Tender For Special Repair To Foot Path Including Road Furniture At Bg Under Ge 881 Ews; 1 Demolition of cement concrete (including floor tiles, kota stone flooring etc)(un-reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. 2 PCC (1:5:10), type E-2 using 40 mm graded stone aggregate in sub base, filling, mass concrete etc complete all as specified and directed. 3 25mm thick dry fine sandcoushioning under floor/hardstanding/foot path tilescomplete all as specified and directed. 4 Rubber moulded, Machine pressed precast concrete interlocking paver block any colour, shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade, with using grey cement and pigmentcomplete all as specified and directed. 5 Providing and laying at or near ground level factory made precast kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5 mm), including making drainage opening wherever required including necessary earth work and excavation complete all as specified and directed. 6 Preparation of concrete surfaces of any description and applying two coats of water based road marking paints over a coat of perimer of any colour complete all as specified and directed. 7 Manufacturing, supplying and fixing retro reflective Overhead informatory road signage and boards, of size exc 1.08Sqm and not exc 1.5Sqm each, made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTMD-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the Engineer-in-charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Drg shall be standard drg to be provided by Engineer in charge. 8 Solar cat eye aluminum alloy(100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc complete all as specified and directed. Make:- Dark Eye or its equivalent. 9 Metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including providing and embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.Make:- Dark Eye or its equivalent 10 Water filled barrier of model No. LTS‐WFB‐1650‐Water filled barrier, made of ROTO MOLDED LLDPE, red, white or yellow coloured of size 1500L X 500W X 1000H MM high reflective tape for night visibility water filling capacity75 ltrs complete all as specified and directed.Make:- Dark Eye or its equivalent 11 Convex mirror Model No. LTS‐CM‐CONVEX MIRRORS, Back Body -POLYCARBONATE, Mirror - UNBREAKABLE of Size - LTS‐CM‐80CM‐CONVEX MIRROR‐80CM with including 50mm dia MS pipe medium grade frame including necessary excavationwith and including PCC 1:2:4, type B-1 for foundation and painting of frame fixing arrangment etc and fixing as per manufacture instruction complete all as specified and directed by Engr-in-charge.Make:- Dark Eye or its equivalent 12 Providing and erecting a W metal beam crash barrier comprising of 3mm thick corrugated sheet metal beam rail, 70cm above road/ground level,fixed on ISMC series channelvertical post, 150x75x5mm spaced 2m centre to centre, 1.8m high, 1.1m belowground/road level ,all steel parts and fitments to begalvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5mm, 330mm long complete as per clause810,complete all as specified and directed.Make:- Dark Eye or its equivalent 13 Rubber speed breaker of size 500L X 400W X 50H mm, Model No. LTS‐RSB‐50MM-3-RUBBER SPEED BREAKERof make sloway or equvalent material madeup of ABS and fixing the speed breaker as per manufacturer instruction and all as complete as specified and directed.Make:- Dark Eye or its equivalent
