Repair To Misc Type Of Wooden Far Including Canning Wk For Offrs/Jcos/Ors/Civ Md And Otm Accn At Niwaru/Jaipur And Other Area Under Aor Of Ge Jaipur; 1 Old material in pieces of hard wood retrieved Leg 1.01-1.04, 2.01-2.05, 2.08, 3.01-3.04, 4.01- 4.04, 5.01-5.04, 6.01- 6.02, 7.01-7.03, 8.01- 8.04, 9.01-9.04, 10.01- 10.05, 11.03-11.07, 12.01-12.04 Kg 500.00 5.00 2500.00 2 Old U/S pieces of plywood retrieved 2.06, 2.07, 6.04, 6.06, 10.07, 11.01-11.02, 14.01 Kg 50.00 2.00 100.00 3 Old U/S pieces of particle board retrieved 6.03, 6.05, 13.01-13.02, 14.02, 14.04, 14.05, 15.00-17.00 Kg 150.00 2.00 300.00 4 Old U/S CP knobs 6.07, 14.03 Each 450.00 0.50 225.00 5 Old U/S sofa cushion 12.05 Set of 10 100.00 50.00 5000.00 6 Old U/S Particle board top 19.01-19.09 Each 1050.00 5.00 5250.00 7 Old U/S headboard and footboard 20.01-20.02 Each 120.00 25.00 3000.00 8 Old U/S hard wood long rails, side rails, stiffner of bed 20.03-20.05 Each 230.00 20.00 4600.00 9 Old U/S plywood of bed 20.06 Each 400.00 10.00 4000.00 10 Old U/S cane plastic 21.01-21.06 Kg 300.00 5.00 1500.00; 1 Teapoy wooden (1.01 to 1.04) : Removing of old unserviceable wooden part and S&F new part made out of 1st class hard wood (Teak) of size, shape & design as shown on drg including tightening the joints by pinning, screwing, nailingand placing every part intact. All new surfaces shall be finished with two coat of french polish with high gloss finish all as specified in drg and directed by Engr-in-charge. Drg No. : 278, 382 2 Leg 3 Side Rail 4 Front / back rail 5 L type bracket of size 75mm X 75mmX20mm fixed with screws 6 Table 3x2 with or without drawer (2.01 to 2.08): Removing of old u/s part and S&F new part made out of 1st class hard wood (Teak) of size and shape & design as per drg including tightening the joints by pinning, screwing, nailing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finish all as specified in drg and directed by Engr-in-charge. Drg No. : 283, 284 7 Leg 8 Front/rear rail 9 Side rail 10 Middle stiffeners 11 Side stiffeners 12 Bottom ply of drawers (commercial ply woods of size 550mm x 310mm x 6mm). 13 Side members of drawer 14 L type bracket of size 75mm X 75mmX20mm fixed with screws 15 Table4 x 3 (3.01 to 3.04): Removing of old u/s part and S&F new part made out of 1st class hard wood (Teak) of size and shape as per drawing including tightening the joints by pinning, screwing, nailing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finish all as specified in drg and directed by Engr-in-charge. Drg No. : FD/MAP-II/-03 16 Front/back rail 17 Side rail 18 Leg 19 L type bracket of size 75mm X 75mmX20mm fixed with screws 20 Table dining 6 person (4.01 to 4.04): Removing of old u/s part and S&F new part made out of 1st class hard wood (Teak) of size and shape as per drawing including tightening the joints by pinning, screwing, nailing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finish all as specified in drg and directed by Engr-in-charge. Drg No. : FD-239, 269, 273, FD/Map-II/03 21 Front/back rail 22 Side rail 23 Leg 24 L type bracket of size 75mm X 75mmX20mm fixed with screws 25 Table dining 8 person (5.01 to 5.04) : Removing of old u/s part and S&F new part made out of 1st class hard wood (Teak) of size and shape as per drawing including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finish all as specified in drg and directed by Engr-in-charge. Drg No. : FD-239, FD-273,FD-376 26 Front/back rail 27 Side rail 28 Leg 29 L type bracket of size 75mm X 75mmX20mm fixed with screws 30 Table writing(6.01 to 6.07) : Removing of old u/s part and S&F new part made out of 1st class hard wood (Teak) of size and shape as per drawing including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finish all as specified in drg and directed by Engr-in-charge.all as specified in drg and directed by Engr-in-charge. Drg No. : FD-249, 275 31 Leg 32 Front/ back rail 33 Bottom base of box 18mm thick commercial MDF board (ISI marked) 34 Back ply box 6mm thick commercial ply (ISI marked) 35 Front door 18mm pre-laminated MDF board including knob and hinges piano type continuous. 36 Bottom of drawer 6mm thick commercial ply (ISI marked) of size 600mm x 450mm . 37 Knobs 50mm of chromium plated of approved coloured and standard quality. 38 Table 3x3 (7.01 to 7.03) : Removing of old u/s part and S&F new part made out of 1st class hard wood (Teak) of size and shape as per drawing including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finish all as specified in drg and directed by Engr-in-charge. Drg No. : FD-88M, 291 39 Leg 40 Front/side rail 41 L type bracket of size 75mm X 75mmX20mm fixed with screws 42 Table Peg (8.01 to 8.05) : Removing of old u/s part and S&F new part made out of 1st class hard wood (Teak)of size and shape as per drawing including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finish all as specified in drg and directed by Engr-in-charge. Drg No. : FD-25, 277, 384, 236 43 Leg 44 Front rail 45 Side rail 46 L type bracket of size 75mm X 75mmX20mm fixed with screws 47 PVC Shoes 48 Table Centre (9.01 to 9.05) Removing of old u/s part and S&F new part made out of 1st class hard wood (Teak)of size and shape as per drawing including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finish all as specified in drg and directed by Engr-in-charge. Drg No. : FD-274, 134(M), 235, 267, 393 49 Leg 50 Front/rear rail 51 Side rail 52 L type bracket of size 75mm X 75mmX20mm fixed with screws 53 PVC Shoes 54 Chair WB (10.01 to 10.07) : Removing of old u/s part and S&F new part made out of 1st class hard wood (Teak)of size and shape as per drawing including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finish all as specified in drg and directed by Engr-in-charge.all as specified in drg and directed by Engr-in-charge. Drg No. : FD-285 55 Stiffener 56 Front/Side/ rear rail 57 Back Support 58 Front leg 59 Rear leg 60 PVC Shoes 61 Taking out u/s seat of chair WB and S&F new seat of 12mm ply with polyureathene foam 75mm thick moulded with density 40kgs per cum with fibre cloth of approved colour and shade with black PVC beeding including necessary nut bolts and washer 62 Chair Easy with cusioned (11.01 to 11.08) Removing of old u/s part and S&F new part made out of 1st class hard wood (Teak)of size and shape as per drawing including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finish all as specified in drg and directed by Engr-in-charge. Drg No. : FD-358 63 Taking out u/s seatof Chair Easy cusioned and S&F new seat 12mm, teak ply with poly urethane foam 75mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shade with black pvc beeding including necessary nut bolts and washer. 64 Taking out unserviceable back of Chair Easy cusioned and S&F new back 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shade with black pvc beeding including necessary nut bolts and washer. 65 Stiffener 66 Front/Side/ rear rail 67 Back Support 68 Front leg 69 Rear leg 70 PVC Shoes 71 Sofa Set (12.01 to 12.06) Removing of old u/s part and S&F new part made out of 1st class hard wood (Teak)of size and shape as per drawing including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finish all as specified in drg and directed by Engr-in-charge.all as specified in drg and directed by Engr-in-charge. Drg No. : FD-373, 281 72 Leg 73 Sides of sofa seat 74 Bottom / back strips set of sofa setplanks of sofa set 75 Handle of single seat 76 Removing the existing u/s cushion and replacing with new 100mm thick cushion of cool foam of 40 density covered with and incl new best quality of tapestry clothMake - Sleepwell/Kurlon or eqvt, all as shown on drgs and as approved by GE. Note :- Set of 10 cushion for seat or back will be measured as single unit and tapestry cloth should not be less than Rs 250/mtr 77 Removing of old unserviceable tapestry cloth from cushion of sofa set and S&F new best quality of tapestry cloth and stitched on cushion with zip pattern with best quality zip removable easy to wash as shown on drawing. Note :- Set of 10 cushion for seat or back will be measured as single unit and tapestry cloth should not be less than Rs 250/mtr 78 Table Bed Side (13.00 to 13.02): Removing of u/s part and S&F new part of pre laminated MDF board 18mm thick ISI marked including teak wood edging duly shaped as per drawing including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. Drg No. : FD-248,FD-276 79 Top/middle/bottom shelf 80 Sides pane including legs 81 Side board (14.01 to 14.05) Removing of u/s part and S&F new part of pre laminated MDF board 18mm thick ISI marked including teak wood edging duly shaped as per drawing including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. Drg No. : FD-241, 371, 372 82 Back side 6mm thick commercial ply wood (ISI marked) 83 Shutter fixed with piano type hinges continuous 20mm. 84 Knobs 50mm chromium plated of approved colour and pattern of standard quality. 85 Top base 86 Sides pane including legs 87 Table dressing (Ladies) : Removing of unserviceable part of furniture and supply and fixing new part made out of MDF board prelaminated duly shaped as per drawing and fixing with other member by Fevicol and bamboo pins including polishing to replaced part of wooden to match with existing part to make the serviceable item and removing existing U/S mirror with ply of table dressing ladies and S/F new mirror 5.0mm thick of clear vision (Make : Modiguard, Saint Gobin or equivalent) with 6mm thick ply fixed at back and Teak ply all three side. Drg No. : FD-251, 378 88 Table dressing (Ladies) : Removing of unserviceable part of furniture and supply and fixing new part made out of MDF board prelaminated duly shaped as per drawing and fixing with other member by Fevicol and bamboo pins including polishing to replaced part of wooden to match with existing part to make the serviceable item and removing existing U/S mirror with ply of table dressing ladies and S/F new mirror 5.0mm thick of clear vision (Make : Modiguard, Saint Gobin or equivalent) with 6mm thick ply fixed at back and MDF Board all three side. Drg No. : FD/E6/MAP/16 89 Table dressing gents: All as per item No 15 above but Removing existing U/S mirror with ply of table dressing gents and S/F new mirror 5.0 mm thick of clear vision (Make : Modiguard, Saint Gobin or equivalent) with 6mm ply on back . Drg No. : FD-230,379 90 Polishing description (for 18.01 to 18.19) : M&L preparation of wooden surfaces by cleaning, scrapping by electric grinder and smoothing of surfaces with sand paper and applying one coat of French polish on the wooden part of furniture. Minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing complete all as specified and directed by Engr-in-charge. 91 Teapoy wooden Drg No. : FD-278, 382 92 Table 3x2 with drawer Drg No. : FD-284 93 Table 3x2 without drawer Drg No. : FD- 283 94 Table dining 4’ x 3’. Drg No. : FD-273 95 Table dining 6 person Drg No. : FD-239, 269, 273, FD/Map-II/03 96 Table dining 8 person Drg No. : FD-239,FD-273,FD-376 97 Table writing Drg No. : FD-249, 275 98 Table 3x3 wooden Drg No. : FD-88M, 291 99 Table Peg Drg No. :FD-25, 277, 384, 236 100 Table Centre Drg No. : FD-274, 134(M), 235,267,393 101 Chair WB without arms Drg No. : FD-285 102 Bed with plytop Drg No. : FD-246 & 247 103 Sofa set 5 seater. Drg No. : FD-281, FD-373 104 Sofa set 4 seater. Drg No. : FD-281, FD-373 105 Chair dining wooden Drg No. : FD- 228, 262, 270, 279 106 Chair easy Drg No. : FD- 201, 229 107 Chair writing wooden Drg No. : FD-280 108 Replacement of TOP (19.01 to 19.09): Taking out unserviceable top from Tables and S&F new top made out of 18mm thick pre laminated MDF board exterior quality including 4mm thick teak wood edging all around the top duly polished of size as shown on drg and as directed. 109 Teapoy wooden Drg No. : FD-278, 382 110 Table 3x2 with or without drawer Drg No. : FD-284 111 Table dining 4’ x 3’. Drg No. : FD-273 112 Table dining 6 person Drg No. : FD-239, 269, 273, FD/Map-II/03 113 Table dining 8 person Drg No. : FD-239,FD-273,FD-376 114 Table writing Drg No. :FD-249, 275 115 Table 3x3 Drg No. : FD-88M, 291 116 Table Peg Drg No. :FD-25, 277, 384, 236 117 Table Centre Drg No. : FD-274, 134(M), 235,267,393 118 Bed with plytop (20.01 to 20.06): Removing the existing unserviceable / broken parts and S&F new part made out of first class hard wood (Teak wood/Bonsum) of size and shape as specified and shown on drgs including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. Drg No : FD-246 & 247 119 Head board alongwith the legs 120 Footboard alongwith the legs 121 Centre stiffeners 122 Long rail for size 35x90x1980 mm including 35 mm x 5mm flat iron of mild steel bent to right angles to be provided as directed by Engr-in-charge 123 Short rail 124 Removing of existing unserviceable ply woodand S&F new plywoodof size 1950X900X12mm commercial BWR Make: Kitply/Century Ply/Archidply. 125 Recanning description(20.01 to 20.06): M&L Re-canning with plastic cane of 1/2 round 2mm wide & 0.40mm thick, woven and border around and back with 4mm wide of approved quality (white/cream in colour of make -shah/BR Super/Aryan) including removing of old canning, tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. 126 Chair dining wooden Drg No. : FD- 228, 262, 270, 279 127 Chair writing wooden Drg No. : FD-280 128 Chair easy seat & back Drg No : FD-201, 229 129 Stool dressing CB Drg No : FD-252, 282 130 Bin soil linen Drg No : FD-212, 244 131 Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule A/BOQ
