Limited Tender Furnishing Works Kushalnagar Branch And Atm Under Ro Hassan => Limited; 1 Plywood: KITPLY VISTA/ARCHID GOLD, PUREPLY - MR GRADE 2 Laminate: IVS ROYAL TOUCHE- Cedar (968), Palm Beech (948) or equivalent make- Greenlam, Formica, Century, Merino CF finish of approved color and shade by Architect. 3 All hardware to be of EBCO make ISI Standard only. 4 Door Closure- DORMA / GODREJ only 5 Glazing and Glass door hardware- OZONE Make 6 Glass: - Asahi/Modiglass/St Gobain Float glass toughened 12mm thk. 7 Adhesive: Fevicol/ Falcofix make only. Bubbles appearing in laminate, will require relamination of entire area and not just repair work. 8 False ceiling: a India gypsum make 12.5 mm thk sheets finished with one coat of primer and two coats of plastic emulsion paint. Partitions will not be measured above finished line for false ceiling. b Ceiling tiles: 15mm sillouhte grid (black line), RH90 and above DUNEMAX ARMSTRONG Make only, both tiles and grid. 9 Aluminum Sections: 16 gauge Jindal make 10 Aluminum Composite Panel: Eurobond / Aludecor /Alukbond Interior Grade 4 mm thick 11 Frosting film- 3M make 12 Granite 18mm thk- Lakha red 1.0 Providing and fixing double skin full height partitions of upto 8 - 110/ 3300 mm or nearabout height using 50mm x 50mm Aluminium box section frames in both directions along with 12mm thick BWR ply wood on both sides and lining with 1mm thk. lamination of approved shade and texture along with grooves. The rate shall include the cost of providing skirting of 100mm wide lined with 1mm thk laminate and providing & fixing a border at top of 100mm wide lined with 1mm thk laminate complete. The rate also includes providing & fixing solid core flush door of size: 3 0 x 7 0 and 35mm thk with 1.0mm Laminate on both sides. The rate shall include a door frame of CW section covered by 3 X 1 1/2 white beach or white ceader beading of same size as frame with enamel paint shall be provided. The rate shall include necessary hardwares and accessories like cylindrical lock, heavy duty 6 hinges, Door closure, Door stopper, Night Latch, etc., complete. The partition shall be rigidly fixed to the ceiling with adequate supports above false ceiling which will not be considered for payment.NOTE (The measurement to be taken visible area only i.e above false ceiling measurement can not be consider ) Glazed Partition/Cash Cabins for Manager Cabin Sft 120.00 Toughened Glass Partition for Manager Cabin/Entrance/atm Sft 0.00 To be made out of 12mm thk toughened glass with etching as per design.The glass with etching has to be fixed with top and bottom SS patch fittings of DORMA make as per design. The glass with etching has to be fixed with the fixed portion and Heavy duty floor spring of DORMA (or equivalent) make for the swing portion. The doors will also have 3 feet long SS H type handles for both the doors bothways. The entire work to be done as per the directions of the Architect. NB: Since patch fittings and floor springs is separate item need not quote for that. The above item includes handle, toughened glass, etching and fixing of door only. Solid Full Hieght Partition for, Record Room and Above toughened glass Sft 430.00 LOW HEIGHT PARTITION 1.1 Providing and fixing double skin low height partitions of upto 4 - 6,4-0 / 1350 /1200mm or nearabout height using 50mm x 50mm Aluminium box section frames in both directions along with 12mm thick Commercial ply wood lined on both sides and lining with 1mm thk. lamination of approved shade and texture along with grooves. The rate shall include the cost of providing skirting of 100mm wide lined with 1mm thk laminate and providing & fixing a border at top of 100mm wide lined with 1mm thk laminate complete. The rate shall also include the cost of providing and fixing Teak wood trims of size not less than 75mmx20mm to shape for all exposed edges on top and sides including polishing and finishing with melamine matte finish tinted to approved shade and texture. Cubicles & work stations. Sft 100.00 SUB TOTAL VALUE OF PARTITION WORKS B FALSE CEILING WORKS Gypaum Board Fasle Ceiling 1.0 Providing and fixing at all height false ceiling of 12.5mm thick tapered edge gypsum board conforming to IS: 2095 including providing and fixing of frame work made of special sections power pressed from MS sections and galvanized in accordance with zinc coating 600 as per IS: 277 and consisting of MS angles cleats of size 25mm wide x 16mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one edge fixed to the ceiling with dash fastener 12.5mm dia x 40mm long with 6mm dia bolts to the angle hangers of 25x25x5mm of required length and other end of angle hanger being fixed to being fixed with nuts and bolts to GI channels 45mm x 15mm x 0.90mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom edge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed to the direction perpendicular to GI channel with connecting clips made out of 2.64mm diax230mm long GI wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to the wall /partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the gypsum board with recommended filler, paper tapes, finisher including painting with two or more coats acrylic emulsion paint White/Pine Apple Shade- 908/399 of ASIAN PAINTS) over a coat of primer of approved make and shade and the cost of making openings for light fittings, AC diffusers and continuous grlls,cutouts made with frame of perimeter channels suitably fixed complete. The rate shall hold good for laying the false ceiling for the vertical surfaces also (with levels). payments to be made for all the exposed surfaces only. Sft 1000.00 Grid False Ceiling 1.1 Providing and fixing of Armstrong make Mineral fibre Ceiling Boards in true horizontal level suspended on inter locking Grid system made of Hot Dip Galvanized steel sections powder coated XL -15 mm as per manufacturers specification including making opening for electrical and air conditioning fitting complete as directed. The tiles and grid system FRAMEWORKXL-15 mm Main Runner of 3000mm spaced at 1200mm centre fixed to soffit by approved hangers at 1200mm distance. First and last hanger should not be at a distance more than 450mm from the adjacent wall.XL-15 mm 1200mm cross Tee to be interlocked between Main Runner at 600mm centre to form 1200x600mm module 600mmx600mm module to be formed by fixing XL-15mm 600mm Cross Tee between centre of 1200mm Cross Tees.19X19 mm Wall Angle to be secured to wall at 450mm centers Suspension to be done by using 2mm pre-straightened GI wire using anchor fasteners.Make - Armstrong - ANS Micro & Supra fine XL frame work. Note: Where RCC Slab is old and concrete is weal, the GI suspended channel shall be fixed with epoxy chemical and necessary load test to be carrid out before fixing Gypsum board fixing.Rate shall be inclusive of epoxy chemical and fixing of suspenders with chemical Sft 650.00 E STORAGE UNITS 1.0 Low Height Storage - Laminate finish Providing and fixing Medium height storage unit with shutter of size 900 mm high and 450 mm deep to detail comprising storage top out of 18mm thick BWR Plywood with 10 x 37 mm Steam beech moulding to shape along edges, 18mm thick com ply for top, sides, Two intermediates and bottom at 75mm level. Storage back 18mm thick com ply for side hung shutters with half round nosing laminated edge finish of required leaves with necessary, TW lipping, box type Hinges, SS Tower Bolts, Individual locking arrangements, ball magnetic catch, 150mm long SS Brush Finish handle etc., complete Sft 125.00 Full Height Storage - Laminate finish Providing and fixing Medium height storage unit with shutter of size 900 mm high and 450 mm deep to detail comprising storage top out of 18mm thick BWR ply with 10 x 37 mm Steam beech moulding to shape along edges, 18mm thick com ply for top, sides, Two intermediates and bottom at 75mm level. Storage back 18mm thick com ply for side hung shutters with half round nosing laminated edge finish of required leaves with necessary, TW lipping, box type Hinges, SS Tower Bolts, Individual locking arrangements, ball magnetic catch, 150mm long SS Brush Finish handle etc., complete Sft 100.00 SUB TOTAL VALUE OF STORAGE UNITS F PATCH FITTING DOORS/fixed Glass Glazing 1.0 Main Entrance & ATM Door and Aluminium Partion and Fixed Glazing To be made out of 12mm thk toughened glass with etching as per design.The glass with etching has to be fixed with top and bottom SS patch fittings of DORMA make as per design. The glass with etching has to be fixed with the fixed portion and Heavy duty floor spring of DORMA (or equivalent) make for the swing portion. The doors will also have 3 feet long SS H type handles for both the doors bothways. The entire work to be done as per the directions of the Architect. NB: Since patch fittings and floor springs is separate item need not quote for that. The above item includes handle, toughened glass, etching and fixing of door only. Sft 140.00 1.1 GENERAL 32MMTH FLUSH DOOR WITH BOTH SIDE LAMINATES WITH APPROVED MAKE OF COMMERCIAL PLYWOOD WITH HARDWARE FITTING ,WITH DOOR CLOSER ALL AS PER ARCHITECT DIRECTIONS. Nos 6.00 .... more in document
