Tender For Upgradation/ Augmentation Of Water Supply To Batote Town Under Ut Capex Budget 4215- 1 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth asdirected: All kinds of soil : 2 Demolishing R.C.C. work manually/by mechanical means includingstacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. 3 Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures inrecommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improveworkability without impairing strength and durability as per direction of Engineer-in- charge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately.All works upto plinth level 4 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelCold twisted bars 5 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 6 Supply at site:Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shadeover a coat of primer (Priming & Painting to be paid for separately). 7 Providing, laying and fitting of G.I Pipes in trenches including all fitting material excluding the cost of pipes and earhwork 80 mm dia 8 Providing, laying and fitting of G.I Pipes in trenches including all fitting material excluding the cost of pipes and earhwork 65 mm dia 9 Providing, laying and fitting of G.I Pipes in trenches including all fitting material excluding the cost of pipes and earhwork 50 mm dia 10 Providing, laying and fitting of G.I Pipes in trenches including all fitting material excluding the cost of pipes and earhwork 40 mm dia 11 Providing, laying and fitting of G.I Pipes in trenches including all fitting material excluding the cost of pipes and earhwork 32 mm dia 12 Providing, laying and fitting of G.I Pipes in trenches including all fitting material excluding the cost of pipes and earhwork 25 mm dia 13 Providing, laying and fitting of G.I Pipes in trenches including all fitting material excluding the cost of pipes and earhwork 20 mm dia 14 Providing, laying and fitting of G.I Pipes in trenches including all fitting material excluding the cost of pipes and earhwork 15 mm dia 15 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, , lead upto 50 m and lift upto 1.5 m. 16 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete25 to 40 mm nominal bore 17 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete50 to 80 mm nominal bore 18 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)80 mm nominal bore 19 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)65 mm nominal bore 20 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)50 mm nominal bore 21 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)20 mm nominal bore 22 Carriage of Cement from source to site of work 500 Mtr by Manual Means 23 Carriage of Steel from source to site of work 500 Mtr by Manual Means 24 Carriage of Sand from source to site of work average 120 Km by Mechanical Transport and 500 Mtr by Manual Means. 25 Carriage of Stone aggregate 20 mm nominla size from source to site of work average 30 Km by Mechanical Means and 500 Mtrs by Manual Means. 26 Carriage of G.I Pipe from Jammu to Road side average 150 Km by Mechanical Transport 27 Carriage of G.I Pipe from Road side to site of work average 7000 m by Manual Means. Please Enable Macros to View BoQ information
