Proposed Conservation And Repair Work To Ajagareshwar Baba Samadhi Temple, Tq.Dist.Nashik- 1 Removing grass, gazer grass and disposing off out of building premises including making clean the ground by shovel and phavaras etc. complete. 2 Providing and fixing double scaffolding system(cuplock type)on the exterior sideo f building/structure, including additional rows of scaffolding instepped manneras per requirement of site, madewith40mmdiaM.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes,M.S.tube challis,M.S.clampsandstaircasesysteminthescaffoldingforworkingplatformetc.and maintaining it inaserviceable condition for execution of work of cleaning and/or pointing and/orapplying chemical and removing itthereafter. Thes caffolding systemshallbestiffened withbracings,runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. 3 Providing and fixing Jute Kantan (Tarat) screen to the scaffold-ing for external guniting as directed including removing the same after the work is over etc. complete.SSR 2022-23Page No.298 Item No.46.38 4 Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete.S.S.R. 2022 - 23 Page No.211,Item No.32.33 5 Removing pointing and other epoxy-based hard material from joints and surface area of Basalt stone masonary manually with chisel and hammer or with the help of electric grinders wherever directed by Engineer In charge. Proper care should be taken not to damage the stone during removal. 6 Removing and resetting Mangalore tiles from roof including refixing loose battens etc. complete. S.S.R. 2022 - 23 Page No.235,Item No.38.24 7 Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete 8 Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. 9 Removing rafters from roof including the materials as directed with all leads, lifts etc. complete. 10 Removing planking from roof or ceiling and stacking them as directed with all leads and lifts etc. complete 11 RemovingG.I.orA.C.sheetroofingincluding purlins,principal raftersetc. includingsorting serviceableand unserviceable materials, stacking the same as and where directed inthe compoundincluding scaffoldingetc.complete. 12 Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete. 13 Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. 14 Dismantling stone masonry in lime or cement mortar including stacking the materials as directed with all leads, lifts etc. 15 Numbering the monument elements in proper order before lowering down with approved colour and shade as directed by Engineer in-charge, including ladder, scaffolding etc.complete.NON SSR R.A No.203 16 Lowering down carefully existing stone masonry of the monument manually in proper order including shifting the stone elements up to a distance of 50 meter beyond the monument area and stacking them as directed by Engineer in-charge, removing building rubbish and cleaning the site etc. complete .NON SSR R.A No.204 17 Specialised Stone cleaning to remove oil or emulsion paint,stains or dark patches,layers of impervious coatings,cementious layers,rust stains from surface of stone with chemicals ,thinners,solvents or soft teepol type soap solution or by pressure jet machine (As specified by consulting architect),A gentle use of air abrasive tools may be permitted as long as no damage to the original surface is ensured.it may include usage of mechanical tapping ,chemical surfactant or solvant,patent cleaning product or use of pressurised micro abrasive as necessary.test patches would need to be undertaken to asses efficeincy of technique prior to work.Removal to be followed by water washing.The surface shall finally be cleaned by hand rubbing and rinsing with clean water to obtain nearly original surface,colour and textureNON SSR R.A.34 18 Excavationforfoundationinearth,soilsofalltypessand,gravelandsoft murum,Includingremovingthe excavatedmatreialuptoadistanceof50Mbeyondthebuildingareastackingandspreadingasdirected, dewatering,preparingthebedforthefoundationandnecessarybackfilling,ramming,wateringIncluding shoring and strutting etc.complete ( Lift upto 1.50m )by manual means 19 Filling in plinth and floors with approved excavated material in 15cm. To 20cm.Layers including watering and compacting etc. complete. 20 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. SSR 2022-23Page No.157 Item No. 21.40 21 Providing and laying cast in situ 1:2:4 Lime Concrete of trap/ granite/ quartzite/ gneiss metal for foundation and bedding as per detailed specifications and drawings or as directed including bailing out water, centring, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required with fine aggregate, preparing the lime mortar in lime miller and then mixing with coursed aggregate in drum mixer as per specifications including bailing out water, watering etc. complete. 22 Providing Un-coursed Rubble Masonry of trap / granite stones in lime mortar 1:1½, in foundation and plinth as per detailed specifications and drawings or as directed including the stones to be set in the work as received from the quarry, after merely knocking offweak corners and edges with the masons hammer,the stones shall be carefully laid so as to break joints, no joint shall exceed 12.5 mm. (½″) in thickness, every stone shall be set flush in mortar, the face stone shall be for greater size, and good beds, one through stone shall be inserted at least every 0.80 sq. mete (1 square yard), the joints shall be racked out carefully at least 25 mm. (1″) where pointing or plastering tobe done, striking joints where no pointing or plastering is to be done, preparing the lime mortar in lime miller, bailing out water, watering and all exposed masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 23 Providingandfixing StonePaving, First Sortinlimemortar1:1,withsizeof stone0.45 mtx 0.30mt.x0.15 mt.,asperdetailedspecificationsanddrawingsorasdirectedincludingallstoneslabstoof approved quality, hard, even, sound, durable and uniform thickness, the stones to be very finely chisel-dressed on the surface and the course to be of prescribed width, the joints running true, the stones to be laid with joints not exceeding6 mm.(¼″)thickandtobeevenlyandfirmlybeddedflushinmortarontheconcreteandno hollow left, side to be dressed true and as per shape at least half the depth from the face, preparing the lime mortar in lime miller, watering and all paving work when handed over to be perfectly clean and free from all mortar stains etc. complete. 24 Providing and fixing Stone Paving, SecondSort in lime 1:1/2 mortar, with average size of stone 0.45 m. x 0.30 m. x 0.15m. as per detailed specifications and drawings or as directed including all stone slabs to of approved quality, hard, even, sound, durable and uniform thickness, the stones to be very finely chisel-dressed on the surface and the course to be of prescribed width, the joints running true, the stonestobelaidwithjointsnotexceeding 6mm.(¼″)thick andtobe evenlyandfirmly bedded flush in mortar on the concrete and no hollow left, side to be dressed true and as per shape at least half the depth from the face, preparing the lime mortar in lime miller, watering and all pavingwork when handed over to be perfectly clean and free from all mortar stains etc. complete.flooring for ghat and parking NON SSR R.A. No.151 25 Providing/Re-setting Ashlar Fine Stone Steps of reuse-stones in lime mortar 1:1 as per detailed specifications and drawings or as directed including each stone shall rest at least 3.8 cm. (1½″) on that below it, the beds or joints being in no case more than 3 mm. (⅛″), preparing the lime mortar in lime miller, watering and all steps work when handed over to be perfectly clean and free from all mortar stains etc. complete. NON SSR R.A No.62 26 Providing Ashlar Fine Stone Steps of trap / granite stones in lime mortar 1:1with size of stone 0.6m. x 0.400 m. x 0.220 m. as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, the stones shall be of exact size and shape, the shall be fine dressed on exposed surface, holes for balusters should be cut in the steps before they are laid, each stone shall rest at least 3.8 cm. (1½″) on that below it, the beds or joints being in no case more than 3 mm. (⅛″), preparing the lime mortar in lime miller, watering and all steps work when handed over to be perfectly clean and free from all mortar stains etc. complete. NON SSR R.A. No.61 27 Providing Ashlar Rough Tooled Masonry of trap / granite stones in lime mortar 1:1 with size of stone 0.60 m. x 0.45 m. x 0.23 m. in superstructure as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. NON SSR R.A. No15 28 Providing/Re-setting Ashlar Fine Masonry of reuse-stones in lime mortar 1:1 in superstructure as per detailed specifications and drawings or as directed including the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course, the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. NON SSR R.A No.12 29 Providing Ashlar Fine Masonry of trap / granite stones for Galtha in lime mortar 1:1 with average size of stone 0.30m. x 0.70m. x 0.30 m. in superstructure as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind,dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″)in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, wateringandall masonry work when handed over to be perfectly clean and free from all mortar stains etc. completeFor Stone curved shape chajjafor Temple. NON SSR 11 30 Providing Ashlar Fine Masonry of trap / granite stones for BRACKET in lime mortar 1:1 with average size of stone 0.70 m. x 0.70 m. x 0.30 m. in superstructure as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind,dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″)in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, wateringandall masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete NON SSR 11 31 Providing Ashlar Fine Masonry of trap / granite stones for Parapet in lime mortar 1:1 with average size of stone 0.60 m. x 0.60 m. x 0.45 m. in superstructure as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind,dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″)in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, wateringandall masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete NON SSR 11 32 Providing Semi-circular Coping Cut-stone Second Sort, 22.5 cm. (9″) height and 52.5 cm. (1ꞌ9″) wide of trap / granite stones in lime mortar 1:1½ with size of stone0.762 m. x 0.560m. x 0.2 m. as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, the stone shall be dressed full or to template, exposed face of the stones shall be fine rough tooled, semi-circular and all joints shall be in line and close and not more than 3 mm. (⅛″) thick, preparing the lime mortar in lime miller, scaffolding, watering and all coping work when handed over to be perfectly clean and free from all mortar stains etc. complete. NON SSR 59 33 Providing Soil Bag Support to the monument with contractor´s soil in proper layers carefully as directed by Engineer in-charge including filling, tying and conveying the bags, removing the soil bags after work up to a distance of 50 meter beyond the monument area and cleaning the site etc. complete. For Lowering Down 34 Providing Soil Bag Support to the monument with contractor´s soil in proper layers carefully as directed by Engineer in-charge including filling, tying and conveying the bags, removing the soil bags after work up to a distance of 50 meter beyond the monument area and cleaning the site etc. complete.For Restoring 35 Providing Brick Masonry Second Class in superstructure of first quality bricks of size 9″ x 4½″ x 2½″ in lime mortar 1:1½,asperdetailedspecificationsanddrawingsorasdirectedincludingthebrickstobeofuniformsize, moulded on tables, thoroughly well burnt and sound, ringing clearly when stuck with trowel, the bricks to be soaked in water for 12 hours before used, the bricks are to be laid flush in mortar in such bond as directed, as far as possible, bricks of uniform colour are to be selected for the face work when it is not to be plastered, the joints arenot toexceed9.5 mm.(⅜″), nobats or half brick tobe usedin thework, rackingout joints where pointing or plastering to be done, striking joints where no pointing or plastering is to be done, preparingthe lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 36 Providing Lime Pointing to stone work in lime mortar 1:1 in superstructure, as per detailed specifications and drawings or as directed including all face or visible work shall be pointed, unless otherwise specified and shall be done while the mortar is fresh, the mortar shall consists of lime and fine sand shall not be ground fine but sand should be finer, the joints of the pointed work shall be neatly defined by the pointing, the lines shall be regular and uniform in breadth and the joints shall be raised or flat as may directed, preparing the lime mortar with 640 gram pulp of wood apple (Belfruit) per cubic metre of lime mortar as a bonding material, scaffolding, watering andall workwhenhandedover tobeperfectlycleanandfreefromallmortar stainsetc.complete. 37 Carving ornamental work including moulding, grove, chisseling & dresing the same part with fine finishing as per existing/similar type of work of on the stone surface of any type & size or as directed by engineer in charge etc. complete. The charges for chisscling & dressing on stone surface for govering at the stone surface after chisling a fine surface rate for as per market rate. 38 Caving ornamental work on surface including moulding, grove, chisseling & dresing the same part with fine finishing as per existing/similar type of work of on the stone surface of any type & size or as directed by engineer in charge etc. complete.The charges for chiseling & dressing on stone surface for ornamental carving work surface etc. as per existing design. pattern and form as directed by engineer in charge Rates as per R.A. No. 29 39 Providing 12mm thick Rough Cast lime Plaster in single coat in lime mortar1.50:1 insuperstructure as per detailedspecifications anddrawings or as directedincludingall joints inmasonaryandbrickwork are tobe racked out to a depth of at atleast 20 mm and the wall to be washed with fresh water and thoroughly wetted for six hours before plastering,the plaster to be applied in an even and uniform coat well pressed in to the joints andtobewellbeatenfor11/2dayswithhandtappers,theplastershouldalsobewellsprinkleduringthe process of beating with mixture 1.10 kg jaggeryand 640 gram pulp of wood apple (Belfruit) in 90 to 135 litre of water the plaster being wetted occasionally with fresh water while beating is in progress all exposed angles and drawn neat clean and level soffits of arches must true arch of circle preparing the lime mortor in lime miller with 1.60 kg gugal (a king of fragnent gum) and 960 gram chopped hemp (fibre of bhendi or tag)per cubic meter of lime mortar as bonding material,of lime as a bonding material ,scaffolding watering and all work when handed over to be perfectely clean and free from all mortar stains etc complete 40 Providing10mm.thickRoughCastLimePlasterinsinglecoatinlimemortar1:1insuperstructure,asper detailedspecificationsanddrawingsorasdirectedincludingalljointsinmasonryandbrickworkaretobe racked out to a depth of at least 20 mm. and the wall to be washed with fresh water and thoroughly wetted for six hours before plastering, the plaster to be applied in an even and uniform coat well pressed in to the joints and to be well beaten for 1½ days with hand tappers, the plaster should also be well sprinkle during the proses of beating with a mixture of 1.10 kg Jaggary and 640 gram pulp of wood apple (Belfruit) in90 to135 litreof water, the plaster being wetted occasionally with fresh water while the beating is in progress, all exposed angles andjunctionswithdoorframetobecarefullyfinished,allmouldingsshallbeworkedtruetotemplateand drawn neat, clean and level, soffits of arches must true arch of circle, preparing the lime mortar in lime miller with1.60 kgGugal (akindof fragrant gum) and960 gramchoppedhemp(fibreof bhendior jute) percubic metre of lime mortar as a bonding material, of lime as a bonding material, scaffolding, watering and all work when handed over to be perfectly clean and free from all mortar stains etc. complete. 41 ProvidingFineCoatoflimeoverroughCastPlasterinsuperstructureasperdetailedspecificationsand drawings or as directed including all finishing Coat is to be applied overrough Cast Plaste and well polished with trowel,preparing lime mortar,Scaffolding,and watering complete 42 Providing and grouting the holes with Lime and Fine Screened Sand Slurry in proportion of (1:1)with proper jet pressure including Cleaning and Washing and Packing the existing Crack/Holes in the Brick or Stone masonary with lime and finesand paste in proportion of (1:1) properly from downside,filling the slurry in cracks or holes including all necesarry actions and required tools and machinaries,Scaffolding,Curing etc Complete. 43 Providing Ashlar Fine Masonry of trap / granite stones for TADKHADA(BASESTONE) in lime mortar 1:1 with average size of stone 0.60 m. x 0.60 m. x 0.60 m. in superstructure as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind,dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″)in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, wateringandall masonry work when handed over to be perfectly clean and free from all mortar stains etc. completeFor Stone curved shape chajja for Temple. NON SSR 11 44 Providing and fixing First Quality Indian T.W Column of size 0.24 m x 0.24m x 2.20 m for roofing/ floor including carving as per drawing or as directed and scaffolding if necessary etc. complete.It is mandatory to use first quality well seasoned Indian Teak Wood from Forest Departments FDCML 45 Providing and fixing First Quality Indian T.W beams and truss parts of size 0.240 m x 0.280 m x 2.20 m for roofing/ floorincluding scaffolding if necessary etc. complete.It is mandatory to use first quality well seasoned Indian Teak Wood from Forest Departments FDCML 46 Providing and fixing First Quality Indian T.W Purlin and Rafter of size 0.150m x 0.150m x 4.25 m for roofing/ floorincluding scaffolding if necessary etc. complete.It is mandatory to use first quality well seasoned Indian Teak Wood from Forest Departments FDCML 47 Providing and fixing Burma T.W Inclined support part of Truss of size 0.15 m x 0.15 m x 2.5 m for roofing/ floorincluding scaffolding if necessary etc. complete.It is mandatory to use first quality well seasoned Indian Teak Wood from Forest Departments FDCML 48 Providing and fixing Burma T.W Arches of size 0.15m x 0.381 m x 1.8 m for roofing/ floorincluding including carving as per drawing or as directed and scaffolding if necessary etc. complete.It is mandatory to use first quality well seasoned Indian Teak Wood from Forest Departments FDCML 49 Providing and fixing Burma T.W Bracket of size 0.15m x 0.15 m x 0.9 m for roofing/ floorincluding including carving as per drawing or as directed and scaffolding if necessary etc. complete.It is mandatory to use first quality well seasoned Indian Teak Wood from Forest Departments FDCML 50 Providing and fixing Indian teak wood eaves boards 15 cm wide and 25 mm thick plain decorative type including including carving as per drawing or as directedand scaffolding and painting with two coats etc. complete.It is mandatory to use first quality well seasoned Indian Teak Wood from Forest Departments FDCML 51 Providing and fixing Indian teakwood plank ceiling 20mm thick plain under side tongued and grooved including iron screws, scaffolding, if necessary, including one primercoaton under side and one coat of coal tar on upper side etc. complete.It is mandatory to use first quality well seasoned Indian Teak Wood from Forest Departments FDCML 52 Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side )profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre) 53 Providing and fixing Mangalore tiled roofing with class AA tiles including securing thelast course of tiles near the eaves with steel flat 40 mm x 3 mm and 1.22 mm wire fixingcountry teak wood sloping battens of 25 x 12 mm teak wood horizontal battens of50mm x 25mm over the slopping battens, all iron work and coal tarring the battens etc.complete (Excluding ridge and hip tiles) 54 Providing and fixing Mangalore tile ridge and hip tiles of class AA including scaffolding if necessary, pointing with coloured cement mortar and curing etc. complete. 55 Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete 56 Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete SSR 2022 - 23Page No.246 Item No.39.08 57 Providing and applying melamine polish of required finish to the wood work byspray machine including knotting and preparing the even surface by scraping,applying French polish , scaffolding if required etc. complete.Note:The work to be executed on prior approval of Superintending Engineer will be necessary. 58 Providingandlayingcastinsitu1:1:4LimeConcreteofbrokenbrickmetalforcopingor waterproofingasperdetailedspecificationsanddrawingsorasdirectedincludingcentring, formwork,laying/pumping,compacting,rougheningthemifspecialfinishistobeprovided, finishing if required, with fine aggregate, preparing the lime mortar in lime miller and then mixing withcoursedaggregateorsurkhi indrummixer,theconcretemustbebittenfortwodayswith pouring water as per specifications,scaffolding, wateringand all concrete work when handed over to be perfectly clean and free from all mortar stains, etc. complete. 59 Applying breathable, non-reactive, antifungal, and water repellant Silane/ Siloxane chemical as approved by Archaeological Survey of India/ Engineer-in- charge, of approved brand and manufacture, diluted withsolventmineral Turpentineoil in the ratio of 1:12 (One part of approved chemical :12 Part of Turpentine oil), on the existing sandstonemasonry surfacewith two or more coats to give uniform application of chemical onthe surface, all completeas per direction of Engineer-In-charge (The rate is inclusive of allmaterials& labours involved except scaffolding).Non - S.S.R. 60 Disposing of dismantling materials of R.C.C./ stone / brick masonry / derbies, excavated material / soil / murum/ rubbish material or vegetation / grass / shrubs etc., from work site beyond the 1 km. 61 Carrying of detailed topographic survey by using total station along the existing or new road including taking L-section and cross section at every 30 meter ROW ,taking at least 10 spot levels per cross section, picking up all existing details inside the Row like electric telephone line , encroachments, structures etc. connecting all the primary total station control points by G.I.S.Bench marks level or whichever available with department using auto level and preparing Auto CAD plan by using above data taking out 1 set of black and white printout on 50 micron polyster film sheet A2 size and 2 sets of coloured printout on A2 size submitting soft copy all data on CD. Plain Terrain New Alignment SSR 2022-23 Page No.17 Item No. 1.41 62 Public Seating Chair. - 3 Seater Providing and Fixing3seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. 63 Preparing and carrying out videography, Documentary & Shooting of still photographs of Extra copies - 5 X 7 Sizeoutdoor and indoor of roads, bridges, other structures and programme, including preliminarys survey, still shots moving shooting, necessary board for video shooting hiring of vehicle, equipment for video shooting, transportation of all equipment, persons, required for shooting, lighting arrangement as may be necessary, editing, mixing, titling, lettering, sounding including cost of coloured cassette of approved quality etc. completeNON SSR
