Tender For Ward No. 10, Mangire Mala Open Space To Mangwar Peth Road To Be Asphalted And Gutters To Be Constructed On Both Sides In Barshi.- 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift upto 1.5 metre)by Mechanical Means.. 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means Grading-I, using Screening Type-B (11.2 milimetre Aggregate). 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means Grading-II(Using Screening Type-B (11.2 milimetreAggregate). 4 Providing and applying tack coat on the prepared surface heating by flames in boiler and spraying bitumenset footed in bitumen boiler on Black Top surface at 2.50 Kilogram per 10 Square Metre using VG-30 grade bulk bitumen. 5 Providing and constructing 75 milimetre thick ModifiedPenetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 milimetre stone metal layers 100% crusher broken metal with conical crusher plant, heating and spraying thebitumen of VG-30 grade at 2 kilogram per square metre, spreading 12 milimetre size chips compacting with three wheel static roller having weight 8 to 10 metric tonne to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete including picking of existing WBM surface. 6 Providing and applying primer coat with bitumen emulsion on prepared surface of Granular Base including clearing of road surface and spraying primer at the rate of 0.60 kilogram/Square Metre using mechanical means. 7 Providing and Laying Open Graded premix surfacing20 milimetrethickness composed of 13.2 milimetreto 5.6 milimetre aggregates premixed with bituminous binder transported to site with Vehicle Tracking System, laid over a previously prepared surface, finished to the required grade, level, alignment and rolling to achieve the desired compaction, using VG-30 bulk bitumen, Drum Mix type hot mix plant with Superwisery Control and Data Acquisition, Paver and Vibratoryroller over Modified Penetration Macadam surface. 8 Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials & bitumen of VG-30 gradepreparing existing road surface, heating and applying bitumen at the rate 0.98 kilogram per square metre by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 metric tonne etc. complete. 9 Providing and laying Cast in situ/ Ready Mix cement concrete in Mix- 10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based Programmable Logic ControllerwithSuperwisery Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand V.S.I. Grade). 10 Providing and laying in situ/ Ready Mixcement concrete Mix-20of trap/ granite/quartzite/ gneissmetal for Reinforced Cement Concrete workin foundations like raft, strip foundations, grillage andfootings of Reinforced Cement Concrete columns and steel stanchions etc. including bailing out water, formwork, laying/ pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided, (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based Programmable Logic ControllerwithSuperwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mixplant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). 11 Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Pardi of required thickness including centering, formwork, cover blocks, laying/ pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic ControllerwithSuperwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mixplant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). 12 Providing and laying Cast in situ/ Ready Mix cement concrete Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Slabs and Landingsas per detailed designs and drawings including centering, formwork, cover blocks, laying/ pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic ControllerwithSuperwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mixplant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). 13 Providing and fixing in position Thermo Mechanically Treated (TMT) FE -500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 14 Providing and laying Weep Holes of 100 milimetre diameter Asbestos Cement / PolyVenylChloride pipes as per drawing for abutment returns, return walls etc. complete. 15 Providing and laying cement concrete pipe ofIndian Standard458:2003 non pressure-2 classof 450 milimetrediameterin proper line, level and slope including providingandfixing collars in cement mortar 1:2 complete.
