Tender For Replacement Of Balance Oh Line Into Ug Line At Shahjahanpur Cantt Under Ge (East) Bareilly; 1 Taking down old unserviceable stay Assembly any type including disconnection of pole connecting complete all as specified and as directed by Engr-In-Charge. 2 Taking down old unserviceable rusted cross Arms of any type including disconnection of pole connecting complete all as specified and as directed by Engr-In-Charge. 3 Taking down old unserviceable LT pole including disconnection of incoming and outgoing connecting complete all as specified and as directed by Engr-In-Charge. 4 Taking down old unserviceable LT UG Cabe including disconnection of incoming and outgoing connecting complete all as specified and as directed by Engr-In-Charge. 5 Taking down old unserviceable LT ACSR conductor overhead line including disconnection of incoming and outgoing connecting complete all as specified and as directed by Engr-In-Charge. 6 Lobour only for re-laying of cable any size as per site reqmt of the all as specefied and direction of Engr-in-charge. 7 Supply and laying in replacement ofXLPE insulated screened PVC bedded galvanised steel strip armoured electric power dable heavy duty 1100 Volt grade with stranded aluminium conductor of size 185Sq mm 3.5 core complete , all as directed. 8 Supply and laying XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cable (heavy duty) with stranded aluminum conductor 1100 Volts grade of size 95 Sqmm 3.5 core complete all as specified& directed. 9 Supply and laying XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cable (heavy duty) with stranded aluminum conductor 1100 Volts grade of size 70 Sqmm 3.5 core complete all as specified& directed. 10 Supply and laying XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cable (heavy duty) with stranded aluminum conductor 1100 Volts grade of size 50 Sqmm 3.5 core complete all as specified& directed. 11 Supply and laying in replacement ofXLPE insulated screened PVC bedded galvanised steel strip armoured electric power dable heavy duty 1100 Volt grade with stranded aluminium conductor of size35Sq mm 3.5 core complete , all as directed. 12 Supply and laying XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cable (heavy duty) with stranded aluminum conductor 1100 Volts grade of size 25 Sqmm 3.5 core complete all as specified& directed. 13 Taking down & Supply and laying XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cable (heavy duty) with stranded aluminum conductor 1100 Volts grade of size 16 Sqmm 4 core complete all as specified& directed. 14 Supply and laying XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cable (heavy duty) with stranded aluminum conductor 1100 Volts grade of size 10 Sqmm 4 core complete all as specified& directed. 15 Supply and laying XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cable (heavy duty) with stranded aluminum conductor 1100 Volts grade of size 10 Sqmm 2 core complete all as specified& directed. 16 S & F steel tubing GILight grade 50 mm bore for fixing of tapping of incoming and outgoing point complete all as specified and directed. 17 S & F steel tubing GILight grade 40mm bore for fixing of tapping of incoming and outgoing point complete all as specified and directed. 18 S & F in replacement of GI tubing light grade 80mm nominal bore for cable protection fixed with clamps of M.S. Flat iron 25x3mm, GI nuts, bolts and washers to poles/under floor/under roads/alongwith walls including two coats of aluminium paint over a coat of red oxide primer on clamps complete all as specified and directed by Engr-in-Charge. 19 M & L for Boring under Road / PCC by using manual tool for inserting, including GI pipe of 80mm size for protection of cable complete all as specified and as directed by the Engineer-In-Charge. 20 Excavation in trenches n. exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying under ground LT XLPEcable and getting soft/loose soil complete. 21 Returning , filling in including spreading, levelling, watering and well ramming in laying not exceeding 25 cm thick in soft/loose soil completeall as specified and directed. 22 Removing excavated material (soils) to a distance not exceeding 50 m and depositing whare directed at a level not exceeding 1.5 mtr above the starting point completeall as specified and directed. 23 Material and labour for riverfine sand, washedand screened dry for caushioning to under ground cable in trenches below and around under ground cable includingspreading and levellingpunningcomplete. 24 M&L for laying bricks, sub class B for protection of cable, in trenches, laid in dry flat across the cable with length of whole bricks complete all as specified and directed. 25 M & L for Cutting of existing RCC Floor/PCC/Tiles for electrical cable and supply and fix tube, light grade, galvanised 25mm dia, necessary connection to TPN DB from LT control panel and making good to the disturbed surfaces of floor from RCC includingto match the existing type etc all as directed 26 Supply and fix Junction box cover made of PVC super fine quality fixed to pole connector block din rail suitable size of aluminium bus bar with 6 amp MCB suitable as per site in locking arrangement completeall as specified and as directed. 27 M & L Copperwire withTwo core 2.5 sqmm PVC insulated 1100 volts gradeconnected from Security light to DB/main boardwith PVC conduit complete all as specified and as directed. 28 M&L for jointing and testing of straight through termination joint (heat shrinkable) suitablefor 3.5 core 11 KV(Earthed) underground XLPE cable of size 50 to 95 sq mm including taking down existing unserviceable joint complete all as specified and as directed. 29 Supply and fixincable end jointing kit for 11 KV grade (Earthed) cable for outdoor termination heat shrink type joint complete with jointing material and all accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 120 to 185 Sqmm. 30 S & F steel tubing GILight grade 32 mm bore for fixing of tapping of incoming and outgoing point complete all as specified and directed. 31 M&Lfor earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick, buried directly in ground, vertically to a depth not less than 2.25 mtr deep below ground level with top edge of the earth plate at depth not less than 1.5 mtr below ground level earth plate surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, earth lead GI strip 32x6mm dia by means of bolts, nuts, check-nuts and washers of galvanized iron and thimbles and of earth wire protected by galvanizediron pipe light grade 15mm bore and water pipe 20 mm bore GI medium grade with funnel and wire mesh complete including excavation and earth work, PCC chamber and cover in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregatein lieu of CI cover and frame etc allas specified and shown in electrical plate No. 3 of SSR-2009 (Part-I). 32 Material & Labour for supply,installing,testing & commissioning of factory madeLT panel outdoor typefor LT distribution switch gear and control gear,floor mounted ,cubical type modular compartment, dust and vermin proof with neoprene gasket fabricated out of CRCA sheet of thick ness not less than 3.15 mm (CPRI Approved) complete with bus bar chamber & AluminiumBus bar of four wire system 415 volt with heat shrinkableinsulator sleeve suitable for 630 A for phases and for neutral having openable front and rear shutters with suitablelocking arrangement epoxy powder spray painted with one coat primercomplete including PCC 1:2:4 type B-1 using 20 mm graded stone agregate foundation raised base angle iron size 50mm x50mmx6mm thick 60cm up and 60cm ground level complete all as specified and directed by the Engr in Charge of the following components:- (Main Panel 3x BN)Contractor should arrange factory visit to Engr-in-charge at own arrangementfor LT Pannel manufacturing. 33 (a) INCOMING :- (i)Supply and fix 4 Pole MCCB ,500 Amp50 Hz 415 V, With Thermal based Release type Capacity 36 KA complete all as specified and directed =01 Nos (incoming)(b) OUTGOING :- (i)Supply and fix 4 Pole MCCB, 50 Hz 415 V, With Thermal based Release type Capacity 25 KA complete all as specified and directed 200=01Nos,160 Amp=01Nos, 125 Amp=01 Nos,100 Amp=01 Nos (c)Supply and fix TPN MCB ,40 Amp50 Hz 415 V, With Thermal based Release type Capacity 16KA complete all as specified and directed =01 Nos(d) Supply and fixR Y B Phase LED based indicator lamp sets comprising of three colours complete all as specified and directed =01 Set (e).Ammeter 0 - 400 Amps, Digital display, flush mounted 3 phase 4 wire with slector switch including CTs of required capacity =01 Nos(f)Voltmeter 0 - 600 Volts, Digital display, flush mounted3 phase 4 wire with slector switch - 01 Nos (g) Supply and fix time switches 415 V three Phase of 20 Amp rating with contactor fitted inside steel enclosure. 34 Supply & fixing in repairinstall testing and commissioning of LT pannel,out doortype cubical shape,three phase, 4 wire, Aluminium bus bar for Cupperbus bar strips with proper colour code -04 Nos 400 A with appropriate , incl insulator, nuts bolts etc complete 3 phases and neutral made out of CRCA sheet 3.15 mm thick ,factory fabricated , CPRI approved , powder coated ,dust and vermin proof , provn for ventilation , angle iron frameand four legs of 50x50x6mm thick angle iron ,2 ft long grouted on PCC foundation of height not less than 30 cm from the ground level , groutingproperly ,and of suitable size to accomodate the items mentioned belowand having seperate compartment /chambers for cable gallery busbar ,switch gear etc all as specified and comprising of following including necessary cableconnectionstotheMCCBs ,voltmeter,Ammeter and cable lugs etc (3x Main office Pannel/QG/MMG)(a) On load Change over switch 100 Amps 4 Pole- 01 Nos (b) Incomming :- MCCB 4 pole, 415 volts of capacity160 Amp, 36 KA, with Thermal Magnetic Release - 01 No(c) Outgoing :- MCCB 4 pole, 415 volts of capacity100 Amp, 25 KA, with Thermal Magnetic Release - 03 Nos(d) MCB TPN , 415 volts of capacity40Amp, 10 KA, with Thermal Magnetic Release - 01 Nos ( e ) Voltmeter,digital type 0- 500 volt,with selector switch - 01 set(f) Ammeter Dital type 0-200Amps, with selector switch and CT-1set ( g ) Phase indicating lamps LED type ( red , yellow, blue) --01 set(h)Supply and fix time switches 415 V three Phase of 20 Amp rating with contactor fitted inside steel enclosure. 35 Material & Labour for supply,installing,testing & commissioning of factory madeLT panel outdoor typefor LT distribution switch gear and control gear,floor mounted ,cubical type modular compartment, dust and vermin proof with neoprene gasket fabricated out of CRCA sheet of thick ness not less than 3.15 mm (CPRI Approved) complete with bus bar chamber & aluminiumBus bar of four wire system 415 volt with heat shrinkableinsulator sleeve suitable for 320 A for phases and for neutral having openable front and rear shutters with suitablelocking arrangement epoxy powder spray painted with one coat primercomplete including PCC 1:2:4 type B-1 using 20 mm graded stone agregate foundation raised base angle iron size 50mm x50mmx6mm thick 60cm up and 60cm ground level complete all as specified and directed by the Engr in Charge of the following components:- Contractor should arrange factory visit to Engr-in-charge at own arrangementfor LT Pannel manufacturing.(3x OTM Panel) 36 (a) INCOMING :- (i) Supply and fix 4 PoleMCCB , 200 Amp50 Hz 415 V, With Thermal based Release type Capacity 36 KA complete all as specified and directed =01 Nos(b) OUTGOING :- (i) Supply and fix 4 PoleMCCB ,100 Amp50 Hz 415 V, With Thermal based Release type Capacity 25 KA complete all as specified and directed =03 Nos(c)Supply and fix TPN MCB ,40 Amp50 Hz 415 V, With Thermal based Release type Capacity 16 KA complete all as specified and directed =01 Nos(d) Supply and fixR Y B Phase LED based indicator lamp sets comprising of three colours complete all as specified and directed =01 set(e).Ammeter 0 - 400 Amps, Digital display, flush mounted 3 phase 4 wire with slector switch including CTs of required capacity =01 Set(f)Voltmeter 0 - 600 Volts, Digital display, flush mounted3 phase 4 wire with slector switch - 01 set.(g) Supply and fix time switches 415 V three Phase of 20 Amp rating with contactor fitted inside steel enclosure. 37 Material & Labour for supply,installing,testing & commissioning of factory madeLT panel outdoor typefor LT distribution switch gear and control gear,floor mounted ,cubical type modular compartment, dust and vermin proof with neoprene gasket fabricated out of CRCA sheet of thick ness not less than 3.15 mm (CPRI Approved) complete with bus bar chamber & CupperBus bar of four wire system 415 volt with heat shrinkableinsulator sleeve suitable for 315 A for phases and for neutral having openable front and rear shutters with suitablelocking arrangement epoxy powder spray painted with one coat primercomplete including PCC 1:2:4 type B-1 using 20 mm graded stone agregate foundation raised base angle iron size 50mm x50mmx6mm thick 60cm up and 60cm ground level complete all as specified and directed by the Engr in Charge of the following components:-Contractor should arrange factory visit to Engr-in-charge at own arrangementfor LT Pannel manufacturing. (3x OR Mess) 38 (a) INCOMING :- (i) Supply and fix 4 Pole MCCB ,100 Amp50 Hz 415 V, With Thermal based Release type Capacity 36 KA complete all as specified and directed =01 Nos(b) OUTGOING :- (i) Supply and fix 4 PoleMCCB ,63 Amp50 Hz 415 V, With Thermal based Release type Capacity 25 KA complete all as specified and directed =03 Nos(c) Supply and fixR Y B Phase LED based indicator lamp sets comprising of three colours complete all as specified and directed =01 set(d).Ammeter 0 - 400 Amps, Digital display, flush mounted 3 phase 4 wire with slector switch including CTs of required capacity =01 Set(e)Voltmeter 0 - 600 Volts, Digital display, flush mounted3 phase 4 wire with slector switch - 01 set. 39 Material & Labour for supply,installing,testing & commissioning of factory madeLT panel outdoor typefor LT distribution switch gear and control gear,floor mounted ,cubical type modular compartment, dust and vermin proof with neoprene gasket fabricated out of CRCA sheet of thick ness not less than 3.15 mm (CPRI Approved) complete with bus bar chamber & aluminium Bus bar of four wire system 415 volt with heat shrinkableinsulator sleeve suitable for 315 A for phases and for neutral having openable front and rear shutters with suitablelocking arrangement epoxy powder spray painted with one coat primercomplete including PCC 1:2:4 type B-1 using 20 mm graded stone agregate foundation raised base angle iron size 50mm x50mmx6mm thick 60cm up and 60cm ground level complete all as specified and directed by the Engr in Charge of the following components:- (JCO Mess/MT/Stores,Edn,OR Inst FWC Stores)Contractor should arrange factory visit to Engr-in-charge at own arrangementfor LT Pannel manufacturing. 40 (a) INCOMING :- (i)Supply and fix 4 Pole MCCB ,125 Amp50 Hz 415 V, With Thermal based Release type Capacity 35 KA complete all as specified and directed =01Nos(b) OUTGOING :- (i) Supply and fix 4 Pole MCCB ,63 Amp50 Hz 415 V, With Thermal based Release type Capacity 25 KA complete all as specified and directed =03 Nos(c)Supply and fix TPN MCB ,40 Amp50 Hz 415 V, With Thermal based Release type Capacity 16 KA complete all as specified and directed =01 Nos(d) Supply and fixR Y B Phase LED based indicator lamp sets comprising of three colours complete all as specified and directed =01set(e).Ammeter 0 - 400 Amps, Digital display, flush mounted 3 phase 4 wire with slector switch including CTs of required capacity =01 Set(f)Voltmeter 0 - 600 Volts, Digital display, flush mounted3 phase 4 wire with slector switch - 01 set.(g) Supply and fix time switches 415 V three Phase of 20 Amp rating with contactor fitted inside steel enclosure. 41 Supply and fix testing and commissioning Out door type Bus bar made out of MS CRCA sheet 2mm thick of size 0.60 Mtrx0.60mtrx0.30 mtr consisting of aluminium Bus Bar of rating 400 Amps working 4 wire system 415 volt mounted on various insulator with MCCB 100 Amp cable earth alleys including steel flexible pipe as per required length at site with new aluminium lugs of suitable size including making connection properly of existing cables of any size/type for existing new incoming and outgoing cables complete all as specified and as directed by Engr-In-Charge. Note :Bus Bar mounting stand made out of angle iron of size 50mm x50mm x 6mm, 600 mm high and size suitable to mount the panel includingfoundation of PCC (1:3:6) type C-1 using 20mm graded stone aggregate with and including excavation and earth work in any type of soil complete.Contractor should arrange factory visit to Engr-in-charge at own arrangementfor LT Pannel manufacturing.
