|
| 1 | Material and labour for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exceeding 400 Sqm and depth exc 50mm and n.exc 100 mmand removing materials from site of work or stacking for reuse at site complete all as specified and directed. |
| 2 | Material and labour for 75 mm thick WBM (compacted thickness) with broken metal of granite, trap or basalt stone of grading 2 (63mm to 40mm) or grading 3 (50 to 20mm size) spread, rolled with 8 to 12 tonne power roller and consolidated to required camber and gradient complete all as specified and as directed. |
| 3 | Material and labour for preparing WBM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/ tack coat with bituminous primer @ 10 Kg per 10Sqm using paving bitumen grade VG-10 complete all as specified and as directed. |
| 4 | Material and labour for applying evenly a priming/ tack coat with bituminous primer @ 2.5 Kg per 10Sqm using paving bitumen grade VG-10 complete all as specified and as directed. |
| 5 | Material and labour for premix bituminous macadam (using paving bitumen VG-20)laid / rolled and compacted to required gradient and camber (consolidated thickness 75mm or less), rolled with 8 to 12 tonne power roller complete all as specified and as directed.Note :-Binder content, paving bitumen VG-20 shall be @ 4% by weight of total mix. All materials are prepared by hot mix plant. |
| 6 | Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/ tack coat with bituminous primer @ 5 Kg per 10Sqm using paving bitumen grade VG-10 complete all as specified and as directed. |
| 7 | Material and labour forapplying premixedbituminous carpet, 40mm consolidated thickness with 0.54 Cum of stone chippings mixed with 29.2 Kg of binder (using paving bitumen VG-20), rolled with power roller 8 to 12 tonne to required camber and gradient complete all as specified and directed. |
| 8 | Material and labour for liquid seal coat applying evenly binder @ 9.80Kg per 10 Sqmusing paving bitumen of grade VG-20 blinding with 6.3mm size stone chippings @ 0.09 Cum per 10Sqm and rolled to required camber and gradient with power roller8 to 12 tonne complete all as specified and directed. |
| 9 | Material & labour for repairs to potholes of depth n.exc 30mm and area not exc 1 Sqm each including sweeping free from dust and mud, or water, scouring sunken surfaces in roads, paths, etc. cutting around edges to at least 30mm in depth, making good by applying tack coat with bitumen grade VG-10 @ 5 Kg per 10Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder @ 9.8 kg per 10 sqm (using paving bitumen, grade VG-20), blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), rolled with power roller 8 to 10tonne and compacted to required camber and gradient and finishes to a uniform and smooth surfaces complete all as specified and directed. |
| 10 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed. |
| 11 | Material and labour for lime stonefor kerbs of roughly squared stones of size 15cm x 30cm dressed, so that the maximum depression from straightedges held against the dressed surface shall not exceed 6 mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in CM 1:6 and struck flush complete all as specified and directed. |
| 12 | Material and labour for painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with one coat of road marking paint, white or golden yellow all as specified and directed. |
| 13 | Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 14 | Supply and fixing in repair of cat eye reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector fixed with and including aluminium studs of suitable size as per manufactures instructions complete all as specified and directed. |
| 15 | Supply & Fixing Convex Mirror outdoor typemade with Poly carbonate material mounted on 80mm dia MS pipe post duly powder coated of 2450mm length, clear and define mirror images having 130 degree of veiwing angle, unbreakable and stronger glass size of 800 mm dia and including embedding below GL in PCC M-15 (Nominal mix) type B-1 using 20mm graded crushed stone agreegatesin foundation of size 300mmx300mmx450mm, necessary excavation including taking down of existing US mirror with PCC bed blockcomplete all as specified and as directed. |
| 16 | S & F in repairs Solar Road Studs [Bi-Directional] made of Aluminium Die cast matt finish of size 125 X 125 X 25mm [Approximately], working on High Efficiency Mono-Crystalline Solar Panel 2.4 V / 0.3 Watt, One Ni-Mh or NI-cd Rechargeable Battery [1.2V / 1600 MA] with Six Super Bright LEDs with 10,000 to 18,000 mcd [Millicandela], with a minimum Operating time of 3-4 consecutive days with full charge, viewing distance / visibility not less than 800m with 2 Hz Flash Rate, Self operated from Dusk to Dawn, anti twist ribs on the bottom anchor / shank with high intensity reflective grade polymer sticker and conforming to IS - 12063, of Colour yellow or red or blue or green or white as approved by AGE (I) complete all as specified and as directed. |
