS specifications. USOR. 6thAmendmentOFIssuedvide order no. 09 dt 07.01.2022Item.no.9.8 -P.no.12 110 mm dia 6 kg/sq.cm |
| 25 | Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinkingwater with in black/bluecolor manufactured from compoundedPE80/PE100virginpolymerandcompatiblewithPE80/PE100 pipes, in pressurerated SDR11 with minPN 12.5 ratedfor water application and shall be inclusive of all cost such as testing, all taxes related to central state &municipal,inspectioncharges,transportationuptosite,transitinsurance, loading, unloading, stacking etc. complete.Electro Fusion Coupler 90mm ,USOR. 6thAmendmentOFIssuedvide order no. 09 dt 07.01.2022Item.no. . 9.14.1.8- P.no.16 |
| 26 | Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinkingwater with in black/bluecolor manufactured from compoundedPE80/PE100virginpolymerandcompatiblewithPE80/PE100 pipes, in pressure ratedSDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, all taxes related to central state & municipal,inspectioncharges,transportationuptosite,transitinsurance, loading,unloading,stackingetc.complete. ElectroFusionCoupler110mm ,USOR. 6thAmendmentOFIssuedvide order no. 09 dt 07.01.2022Item.no. . 9.14.1.10 - P.no.16 |
| 27 | Provision for Jointing of TW to Rising Main with cost of Material/ specials such as GI Union / CI Flange, GI Reducer UPVC MTA FTA etc. as per requiement of sitei/ccostoflabouretc.completeasperapprovedspecificationandas directed by Engineer in charge USOR 17.19 P 228 |
| 28 | Provision for jointing of Rising main to sump well/OHT and OHT to Distribution pipe line with cost of material/specials such as Bends, MTA as per rerquirement of site i/c cost of labour with excavation, labour as per requirement complete as per approved specification and as directed by Engineer in charge.USOR 17.20 P-229 |
| 29 | Construction of Brick masonry valve chamber with 20 cm thick wall in 1:6 C.M. with12mmthick1:4CementPlasterandbasecourse10cm.thickinM-15. Inside Dimensions 110x80x100cm with - Heavy Duty SFRC chamber cover with framesize130cmx100cmx10cmincludingcostofmaterials,labouretc. complete. USOR 2ndAmendmentOFIssuedvide order no. 254 dt 06.08.2020p-7 |
| 30 | Fillingavailableexcavated earthin trenches, lead up to 50m and lift up to 1.5m in all kind of soil excluding watering and ramming.. USOR.Item.no.16.10 (b)-P.no. 208 |
| 31 | Providing making and testing of Consumer Service Connection (Functional House Hold Tap Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass insert flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE 20mm dia/Gl pipe 15 mm dia (medium class), brass tap with Stainesless steel coating etc. all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), Pre-fabricated cement concrete platform in CC M-20 grade over 75 mm thick M-10 (1:3:6) base and Pre-fabricated Milestone shaped cement concrete stand post as per attached drawing and specifications. Complete item.For connection with 20 mm dia MDPE pipe more than 5 meter & upto 10 meter andCONCRETEROADCROSSINGis necessary. USOR8thAmendmentOFIssuedvide order no. 368 dt 27.01.2023Item.no.17.41.2 -P.no. 1 |
| 32 | Providing making and testing of Consumer Service Connection (Functional House Hold Tap Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass insert flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE 20mm dia/Gl pipe 15 mm dia (medium class), brass tap with Stainesless steel coating etc. all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), Pre-fabricated cement concrete platform in CC M-20 grade over 75 mm thick M-10 (1:3:6) base and Pre-fabricated Milestone shaped cement concrete stand post as per attached drawing and specifications. Complete item., For connection with 20 mm dia MDPE pipe upto 5 meter and road crossingis notrequired. (Distribution pipe lineisonthesamesideofhouse). USOR8thAmendmentOFIssuedvide order no. 368 dt 27.01.2023Item.no.17.41.3 -P.no. 1 |
| 33 | Providing making and testing of Consumer Service Connection (Functional House Hold Tap Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass insert flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE 20mm dia/Gl pipe 15 mm dia (medium class), brass tap with Stainesless steel coating etc. all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), Pre-fabricated cement concrete platform in CC M-20 grade over 75 mm thick M-10 (1:3:6) base and Pre-fabricated Milestone shaped cement concrete stand post as per attached drawing and specifications. Complete item. Forconnectionwith20mmdiaMDPEpipeupto5meterandroad(OTHER THANCONCRETEROAD)crossingis necessary. USOR8thAmendmentOFIssuedvide order no. 368 dt 27.01.2023Item.no.17.41.4 -P.no. 1 |
| 34 | Providing making and testing of Consumer Service Connection (Functional House Hold Tap Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass insert flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE 20mm dia/Gl pipe 15 mm dia (medium class), brass tap with Stainesless steel coating etc. all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), Pre-fabricated cement concrete platform in CC M-20 grade over 75 mm thick M-10 (1:3:6) base and Pre-fabricated Milestone shaped cement concrete stand post as per attached drawing and specifications.For connection with 20 mm dia MDPE pipe more than 5 meter & upto 10 meter androad(OTHERTHANCONCRETEROAD) crossingis necessary. USOR8thAmendmentOFIssuedvide order no. 368 dt 27.01.2023Item.no.17.41.5 -P.no. 2 |
| 35 | Design, drawing, construction, testing and commissioning of GSR/Sumpwell of following capacities with all necessary fitting and accessories as mentioned in therelevantchapter of USOR, IScodes anddepartmental circulars.Complete turn key job for following capacities :- 20 Kilo Litres USOR 2nd ADDENDUMOF Issued vide order no. 254 dt 06.08.2020USOR 26.2 P 17 |
| 36 | capacities :-30 kl |
| 37 | DesignandConstructionofRCCframedbrickmasonrypumphouseoverthe sumpwithallnecessaryfittingandrequirementasmentionedinrelevant chapter of USOR, IS codes and departmental guidelines. Complete turn key job. This item will only be used with item no 26.2 only in cases where pumphouse to beconstructedabovetheproposedsumpwell. USOR2ndADDENDUM OF Issued vide order no. 254 dt 06.08.2020 USOR 26.3 P 18 |
| 38 | Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth,leadupto50mandliftupto1.5m,disposedearthtobelevelledand neatly dressed. (No extra lift is payable if work is done by mechanical means) - All kinds of soil.MPPWD SOR Item 2.6 page 13 |
| 39 | Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm onplan)includingdressingofsidesandrammingofbottomdisposalof excavatedearth,leadupto50mandliftupto1.5m,disposedearthtobe levelled and neatly dressed. - Ordinary rock MPPWD SOR Item 2.7.1 page 13 |
| 40 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing inpositionandbindingincludingcostofbindingwireuptofloortwolevel including all wastage etc. complete. Thermo-Mechanically Treated bars.(TMT) MPPWD SOR Item 5.16.6 page 79 |
| 41 | Reinforcedcementconcretework(with20mmnominalsizegradedstone aggregate)inwalls(anythickness),includingattachedpilasters,buttresses, plinthandstringcourses,fillets,columns,pillars,postsandstrutsetc.above plinthlevelanduptofloortwolevelexcludingcostofcentering,shuttering, finishing and reinforcement : M 20 -Grade ConcreteMPPWD SOR Item 5.2.1 page 75 |
| 42 | Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters butteresses,plinth beams and string courses etc.up to plinth level. MPPWD SOR Item 5.9 page 76 |
| 43 | Lintels, beams, girders, bressumers and cantilevers. - Coping sides MPPWD SOR Item 5.9.5 page 77 |
| 44 | Foundations, footings, bases of columns, etc. for concrete up to plinth level.MPPWD SOR Item 5.9.1 page 76 |
| 45 | Columns, Pillars, Piers, Abutments, Posts and Struts. MPPWD SOR Item 5.9.6 page 77 |
| 46 | Providingand layingin position cementconcrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel :With 20mm nominal size graded stone aggregate.Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate (M 10) MPPWD SOR Item 4.1.1.4 page 38 |
| 47 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters,columns, pillars, posts, struts, buttresses, stringorlacingcourses,parapets,coping,bedblocks,anchorblocks,plain windowsills, filletsetc.up to floor two level, excluding thecost ofcentering, shuttering and finishing : With 20mm nominal sizegraded stoneaggregate.M 20 - Grade concrete - Coping MPPWD SOR Item 4.2.1.2 page 39 |
| 48 | Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg / cm2 and water absorpt ion not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete.Cement Mortar 1:6 (1 cement : 6 sand)MPPWD SOR Item 6.6.2 page 109 |
| 49 | 12mmcementplasterofmix:1:6(1cement:6sand)MPPWDSORItem13.1.2 page 397 |
| 50 | FinishingwallsbyanymechanicalormanualmeanswithAcrylicSmooth exteriorpaint(EconomyExterior)ofrequiredshadeincludingallscaffolding. New work ( Two or more coat applied @ 1.67 ltr/10 sqm over and including one coatundilutedexterior [email protected] litre/10 sqm withcrack bridging ability of upto 0.5 mm on horizontal surfaces with an elongation of 150%andwaterproofingofupto3barsonverticalsurface.MPPWDSORItem13.52 page 405 |
| 51 | Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches,plinth,sidesoffoundationsetc.inlayersnotexceeding20cmin depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. MPPWD SOR Item 2.25 page 18 |
| 52 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete.MPPWD SOR Item 10.2 page 278 |
| 53 | Paintingwithsyntheticenamelpaintofapprovedbrandandmanufactureof required colour to give an even shade:Two or more coats on new work over an undercoatofsuitableshadewithordinarypaintofapprovedbrandand manufacture. MPPWD SOR Item 13.69.1 page 408 |
| 54 | Providingand layingfactorymademachinepressedprecastcementconcrete interlocking paver block of any shape and size conforming to IS:15658- 2006 and ISI marked of 60 mm thickness, M-30 grade with grey cement and pigment all as specified. Made by block making machine with strong vibratory compaction, laid in required colour and pattern over and including 50mm thick compacted bedofstonedust,fillingthejointswithsandetc.allcompleteasperthe direction of Engineer-in-Charge. . MP PWD SOR No. 11.66 P. NO. 325 |
| 55 | Supplying & InstallationofFive star BEE ratingISI Markedrequiredcapacity ofThreephase,50Hz, 415V,OpenwellSubmersiblepump,withControl PanelStarterwithDryRunProtection,singlephase preventer, connections, etc. as required as per specifications but excluding pipe andconnectioncable.3.0H.P.Headmt.15-24DischargeLPM615-195 USOR.Item.no. 24.20.113 P.no.268 |
| 56 | ProvidingandjointingoffollowinggalvanizedIron(MS)Pipesclassmedium with heavy duty seamless sockets for lowering of submersible pumps including testing of joints, cost of pipes & heavy dutysockets andjointing materialsall complete.PipesandsocketsconfirmingtoIS:1239-2011Part-II.50mmdia Class Medium ,USOR 6th &7th AmendmentOFIssuedvide order no. 09 dt 07.01.2022Item.no. 17.8.1 -P.no.32 |
| 57 | Supply & erection of readymade mini pump house (control panel box) GI sheet of 18 gauge of size 90cmx90cm x60cm with 40x40x5mm angle Iron frame to fix it 200mm below ground level with hold fasts grouted in foundation and 300mm above ground level for clearance suitable for fixing of control panel, fuse unit, main switch etc. as per approved specification.USOR item 17.18, P - 227 |
| 58 | 11 KV line on 140 kg. 8.0 Mtrs. long PCC Poles with rabbit conductor average span of 70 mtr. in rural area including labour complete. (Schedule Ref. C-1.2 of MPMKVVCL for SOR 2019-20) |
| 59 | 11KVD.P.Structureson140kg.8.0mtr.longPCCpolesfortappingDP includinglabour complete.(ScheduleRef.C-5.2 ofMPMKVVCL forSOR 2019-20) |
| 60 | 11KVD.P.Structureson140kg.8.0mtr.longPCCpolesforstraightline includinglabour complete.(ScheduleRef.C-5.1 ofMPMKVVCL forSOR 2019-20) |
| 61 | L.T. Line 1 phase 3 wire on PCC support using Aerail Bunched XLPE cable with maximum span of 50 Meter including labour complete. 2 x 35+ 1 x 16 sq. mm (Insulatednuetralmassenger)(ScheduleRef.D-3.2ofMPMKVVCLforSOR 2019-20) |
| 62 | 11/0.4KVout-doortypetransformersub-station. 25KVAon140kg.8.0 meter long PCC Pole including labour complete.(Schedule Ref. E-1.1 of MPMKVVCL for SOR 2019-20) |
| 63 | Earth work in excavation by mechanical means (Hydraulic exavator)/manual means over areas (exceeding 30 cmin depth,1.5 m in width as well as 10 sqm on plan) i/c disposal of exacavated earth,lead upto 50 m & lift upto 1.5 m ,disposed earth to be leveled & neatly dressed.Soft rock with or without blasting or bituminous pavement/cement concrete road. (C) Hard rock requiring chiseling / where blasting is prohibited.PHE SOR16.6 (c) P- 208 |
| 64 | Supplying and installation of energy efficient 5 star rated BEE rating ISI marked required capacity three phase centrifugal mono block inline booster pump set excluding cable. 15-20 M head and 350 LPM TO 270 LPM.2 H.P.phe usor 2nd AmendmentOFIssuedvide order no. 254dt 06.08.2020Item.no.17.37.3 -P.no.3 |
| 65 | Supplying & Installation of Five star BEE rating ISI Marked required capacity of Three phase, 50 Hz, 415V, Open well Submersible pump, with Control Panel Starter with Dry Run Protection, single phase preventer, connections, etc. as required as per specifications but excluding pipe and connection cable.5.0 H.P. Head Mt.15-24,Discharge LPM 930-420 .PHE USOR24.20.113 (ii)P- 268 |
| 66 | Providing and fixing following check (non-return) valves Class-I, confirming to IS-778/1984 (Reaffirmed 2005) female ends, tested to 21.09 kg/sq.cmt.50 mm dia flange .PHE SOR16.8P- 86 |
| 67 | Supply & Filling moorum for pipe bedding or over the pipe ( including supply of moorum ) .PHE SOR16.11 (a)P- 208 |
| 68 | Design, drawing, construction, testing and commissioning of Elevated Service Reservoir/ Over Head Tank (ESR/OHT) with all necessary fitting as mentioned in relevant chapter of USOR, IS codes and departmental guidelines. Complete turn key job for following capacities with 9/12/15 meter staging height from GL 125kl/15 mtr .PHE SOR phe usor 2nd AmendmentOFIssuedvide order no. 254 dt 06.08.2020 |
| 69 | Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete.ElectroFusionCoupler160mm,USOR 6th AmendmentOFIssuedvide order no. 09 dt07.01.2022Item.no.9.14.1.12 -P.no. 17 |
| 70 | Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site,transit insurance, loading, unloading, stacking etc. complete.Electro Fusion Equal Tee.USOR.6th AmendmentOFIssuedvide order no. 09 dt07.01.2022Item.no.9.14.2.9 -P.no. 17110 mm dia HDPE |
| 71 | Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, inpressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site,transit insurance, loading, unloading, stacking etc. complete. USOR. 6th AmendmentOFIssuedvide order no. 09 dt07.01.2022Item.no.9.14.2.8 -P.no. 17,Electro Fusion Equal Tee90 mm dia HDPE |
| 72 | Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, inpressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. Electro Fusion Reducer USOR. 6th AmendmentOFIssuedvide order no. 09 dt07.01.2022Item.no.9.14..4.13 -P.no. 18, 110 x 90 mm dia |
| 73 | Steel work in welded built-up section/ framed work,including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar,ladder , railings, brackets, gates and similar works PHE SOR 16.25 (d) IIP= 211-212 |
| 74 | Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete.Hard muram MPPWD SOR item 2.27.1 p-19 |
| 75 | Providing and fixing G.l chain link fabric fencing of required width in mesh size 25 x 25 mm made of G.l wire of dia. 3 mm including strengthening with 2 mm dia. Wire or nuts, bolts and washer as required complete with posts of angle iron size 50x50x5mm 2.5 meter apart and strut of required size including bottom to be split and band at right angle in opposite direction for l0 cm length and drilling holes upto l0 mm dia and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix l:2:4 (l cement:2 sand :4) graded stone aggregate 40 mm nominal size) every l5s post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineering charge.PHE USORII amnd. 17.35 P- 3 Issued vide order no. 254 dt 06.08.2020 |
| 76 | Fabrication, Providing and fixing of typical information board of size 1.50mX0.90m made out as detailed belowl. Tow vertical support (post) made out from ISA angle 50.X50X6mm this shall be minimum 0.75m below GL and 2.25m above GL. The vertical post shall be erracted on 450mmX450mmXl000mm foundation blocks (250mm above GL and 750mm below GL) made of cement concrete 1:2:4.2. The board shall be fabricated from l.6mm thick MS sheet of size 1.50mX0.90m, The frame of board shall be fabricated with angle ISA 40X40X6 cross member support from\"behind and flat 20X5mm support all around board.3. Whole structure shall be painted by standard color with lettering, border, heading, and logo etc using synthetic enamel paint of superior quality including supply, welding, excavation, concreting, painting of base, border and lettering, painting andother required details etc complete as directed by Engineer in chargeUSOR. 6th AmendmentOFIssuedvide order no. 09 dt07.01.2022Item.no.17.48 -P.no. 32 |
| 77 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work ( two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10sqm)PHE SOR 16.42 (1) P- 216 |
| 78 | Providing, fixing including testing following double flanged cast iron (horizontal cast) pipe per IS : 7181 of 2.75 M length 100 mm dia PHE SOR 3.5 P- 34 |
| 79 | Providing, fixing including testing following double flanged cast iron (horizontal cast) pipe per IS : 7181 of 2.75 M length 150 mm dia PHE SOR 3.5 P- 34 |
| 80 | Providing & fixing of following Cast iron double flanged sluice valves as per I.S.:14846- 2000 fitted with cast iron cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete 80 mm dia PN 1.6PHE SOR 8.1 P- 111 |
| 81 | Providing & fixing of following Cast iron double flanged sluice valves as per I.S.:14846- 2000 fitted with cast iron cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete100 mm dia PN1.6 PHE SOR 8.1 P- 111 |
| 82 | Providing & fixing of following Cast iron double flanged sluice valves as per I.S.:14846- 2000 fitted with cast iron cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete150 mm dia PN1.6 PHE SOR 8.1 P- 111 |
| 83 | Construction of Brick masonary valve chamber with 20 cm thick wall in 1:6 C.M. with 12mm thick 1:4 Cement Plaster and base course 10 cm. thick in M-15. Inside Dimensions 110x80x100cm M-20 RCC chamber cover size 130x100cmx120cm including cost of materials, labour etc. complete. PHE SOR 16.45 P- 217 |
| 84 | Providing and laying in position including testing following cast iron double flanged 90° Duck Foot Bend. Heavy Class 100 MM diaPHE SOR 3.14 P- 38 |
| 85 | Providing and laying in position including testing following cast iron double flanged 90° Duck Foot Bend. Heavy Class 150 MM diaPHE SOR 3.14 P- 38 |
| 86 | Providing laying and jointing of following galvanized Iron (MS) Pipes with specials (such as bends, elbows, tees etc) class light, medium & heavy including testing of joints, cost of pipes, specials and jointing materials all complete. Pipes and sockets conforming to IS1239/2011 Part-II 20 mm dia mediumPHE SOR 6.1 P- 86 |
| 87 | Providing for Lightning Conductor |
| 88 | Providing Water level Indicator |
| 89 | Aluminium Ladder |
| 90 | Providing and laying of 80 mm thick factory made cement concrete interlocking paver block of M-30 grade |
| 91 | Water Profing treatment over roof wall chhaja balcony |
