|
| 1 | 1_Improvementof Road from Jatiya Vidyalaya to Dakshin Rehabari and Pamelichupaapproaches_Clearing and grubbing of road land including up rooting rank vegetation grass,bush, shurbs saplings and trees of girth upto 300mm removal of stumps of trees cut earlier and disposal of unseviceable materials & stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal & disposal of top organic soil not exceeding 150mm in thickness.(I) By manual Means- (a) In area of non thorny jungle |
| 2 | Construction of embankment with material obtained from borrow pits,Construction of embankment with approved materials obtained from borrow pits with a lift up to 1.5m, transporating to site, spreading, grading to required slope and compacting to meet required of Tables 300.1 and 300.2 with a lead upto 1000m as per technical specification clause 301.5. |
| 3 | Construction of subgrade and earthen shoulderwith approved meterial obtained from borrow oit with all lift and leads , transporting to site ,soreading gradding to required slope and compacted to meet requirement of table 300-2 including cost of testing of materials at site and laboratory as directed by the deptt. |
| 4 | By Mix in place Methd(Construction of granular sub-base by providing close graded material,spreading in uniform layers with motor grader on prepared surface,mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achive the desired density coplete as per cl.401 (with an initial lead of 5.00Km) (including cost of testing of materials at site and labortory as directed by deptt.) |
| 5 | Providing,laying,spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness,hand packing,rolling with vibratory roller 8-10 tonnes capacity in stages to proper grade and camber,applying and brooming requisite type of screeninig/binding material to fillup the interstices of coarse aggregate, watering and compacting to reqd. density(with an initial lead of 5.00km) By mechanical means Grading-III(Using Screening type-B)(11.2mm aggregates) |
| 6 | Providingand laying interlocking concrete block pavement (M40) having thickness 80mm as per echnical specification clause 1504 including carriage.(a) including Edge block/Edge restraints |
| 7 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75mmx 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450mm x 450mm x 600 mm bellow ground level as per drawing and technical specefication(V) 800 mm x 600 mmrectangular |
| 8 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75mmx 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450mm x 450mm x 600 mm bellow ground level as per drawing and technical specefication(iii) 60cm circular |
| 9 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75mmx 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450mm x 450mm x 600 mm bellow ground level as per drawing and technical specefication(ii) 60cm equilateral traingle |
| 10 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges.The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level.The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube.All M.S. will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 |
| 11 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications |
| 12 | 600mm Single Row HPC CulvertEarth work in excavation for foundation of structure upto 3.00 m depth as per drawing and Technical Specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of side slopes and bottom and backfilling with approved material |
| 13 | Providing cement concretefor plain/ RCC in open foundation complete as per drawing and Technical Specifications Clause 802, 803,1202 &1203 crushed stone . PCC grade M10 Nominal Mix 1:3:6. |
| 14 | Providing and laying RCC pipe(NP3) for culvert on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection work, backfilling, concrete and masonry workin head wall and parapets Clause 1106 600mm dia |
| 15 | Brick masonry work in cement mortar in foundation of head walls complete excluding pointing and plastering as per drawing and technical specification Clause 1109 (iii)in prop.1:4 |
| 16 | Plastering with cement mortar 1:4, 15 mm thick on brick work in sub-structure as perTechnical specification Clause 613.3 |
| 17 | 2_ImprovementofRoad from Ext. OBK Road to Doloigaon (Kuwara)_Clearing and grubbing of road land including up rooting rank vegetation grass,bush, shurbs saplings and trees of girth upto 300mm removal of stumps of trees cut earlier and disposal of unseviceable materials & stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal & disposal of top organic soil not exceeding 150mm in thickness.(I) By manual Means- (a) In area of non thorny jungle |
| 18 | Construction of embankment with material obtained from borrow pits,Construction of embankment with approved materials obtained from borrow pits with a lift up to 1.5m, transporating to site, spreading, grading to required slope and compacting to meet required of Tables 300.1 and 300.2 with a lead upto 1000m as per technical specification clause 301.5. |
| 19 | Construction of subgrade and earthen shoulderwith approved meterial obtained from borrow oit with all lift and leads , transporting to site ,soreading gradding to required slope and compacted to meet requirement of table 300-2 including cost of testing of materials at site and laboratory as directed by the deptt. |
| 20 | By Mix in place Methd(Construction of granular sub-base by providing close graded material,spreading in uniform layers with motor grader on prepared surface,mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achive the desired density coplete as per cl.401 (with an initial lead of 5.00Km) (including cost of testing of materials at site and labortory as directed by deptt.) |
| 21 | Providing,laying,spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness,hand packing,rolling with vibratory roller 8-10 tonnes capacity in stages to proper grade and camber,applying and brooming requisite type of screeninig/binding material to fillup the interstices of coarse aggregate, watering and compacting to reqd. density(with an initial lead of 5.00km) By mechanical means Grading-III(Using Screening type-B)(11.2mm aggregates) |
| 22 | Providingand laying interlocking concrete block pavement (M40) having thickness 80mm as per echnical specification clause 1504 including carriage.(a) including Edge block/Edge restraints |
| 23 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75mmx 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450mm x 450mm x 600 mm bellow ground level as per drawing and technical specefication(V) 800 mm x 600 mmrectangular |
| 24 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75mmx 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450mm x 450mm x 600 mm bellow ground level as per drawing and technical specefication (iii) 60cm circular |
| 25 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75mmx 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450mm x 450mm x 600 mm bellow ground level as per drawing and technical specefication (ii) 60cm equilateral traingle |
| 26 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges.The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level.The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube.All M.S. will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 |
| 27 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications(80% of the length is considered) |
| 28 | Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H’sfixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance. |
| 29 | 600 mm Dia HPCEarth work in excavation of foundation of structure as per drawing and technical specification clause 1104, including setting out, construction of shoring and bracing , removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material..(I)Ordinary soil(A) Upto 3m depth |
| 30 | Providing cement concrete for plain/RCC in open foundation complete as per drawing and Technical specificationsClauses 802, 803, 1202 &1203 crushed stone. PCC grade M10 NominalMix 1:3:6 |
| 31 | Providing and laying Reinforced Cement Concrete Pipe NP3 for culverts on 1st class bedding of Geanular Maerial /cc M15 in Single row including fixing collar with cement morter 1:2 and cost of granular bedding but excluding excavation, protection works, back filling concrete and massonary works in head walls and parapets Clause 1106.600 mm dia HPC |
| 32 | Brick masonry work in cement morter in foundation of head walls complete excluding pointing and plastering as per drawing and technical specification clause 1109 in Prop 1:4 |
| 33 | Plastering and cement morter 1:4,15 mm thick on brick work in Sub-Structure as per Technical specification Clause 613.3 |
