Tender For Job Work Of Ginning & Pressing (Non Modern) For Cotton Season 2025-26

Sharing tender

Tender For Job Work Of Ginning & Pressing (Non Modern) For Cotton Season 2025-26; 1 Ginning Machines 12 DRs of normal size / 11 extra-long DRs/ 9 Jumbo DRs. Available Not- Available 2 Kapas Conveyor System Mechanical / Pneumatic Conveyor with Stone Catcher from Heap to individual Gins. Available Not- Available 3 Lint Conveyor System Mechanical / Pneumatic Conveyor/ Palli or Bora System (Manual) any one from the following: (1)From Gin to Pala hall & subsequently from Pala Hall to Press by Mechanical / Pneumatic Conveyor or(ii) From Gin to Pala hall by Mechanical / Pneumatic Conveyor & subsequently from Pala Hall to Press by Palli or Bora System (Manual) or(iii)From Gin to Pala hall by Palli or Bora System(Manual)& subsequently from Pala Hall to Press by Mechanical / Pneumatic Conveyor or (iv)From Gin to Pala hall & subsequently from Pala Hall to Press or directly from Gin to Press hall by Palli or Bora System (Manual) Available Not- Available 4 Bale Press Single stage oil hydraulic, auto tramping Bale Press with Lint Slide and Pusher mechanism for direct feeding of lint into the press box. Conventional water hydraulic, two-stage presses without auto tramping facility will, however, be permitted if they already exist. Available Not- Available 5 Conveyor for Seed Automatic Conveyor from gins to Seed Platform Available Not- Available 6 Fire Fighting System Overhead tank/ sump/Borewell/Well (with adequate water storage capacity 65,000 liters) with a minimum of 6 hydrants strategically located, hose pipes with nozzles and a stand-by diesel pump besides an 7 Underground Wiring All high tension and low tension wires/cables to be under-ground Available Not- Available 8 Weigh Bridge Capacity: 20 tons/ 5 tons depending on local needs (Not required if the facility is available nearby) Available Not- Available 9 Pucca/ Platform for Kapas with 1 Hot Box (Hooper Storage Box) / Suction System Available 10 Not Available 0 2 Auto Feeder of kapas in ginning machine. Available 10 Not Available 0 3 Kapas Pre Cleaner More than 4 Roller 10 Up to 4 roller 5 4 Lint Cleaner More than 4 roller 10 Up to 4 roller 5 5 Fire detector & diverter system After Ginning Available 10 Not Available 0 6 Bales Pressing System Double Press 10 Single Press 5 7 Online Electronic Weighment System immediately after pressing of Bales Available 10 Not Available 0 8 Bale Storage Space (Platform area) More than 2500 Sqft Area 10 Up to 2500 Sqft Area 5 9 Star Rating 5 Star Rating 10 4 Star Rating 8 3 Star Rating 6 2 Star Rating 4 1 Star Rating 2 Not Available 0 10 Number of Hydrant with pipe size 6 Nos more than 2 inches 10 6 Nos upto 2 inches 5 11 Electrical Backup System for G&P work. Available 10 Not Available 0 12 CC Road Available 10 Not Available 0 13 Pucca Platform for kapas with shed Raised platform with a minimum of 5,000 Sq.ft.area. More than 5000 Sq ft 10 Upto 5000 Sq ft 0 14 Seed Platform with shed Raised platform of minimum of 1,000 Sq.ft.area. More than 1000 Sq ft 10 Upto 1000 Sq ft 0 shed. Raised platform with a minimum of 5,000 sq. ft. area. (If shed is not available, deduction shall be made as per the standard rate mentioned in Annexure-A) Available Not- Available 10 Seed Platform pucca with shed Raised, platform of minimum 1000 sq. ft. area. (If shed is not available, deduction shall be made as per the standard rate mentioned in Annexure-A) Available Not- Available 11 Bale Storage Space Pucca/Semi Pucca Platform adjoining Press Hall and admeasuring a minimum area of 600 sq. ft. Available Not- Available 12 Road Road with at least 10 ft. width. Available Not- Available 13 Boundary Wall/fence Wires mesh fence or barbed wire fence with less than 1 ft. gap between wires, or masonry wall, all of a minimum height of 6 ft. (If Wires mesh fence or barbed wire fence, deduction shall be made as per the standard rate mentioned in Annexure-A) Available Not- Available 14 CCTV cameras in G & P Factory at given locations with 6 month backup facility*. Location of CCTV Camera in G & P Factory:- 1. Factory Weighbridge 2. Path from Weigh Bridge to Factory entry gate. 3. Entry Gate. 4. Kapas Platform. 5. Gin Hall. 6. Press Hall 7. Exit gate. 8. Cotton Seed Platform *If CCTV is not available at the time of tender the G & P unit will have to ensure that the requirement is fulfilled before engagement of the factory.