Tender For Beautification Work Of Vishnoi Park Located In Geeta Nagar Scheme. - Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 60 metres lead.(dsr706) 4 12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand) qty same as Item no 1(13.4.1) 5 Scrapping old white or colour wash including disposal of refuse up to 60 mt. all complete. 6 Providing and applying white cement based putty of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 7 Finishing walls with Premium Acrylic Smooth exterior paint(apex) with Silicone additives of required shade : New work (Two or more coats applied ) (dsr new sl no 34 2023-24) 8 Painting and varnishing with two coat of approved quality paint all complete (grill) 9 PART-B (CivilWork) 10 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out theAll kinds of soil. 11 Providing and laying in cement concrete in 8:4:1 ( stone ballast 8 (40 mm nominal size) : 4 approved coarse sand : 1 cement and curing complete, including cost of formwork in foundation and floors. (PWD SOR 2023-24 SI.No-1/4.1.8) Ch-5 12 RCC work with cement approved coarse sand and 2cm (3/4)gauge approved stone ballast in the proportion 1:1½:3 (1 cement : 4½ aggregates)including necessary centering & shuttering excluding supply of reinforcement and its bending the same with 24 BWG GI binding wire and necessary centering & shuttering excluding supply of reinforcement and complete. RAFT 13 COLUMN 4.2.2 14 Beam 5.1.2 15 SLAB 4.2.2 16 Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-5000 or more. 5.22.6 17 Centering and shuttering including strutting, propping etc. and removal of foundation footing base of columnetc for mass concrete, wall (any thickness) including attached pilasters, butteresses,plinth and string course etc, Suspended floors, roofs,landing,balconies and access platform.RAFT 18 COLUMN 4.3.1 19 BEAM 4.3.3 20 SLAB 4.3.2 21 Class-150 brick work 1:4 (1 cement: 4 coarse sand) in Foundation & Plinth including supply of all material, labour, T&P etc. required for proper completion of work. 22 Brick work with common burnt clay (non modular) bricks of class-150 In superstructure above plinth level up to floor V level in all shapes and sizes Cement mortar 1:4 (1 cement: 4 coarse sand). 23 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) 24 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 (1 cement: 4 coarse sand) 25 Providing and applying white cement based putty of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 26 Finishing walls with Premium Acrylic Smooth exterior paint(apex) with Silicone additives of required shade : New work (Two or more coats applied ) ( 27 Painting and varnishing with two coat of approved quality paint all complete (grill) 28 Providing and laying water treatment on roofs of slabs by applying cement slurry mixed with water proofing cemenwt compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.(d)fourth and final layer of brick tiling with cement mortar (which will be paid for separately.For the purpose of measurement the entire treated surface will be measured. 29 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of requiredsize, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shadeArea of slab over 0.50 sqmCH-14SOR. 23-24(SI No.18/11.23) 30 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.PWD SOR. 23-24(SI No.10/8.31) CH-18 31 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc. complete.PWD 23-24 (SI No.10/11.38) CH-14 32 Providing and laying Vitrified tiles in different sizes (thickness to bespecified by manufacturer), with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.CH-14 SOR 23-24 (SI No. 14) 33 Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.CH-10 SOR 23-24 (SI No. 27) 34 Supply and fixing of 35 mm thick commercial quality plywood flush door shutter conforming to IS 2202 part-1 (1983) including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges bolts nuts handles springs and other fitting with necessary screws etc all complete.CH-10 SOR 23-24 (SI No. 27) 35 16mm sliding bolt 10 36 tower bolt 6 37 Handle 6 38 Providing and fixing factory made wpc door frame made of PVC extruded sections of size 77 mm x 58 mm including supply including supply of all material labour T&P etc. required forproper completion. 39 Providing and fixing 37 mm thick factory made wpc Door shutter. Styles and rails made of PVC hollow extruded printed(Door Shutter) including supply including supply of all material labour T&P etc. 40 Supply and fixing of hexagonal fan box with hexagonal side of approximate 80mm in length fabrication from 16 SWG M.S sheet in corporate 10mm sheet in corporate 10mm and M.S round bar dully bent for supporting fan hanger etc all complete. SI No 1149/elctrical PSR 41 Providing and fixing PVC spout pipe 50 mm dia and 40 Cm Length 26 including supply of all materail, labour, T&P etc completion of the work as per direction of E/I. (A/R) PSR 42 Dismantalling of Floor including disposa of refuse up to 60 mt. all complete.CH-17 SOR. 23-24 (SI No.698) 43 Supply and fixing chequered pcc tiles 22 m thick in footpath and courtyard jointed with neat cement slurry mixed with pigment matching the shade of tile including rubbing and cleaning on 20 mm thick bed of cement mortar 1:4 (1cement:4coarse sand) 44 40 mm thick Cement concrete flooring 1:2:4 (1cement : 2coarse sand : 4graded stone aggregate of size 20 mm nominal size )laide in one layer , finished with floating coat of neat cement.including fixing of glass strips. (excluding cost of glass strips ). 45 Chlorinated Polyvinyl Chloride (CPVC) pipes.having thermal stability for hot & 15 mm nominal outer dia Pipes (DSR No 18.8.1) 82 46 Same as above item but for 20 mm CPVC Pipe (DSR-18.8.2) 47 Same as above item but for 25 mm CPVC Pipe (DSR-18.8.3) 48 Supply and fixing of PVC SWR ring fit (as per IS 13592 with latest 84amedments) type-A) phenolex prince suprime make soil waste and vent pipe dia 110 mm (OD) 49 Supply and fixing of SWR phenolex prince suprime make nahani trap 85 100 mm x 75 mm embeded in cement concrete 1:2:5 50 Supply and fixing of ISI mark parrywater/ Jonshon / Cerra makeOrrisa pattern WC pan size 580 mm of approved quality including 10 litcapacity low level PVC Cistern with all accessories. The rate is inclusive of supply and fixing of WC pan-1 no, low level cistern PVC 10 lit capacity-1 No, SWR P-trap-1 No, Flush pipe 30 mm dia PVC (of approved make- 1 PVC connection of heavy duty (appropriatelength) and fixing is to done in cement concrete 1:2:4 (1 cement, 2 coarse sand 4 stone grit 20 mm size) along with all other consumables necessary for fixing etc. complete required for proper completion of the work as per direction. of E/I. AR AS PER DSR 17.1 51 P/F of Flat back or angular front lipper urinal basin of white glazed earthen ware 465x355x265 mmCH-22 SOR 23-24(SI No.12) +10% C.P. 52 Providing and fixing of CP BRASS jali 100 mm dia as per directions of 87 EЛ(A/R) incuding of all material, labour and T&P etc. required for proper completion of the work. 53 Supplying and fixing of 20 mm dia Heavy Duty Gate Valve 1.S.I. marked as per directions of E/AR AS PER DSR 18.18.2 54 Supplying and fixing of CP Brass Bib Cock (15 mm dia) Heavy Duty Long body of approved make as per directions of EЛ(A/R) incuding of all material, labour and T&P etc. required for proper completion of the work.AR AS PER DSR 18.49.1 55 Supplying and fixing of CP Brass Bib Cock (15 mm dia) Heavy Duty short body of approved make as per directions of E/l. DSR-18.15.1 810 incuding of all material, labour and T&P etc. required for proper completion of the work. AR AS PER DSR-18.53.1 56 Supplying and fixing of CP angle valve (15mm dia) heavy duty of approved make as per directions of E/I.AR AS PER DSR-18.53.1 57 Making House connecting chamber size 600mm x600mm x600 mm with class 150 B/W in 1:4 cement and coarse sandmorter base concrete 1:5:10 PSR 58 Construction of chamber of Internal size 046mx0 45x0.45m with class 150 B/W in 1:4 cement and coarse sand morter base concrete 1:5:10 (1 cement: 5 coarse sand: 10 Brick ballast 40 mm size) 12mm thick plaster in 14 cement and coarse sand morter with neat finished and 8cm thick PCC 124 (1 cement 2 coarse sand 4 stone grit 20 mm size in floor and cunet including RCC. Cover with 8.0cm thick including cost of all material, labour T&P etc required for proper completion of the work (A/R) 59 Providing and fixing wash basin with C.I brackets, 15 mm C.P. brass pillar taps. 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making goodthe walls wherever require White Vitreous China Flat back wash basin size 450x 300 mm with single 15 mm C.P. brass pillar tap incuding of all material, labour and T&P elc. required for proper completion of the work. AR AS PER DSR 17.7.7 60 Electrification 61 Wiring point for light with 1.5 sqmm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 1.5 sqmm FRLSH PVCinsulted multistrand copper conductor cable as earth wire piano type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite sheet etc complete in all respect as directed including matching colour wsh (SOR 2018 E/M) 62 Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand in PVC conduit pipe partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 sqmm FRLSh PVC insulated multistrand copper conductor cable as earthwire, piano type switch& ceilingrose on 3 mm. thick backelite sheet etc., complete in allrespect includingmatchingcolour wash.(SOR 2018 E/M) 63 Wiring point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrandsinglecore copper conductor cable in PVC conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting.complete with 14 SWG copper earth continuity wire and piano type switch and socket etc., complete in all respect including matching colour wash.(SOR 2018 E/M) 64 Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universalsocket in suitable M.S. box of175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. (SOR 2018 E/M) 65 Add for light/fan point with modular type switch in place of piano type switch (SOR 2018 E/M) 66 Supply & wiring of submain with two no 4.0sqmm FRLSH PVC insulated 1100v grade multistrand single core copper conduter cable in wall and partyly laid in slab alongwith. (SOR 2018 E/M) 67 Add for plug point with modular type switch and socket in place of piano type switch an socket. (SOR 2018 E/M) 68 Fan box cover of 3mm thick bakelight sheet of hexagonal/round shape on existing fan box complete in all respect direction of E/I MR.(SOR 2018 E/M) 69 Supply and laying of 50sqmm 3.5 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. One surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be aproperly connected with the earth conductor by lamps etc. (SOR 2018 E/M) 70 S/F round bakelight All/PVC Junction Box cover on exsiting Junction Box complete in all respect as per direction of E/I M/R 71 Add for power plug point with modular type switch and socket in place of piano type switch an socket (SOR 2018 E/M 72 Supply and wiring of submain with two number 2.5 sqmm FRLSh PVC insulated 1100 v grade multistrand single core copper conductor cable in 20 mm dia heavy guage (2 mm thick) PVC conduit partly concealed in wall and partly laid in slab along ith reinforcement before concreating, with one no. 1.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit including matching colour wash etc. complete in all respect. (SOR 2018 E/M) 73 Providing & Fixing of fountain. PSR
