|
| 1 | Bowl assembly S.S. shaft 410 |
| 2 | Bowl assembly gum metal impellers |
| 3 | Neck Ring gun metal impeller |
| 4 | Providing and fixing Bowl assembly gun metal bush |
| 5 | Bowl assembly rubber bush |
| 6 | Line shaft EN.8 |
| 7 | S.S. slues |
| 8 | Line shaft coupling |
| 9 | Gun metal spider |
| 10 | Spider rubber bush |
| 11 | Bowl assembly bolt T.V.S. |
| 12 | Casing pipe nut bolt |
| 13 | Rubber seat |
| 14 | T.T. plate |
| 15 | Gun Metal |
| 16 | Rewinding 100 HP motor |
| 17 | Motor bearing 6316 |
| 18 | Motor bearing 29324 |
| 19 | Transportation arrangement of V.T. pump set for site to work shop |
| 20 | Removing of 100 HP pump set for repairs from jack well |
| 21 | Disassembling of V.T. pump set in work shop |
| 22 | Errection of V.T. pump set on jack well after repairs and giving test and trial on load |
| 23 | Errection of 100 HP motor opening & fitting |
| 24 | Bowl assembly new Impeller Bronze |
| 25 | 100 HP Motor opening & fitting |
| 26 | Line shaft cleaning throwing on lathe machine |
| 27 | Contactor 150 A. Star |
| 28 | Single phase preventer |
| 29 | Timer |
| 30 | ATS Rewinding 100HP Motor |
| 31 | Contactor 415 MCB panel board |
| 32 | Starter contactor 225 |
| 33 | Starter contactor 150 |
| 34 | Starter contactor 125 |
| 35 | Engine Oil |
| 36 | Kitkat 200 Amp |
| 37 | 100 HP terminal plate |
| 38 | Ν.Ο.C. |
| 39 | Relay 100Hp |
| 40 | Copper Luggs 90 mm |
| 41 | Copper Luggs 70 mm |
| 42 | Copper Luggs 50 mm |
| 43 | Copper fuse wire |
| 44 | MCB 200 AMP |
| 45 | Star Washing Repairing Transport Charges |
| 46 | T.T. Plate Gun Metal Bush |
| 47 | 200 MCB |
| 48 | 150 MCB |
| 49 | 125 MCB |
| 50 | Copper wire 30mm |
| 51 | Copper wire 20mm |
| 52 | Copper wire 10mm |
| 53 | Brass nut bolt 12 mm |
| 54 | Brass nut bolt 10 mm |
| 55 | NO. NC (MNX) |
| 56 | Bus bar copper patty |
| 57 | Bus bar Holder |
| 58 | Over load relay |
| 59 | Transformer oil |
| 60 | Indicator |
| 61 | Push bottom on-off |
| 62 | Sensor rod |
| 63 | Volt meter 4\" |
| 64 | Ampere meter 4\" 0 to 150 Amp |
| 65 | P.T. coil |
| 66 | C.T. coll |
| 67 | Emergency stop |
| 68 | Controlling wiring |
| 69 | Power wiring for 200 Amp |
| 70 | Repairs of 75 HP VT (Oil Lubricating) pump set |
| 71 | 75 HP Motor opening and fitting |
| 72 | Providing and fixing G.M. screw bearing as per sample with oil grove |
| 73 | Providing and fixing G.M. bearing big size as per sample |
| 74 | Providing and fixing T.T. plate as per sample |
| 75 | Providing and fixing T.T. Plate bushes as per sample |
| 76 | Line shaft cleaning throwing on lathe machine |
| 77 | 50mm dia Tube cleaning throwing in work shop |
| 78 | Providing and fixing rubber spider/ture supported 200mm dia |
| 79 | Providing and fixing TVS not bolts for cloning assembly |
| 80 | Providing and fixing rubber packing/flange rubber joints |
| 81 | Providing and fixing S.S. shaft couplings as per sample |
| 82 | Removing of 75 HP VT pump set for repairs form jack well (LB-7-P-87) |
| 83 | Disassembling of V.T. pump set/Bowl assembly in work shop for repairs ( LB-7-P-87) |
| 84 | Providing and fixing impeller neck ring as per sample |
| 85 | Providing and fixing bowl assembly G.M. bushes as per sample |
| 86 | Providing and fixing bowl assembly rubber bushes |
| 87 | Providing and fixing Bowl assembly upper and lower bushes |
| 88 | Providing and fixing of impeller shaft of size s.s. 410 as per sample |
| 89 | Providing and fixing EN 8 top shaft of size as per sample |
| 90 | Providing fixing line shaft EN & New 38mm dia 5 feet |
| 91 | Assembly of Bowl assembly/pump in work shop |
| 92 | Errection of VT pump set/moor on jack well after repairs and giving test trial on load |
| 93 | Making transportation arrangement of VT pump set from site to work shop and back |
| 94 | Providing and fixing 50mm dia shaft enclosing tube for top shaft |
| 95 | Rewinding of 75 HP motor (V.T.) |
| 96 | 75 HP motor bearing NO. 29324 |
| 97 | 75 HP motor bearing NO. 6316 |
| 98 | Impeller Bowl assembly (V.T.) Gun metal emplier |
| 99 | Repairs 75 HP V.T. pump Oil Starter |
| 100 | Contact moveable |
| 101 | Contact fixed |
| 102 | Holding coil 440 V |
| 103 | Transformer Oil |
| 104 | Connection rod |
| 105 | Movable contact patty copper luges |
| 106 | Starter wiring & repairing charges |
| 107 | 75 HP VT (Water lubricating) pump repairing |
| 108 | 75 HP Bowl Assembly SS shaft |
| 109 | 75 HP Bowl Assembly Gunmetal Impeller |
| 110 | 75 HP Impeller neck ring gunmetal |
| 111 | 75 HP Providing and fixing bow! assembly |
| 112 | 75 HP Gunmetal bush Bowl |
| 113 | 75 HP Bowl assembly rubber bush |
| 114 | 75 HP SS line shaft |
| 115 | 75 HP SS line shaft sleeve |
| 116 | 75 HP line shaft coupling |
| 117 | 75 HP Gunmetal spider |
| 118 | 75 HP spider rubber bush |
| 119 | 75 HP bowl assembly TVS bolt |
| 120 | 75 HP casing pipe nut bolt TVS |
| 121 | 75 HP casing pipe rubber seat |
| 122 | 75 HP TT plate |
| 123 | 75 HP Gun metal Gland |
| 124 | 75 HP Motor Rewinding (Without Return Copper wire scrap material) |
| 125 | 75 HP Motor Rewinding (Return Copper wire scrap material) |
| 126 | 75 HP Motor Bearings 6316 |
| 127 | 75 HP ATS Auto Tranformer Repairing |
| 128 | 75 HP Contactor 225 |
| 129 | 75 HP Contactor 125 |
| 130 | 75 HP Single Phase Preventer |
| 131 | 75 HP Timer |
| 132 | 75 HP ATS Rewinding |
| 133 | 75 HP NOC |
| 134 | 75 HP Relay set |
| 135 | 75 HP Copper lugz 90 MM |
| 136 | 75 HP CT Coil |
| 137 | 75 HP P.T. Coil |
| 138 | 75 HP Voltage Meter |
| 139 | 75 HP Ampere Meter |
| 140 | 75 HP Emergency Stop |
| 141 | 75 HP A.T.S Starter Repairing |
| 142 | 75 HP M.C.B. 200 |
| 143 | 75 HP M.C.B. 150 |
| 144 | 75 HP M.C.B. 125 |
| 145 | 75 HP NO/NC(MNX) |
| 146 | Transport Charges |
| 147 | 75 HP Motor Bearings 29324 |
| 148 | 75 HP Transport VT pump set site to workshop and return to site |
| 149 | ATS Rewinding (Without Return Copper wire scrap material) |
| 150 | ATS Rewinding (Return Copper wire scrap material) |
| 151 | 300 MM Sluice valve |
| 152 | 200 MM Sluice valve |
| 153 | 150 MM Sluice valve |
| 154 | 100 MM Sluice valve |
| 155 | Line Shaft through and eleating |
| 156 | 75 HP Treminus plate |
| 157 | 75 HP TT Plate Gun Metal bush |
| 158 | 25 HP Pannel Board New |
| 159 | Change our 100 MPR |
| 160 | 100 A MCB |
| 161 | Contractor 25 M.P.R |
| 162 | Relay |
| 163 | MCB 30 |
| 164 | CT Coil |
| 165 | Filter Motor Reapiring |
| 166 | Cannel 5 HP Motor cannel board New Starter |
| 167 | MCB 30 MPR |
| 168 | Contractor Realy |
| 169 | Volt meter |
| 170 | Ampere meter |
| 171 | Indicator Bulb |
| 172 | Changer 25 HP |
| 173 | Push Button |
| 174 | Swich Rutri |
| 175 | 2.5 Cable ( 3 Skiter MM) 1 meter |
| 176 | 25 HP Motor Rewinding (Without Return Copper wire scrap material) |
| 177 | 25 HP Motor Rewinding (Return Copper wire scrap material) |
| 178 | 25 HP ATS starter repair |
| 179 | 25 Air blower repair |
| 180 | New Column Pipe with flange 200MM |
