|
| 1 | Supply and delivery and fixing of 2.5sqmm. Cable PVC insulated and sheathed 3 core flat type copper confiming to Is 694/1990 including labour charges etc., complete and as directed by the departmental officers. |
| 2 | Supply and delivery and fixing of 4 sqmm. Cable PVC insulated and sheathed 3 core flat type copper confiming to Is 694/1990 including labour charges etc., complete and as directed by the departmental officers. |
| 3 | Laying of GI Pipes and Specials to proper line and level including jointing but excluding cost of Pipes and jointing materials for plumbing works for providing water supply arrangements etc.,complete. |
| 4 | 11/2\"GI Pipe |
| 5 | Supply and delivery and fixing of spares for borewell motors & pumps including cost of all at site etc., Completelabour charges etc., complete. |
| 6 | 63 Amps Porcelain fuse unit (500 V) |
| 7 | Supply and delivery and fixing of spares for borewell motors & pumps including cost of all at site etc., Complete( Local Market Rate) and as directed by Departmental Officers.. |
| 8 | Machining |
| 9 | 50mm GM Non return valve |
| 10 | Pump IB |
| 11 | Motor housing |
| 12 | Cable card |
| 13 | Stainer |
| 14 | Pump patta |
| 15 | SS Pump sleve |
| 16 | Pumpshaft |
| 17 | Circlip |
| 18 | Carbon pad |
| 19 | Segment set |
| 20 | Welding & Lath works |
| 21 | Pump rubber push |
| 22 | Motor Thrust Bearing |
| 23 | Pump Impeller (Per stage) |
| 24 | GM Pump Push |
| 25 | Oil seal |
| 26 | MV Conductor |
| 27 | M10 Stud |
| 28 | Supply and delivery and fixing of following spares for panal board etc., Complete, and as directed by the Departmental officers. |
| 29 | 16 Amps BCH contractor Knop set |
| 30 | 13 to 21 Amps BCH relay |
| 31 | Contractor Kit |
| 32 | Volts meter |
| 33 | Amps meter |
| 34 | Labour charges forStarter & Pannel Board service work & Small works etc., Complete, and as directed by the Departmental officers. |
| 35 | Supply and delivery and fixing of spares for compressor and motor including cost of all at side etc., Completelabour charges etc., complete. |
| 36 | Rings |
| 37 | Piston |
| 38 | Blade |
| 39 | Connecting rod beaing |
| 40 | Oil seal |
| 41 | Oil (1 Liter Pack) |
| 42 | Oil guage |
| 43 | Connecting push |
| 44 | 5 HP terminal plate |
| 45 | Filter set |
| 46 | Connecting pin |
| 47 | Bearing |
| 48 | Labour charges forfixing of compressor and motor spares and servicing as as Directed by the Departmental officers. |
| 49 | Removing of bore well / open well submesible motor upto 5HP into the Borewell etc., Completelabour charges etc., complete. |
| 50 | Removing of bore well/open well submersible motor Above 5 HP to 10 HP the borewell etc., Completelabour charges etc., complete. |
| 51 | Removing of bore well/open well submesible motorAbove 10HP To 20 HPinto the Borewell etc., Completelabour charges etc., complete. |
| 52 | Refixing of bore well / open well submesible motor upto 5HP into the Borewell etc., Completelabour charges etc., complete. |
| 53 | Refixing of bore well/open well submersible motor Above 5 HP to 10 HP the borewell etc., Completelabour charges etc., complete. |
| 54 | Refixing of bore well/open well submesible motor10HP To 20 HPinto the Borewell etc., Completelabour charges etc., complete. |
| 55 | Rewinding of coil in the old upto 5 HP submersible motor etc., Complete and as Directed by the Departmental officers. |
| 56 | Rewinding of coil in the old 5HP to 10HP submersible motor etc., Complete and as Directed by the Departmental officers. |
| 57 | Rewinding of coil in the old Above 10HP To 20 HP/10HP/ 15/20HP submersible motor etc., Complete and as Directed by the Departmental officers. |
| 58 | Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete as per standard specifications. |
| 59 | Supplying and filling in foundation andbasement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. |
| 60 | Cement concrete in 1:4:8 mix (One cement, four sand and eight aggregate) using 40mm ISS hard broken granite metal from approved quarry including cost, conveyance of all to site, mixing, laying and curing charges etc., complete as per standard specification. |
| 61 | Brick work in following Cement Mortar using Fly Ash Bricks of 230 x 110 x 70mm size conforming to IS: 12894-1989 Class designation not less 50 kg./ sq.cm. average compressive strength in cement mortar 1:5 for load bearing structures for foundation and basement and for superstructure including curing, etc., complete complying with standard specifiction.In Cement Mortar 1:6 |
| 62 | Plastering with cement mortar 1:5 mix (one cement and five sand) 12mm thick including cost, conveyance of all to site,loading and unloading charges and labour charges for mixing, laying and curing and as directed by the departmental officers etc., complete complying with standard specifications as per TNDSS No.56 & 57. |
| 63 | Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. |
| 64 | Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,1 |
| 65 | Supply delivery and fixing of (four pole 63A,10KA) Miniature Circuit Breakers 240v/415v 50HZ-AC Supply suitable for Both lighting and motor circuits.Legrand/Hager etc complete., |
| 66 | Supply delivery and fixing of 32 AmpsPorcelain fuse unit(500 V)(Anchor/Equivalent) etc complete., |
| 67 | Supply and run of 4 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains etc. ( SD 67) |
| 68 | Supply,delivery and fixing of Earth set, earth link 1\"x1/8\" flat with bolt nut accessories etc complete., |
| 69 | Supply delivery and fixing of MS box of 30 cmx20cmx l0cm with angle iron frame work for housing the condensor, choke fuse unit SP switch with lock and Key arrangements. SD 98 |
| 70 | Supply delivery and fixing of TW Plank of size 600mmx450mmx19mm with supporting reepers of 1\" thick on both side with painting and with bolt and nut and washer etc complete., |
| 71 | Supply delivery and fixing of MS BOX For size 200 x 150 x 75 mm4/3 Pole MCB With proper shape and fitting arrangements,and including all labour charges etc complete., |
| 72 | Towards the charges for submersible stuck up motor in the borewell including cost of labour and maintenance for removing the stuck up motor pumpset upto 5HP/7.5HP/10HP etc complete as per standard specifications. |
| 73 | Rate for flushing of borewell of 6\" dia requiring less than 4 hours operation using drill rods/ hose with required size of pipes for various capacity compressor including transportation, labour, and fuel charges for compressors as directed by the TWAD Officer and conducting yield test by \"V\" notch method if required. |
| 74 | Towards the charges for deduction of old scrap materials etc complete as per standard specifications. |
| 75 | add GST 18% |
