|
| 1 | Excavating in trenches not exc 1.5 Mtr wide & not exc 1.5 Mtr depth for foundation etc or for shafts, wells, cesspits, manholes etcand getting out Hard/dence soil complete all as specified and directed by Engineer-in-Charge. |
| 2 | Returning, filling in trenches including spreading, levelling, watering and well ramming in layer n. exc 25 mm complete all as specified and directed by Engineer-in-Charge. |
| 3 | Removing Excavated soils not exc 50 Mand depositing where directed at a level not exc1.5 M above the starting point complete all as specified and directed. |
| 4 | Material & labour for PCC 1:4:8 type D-2 (with using 40mm graded stone aggregate)in foundation filling andmass concrete, complete all as specified and directed. |
| 5 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation andplinth beams, and similar work, vertical or to batter for fair finished surfaces complete all as specified and directed. |
| 6 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surface complete all as specified and directed. |
| 7 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished surface complete all as specified and directed. |
| 8 | Material & labour for Fair finished flat Form work to soffits of suspended slabs such as roof slabs, floor slabs and similar worknot exce 200 mm thick complete all as specified and directed. |
| 9 | Fair finished flat Form work to Chajjas, water troughs and similar items including edges complete all as specified and directed. |
| 10 | Material & labour for RCC M25 as in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 11 | Material & labour for RCC M25 as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 12 | Material & labour for RCC M25 as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 13 | Reinforced Cement Concrete Type M-25 (using 20 mm graded granite stone aggregate) for slabs suspended on walls, beams and columns, in floors, roofs, landings and in shelves and the like complete all as specified and directed. |
| 14 | Reinforced Cement Concrete Type M-20 (using 20 mm graded granite stone aggregate) in Chajjas and the like complete all as specified and directed. |
| 15 | Mild steel bars 10mm dia TMT bar and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 16 | Mild steel bars 6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 17 | Moorum/Red bajri filling in floors/pavings, laid in layers not exceeding 15 cm thick in each layer, spread, levelled and rammed/ rolled including watering to required level and gradient complete all as specified and directed. |
| 18 | 75 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed. |
| 19 | Material & labour for 50 mm thick PCC 1:2:4 type B1 (using 20 mm graded granite stone aggregate) in floorings including finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 20 | Material & labour for Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed. |
| 21 | Material & labour forGlazed ceramiccolour tiles of size 300 x 450 x7mm thick in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 complete as specified and directed. |
| 22 | Brick work with sub-class `B\" bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 23 | Material & labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement incl; mixing of water proofing compound complete all as specified and directed. |
| 24 | Material & labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed. |
| 25 | Material & labour for 5mm rendering thick in CM (1:3) on concrete sufaces, finished even & smooth (without using extra cement), complete all as specified and directed. |
| 26 | Supply & fixing for Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. |
| 27 | Material & labour for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate for fixing hold fast, coping, cills and filling in pressed steel door frames including necessary form work and finishing the surfaces to match with existing, complete all as specified and directed. |
| 28 | Material & labour for 2 nd class hard wood factory made 35mm thick plain framed pannelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 29 | Supply and fixing for 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 30 | Supply and fixing for factory solid PVC door frame of size 50mm x 47 mm made out of 5mm wood grain printed PVC sheet reinforced with MS Square tube as per specified & drawing in opening complete all as specified and directed. |
| 31 | Supply and fixing for Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed. |
| 32 | Supply and fixing for MSbutt hinges of 100 mm size cold rolled mild steel medium weight, ISI marked complete all as specified and directed. |
| 33 | Supply and fixing 150mm size Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 34 | Supply and fixing 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 35 | Supply and fixing powder coatedanodised aluminium framefor doors, windows, ventilators with one or more rebates, grillincluding jointing cleat for fixing etc. complete all as specified and directed. Note :- Minimum thickness of powder coating 50 micron complete all as specified and directed. |
| 36 | Supply and fixing aluminium anodised powder coated window and ventilator shutters side hung type or sliding type with orwithout sash barsof aluminium section weighing minimum 0.55 kg/mtr including necessary jointing cleats, glazing clips, ruber neoprene packing , anodised aluminium snap beading , screws including powder coated anodised aluminium fittings such as peg stay 150mm long (1 no ) , hinge type B-21 100mm long (2 nos) suitable handle (2 nos)tower bolt(2 nos) complete all as specified and directed. |
| 37 | Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 38 | Supply & fixing tinted / coulered floated glass ordinaryquality & glazing with wooden/ aluminium bead/oil puttyin Square n.exc 0.5 Sqm in Each panel 4.8 mm thick complete all as per specified and directed. |
| 39 | Supply and fixing 500 ltrrotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position withall as specified in SSR Part Icomplete all as specified and directed. |
| 40 | Supply and fixingBall valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 210 gms) complete screwed for iron pipe or brass ferruleof size 20 mm bore complete all as specified and directed. |
| 41 | Supply and fixing Vitreous china water closet Orissa pattern long pansize 580x440mmwith trap front or back inlet and integral foot rest complete fixedincluding lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe and anti siphon pipe complete all as specified and as directed. |
| 42 | Supply and fixingin repair vitreous china wash down water closet pan (pedestal pattern ) white including plastic water closet set black closed pattern with flat bottom including plastic WC seat & cover and mild steel chromium plated hinging devices complete all as specified and directed. |
| 43 | Supply and fixingin repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm diapipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 44 | Supply and fixing forvitreous china wash basin white flat back size 550x400mm including pedestal excluding taps , waste but including brackets as , complete all as specified and directed. |
| 45 | Supply and fixing in repairs Vitreous China Half stall urinal White complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed. |
| 46 | Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed. |
| 47 | Supply and fixing for 600x450mm beveled edge mirror of selected quality glass mounted on 6mm thick AC building board on commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 48 | Supply and fixingPVC connection 15mm size with PTMT nuts of length 450mm long complete all as specfied and directed. |
| 49 | Supply and fixingBib taps cast copper chromium plated fancy type with crutch or butterfly handle screwedfor iron pipe or for brass ferrule of 15 mm bore diacomplete all as specified and directed. |
| 50 | Supply and fixing in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing tosteel pipe or union complete all as specified and directed. |
| 51 | Supply and fixing in repairs Fancy type chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 52 | Supply and fixing in repairbrass chromium plated tubular towel rail, 20 mm dia., D Type, 45 cm long between flanges, complete all as specified and directed. |
| 53 | Supply and fixingpillar cock, chromium plated, fancy type for iron pipe or for brass ferrule of 15mm bore diacomplete all asspecfied and directed. |
| 54 | Supply and fixing repair in 10 ltr low level PVC value less, syphonic action type flushing cistern,white, with ball value, float and handle including brackets all as specified and directed. |
| 55 | Supply and fixing Angle stop valve cast copper alloy, with fancy type chromium plated capstan head, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete, all as specified. |
| 56 | Supply and fixing 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed complete all as specified and directed. |
| 57 | Supply and fixing soap dish vitreous china white approximate size 160 x 160 x 90 fixed to plug with chromium plated brass screw complete all asspecfied and directed. |
| 58 | Supply and fixing for 32 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgs/cm2 as in waster pipe for WHB and urinal waste pipe complete all as specified and directed. |
| 59 | Material & labour for PVC (SWR)multi floor trap diameter of outlet 75 mm with grating including jointing with solvent cement complete all as specified and directed. |
| 60 | Material & labour for PVC (SWR)floor trap, plain diameter of outlet 75 mm with grating including jointing with solvent cement complete all as specified and directed. |
| 61 | Supply and fixing PVC (SWR) pipes single socketed in any length with rubbering joints fixed to walls 110mm bore complete all as specified and directed. |
| 62 | Supply and fixing PVC (SWR) pipes single socketed in any length with rubbering joints fixed to walls 75 mm bore complete all as specified and directed. |
| 63 | Supply and fixing PVC (SWR) bends any radius 110mm bore with access door complete all as specified and directed. |
| 64 | PVC(SWR) junction single (single \"T\") equal or unequal 110mm bore with access to door ccomplete all as specified and directed. |
| 65 | Supply and fixing PVC (SWR) bends any radius 75 mm bore with access door complete all as specified and directed. |
| 66 | PVC(SWR) junction single (single \"T\") equal or unequal 75 mm bore with access to door ccomplete all as specified and directed. |
| 67 | Supply and fixing Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15 mm, complete all as specified and directed. |
| 68 | Supply and fixing Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20 mm, complete all as specified and directed. |
| 69 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth all as specified and directed by Engr-in-Charge. |
| 70 | Material & labour for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion complete all as specified and directed. |
| 71 | Material & labour for preparation of new plastered surfaces of ceiling including cornices, pilasters etc and applying three coat of white wash complete all as specified and directed. |
| 72 | Preparation of new wooden surfaces of any description,over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed. |
| 73 | Supply and fixing class SN 8 structured wall polyethylene piping system (pipe with online coupler and elastomeric rubber ring) with hollow annular profiled outer surface and a smooth inner surface (double wall corrugated) for non-pressure underground drainage and Sewerage application, Type B, Nominal Size (DN/ID) 150, made of polyethylene (PE) material conforming to per IS16098 (Part 2):2013 and to be transported, handled, installed and jointed as per Annex A of IS16098 (Part 2):2013 complete all as specified and as directed. |
| 74 | Material & labour for 75mm thick cement concrete (1:3:6) type C-2 using 40mm graded stone agg finished even & smooth without using extra cement as in plinth protection/ Hard standig including forming joint to full depth at every 3.0m interval and at every charge of direction and filled mixture of bitumen and sand (1:3) by weight, complete all as specified and directed. |
| 75 | Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in Hard rock, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50m & making good surface complete all as specified and directed. |
| 76 | Plain Cement Concrete Type D2 1:4:8 (using 40 mm gradedstone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 77 | Supply and fixing MS steel work in tubular trusses and tubular posts including special shaped washersetc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 withone shop coat of zinc chromate primer paint complete all as specified and directed. |
| 78 | Supply and fixing 1.60 mm thick Mild Steel Plain, black sheet in Chullah hood, covering to door shutters, ducts, etc., cut to size, holes punched including fixing to MS clamps with necessary bolts and nuts complete all as specified and directed. |
| 79 | Preparation of new or previously untreated steel surfaces of any description, exceeding 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 80 | NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 0.00 /- ] |
