Tender For Work Is Pink Female Toilet Near Krishna Takiz Chowk Canra Bank Nbd. - Excavation in foundation by manual means in ordinary soil including lift upto 1.50 M, and lead upto 30 M and including filling watering and ramming of excavated earth into the trenches and removal and disposal of surplus as directed by the Engineer-in-charge upto a distance of 30 M from the foundation. 2 Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) including supply of all materials, labour T & P rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors. 3 M-150 brick work in 1:5Cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of work. 4 R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. including cost of binding wire. The rate excludes making of drip course which shall be paid extra. 5 R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. including cost of binding wire. The rate excludes making of drip course which shall be paid extra. 6 Mild steel or iron in plain work such as concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work. 7 2 Cm thick damp proof coarse cement and approved coarse 1:2 with and including water proofing material as ordered by Engineer-in-Charge in the proportion as specified by the manufacture including supply of all materials, labour and T&P etc. required for proper completion of the work and including proper curing & shuttering as necessary. 8 Painting on D.P.C. with two coat of air blown bitumen 80/50 @ about 1.7 kg/sqm including cost of fuel if any. 9 M-150 brick work in 1:5Cement and coarse sand mortar in Superstructureincluding necessary cutting and moulding of brick as requried thickness of wall & supply of all materials, labour and T&P etc. required for proper completion of work. 10 12 mm thick plaster with cement andapproved course sand in proportion 1:4 over brick work including supply of all materials,labour and T&P etc. required for proper completion of the work . 11 6 mm thickplaster On Ceiling of roof slab with cement andFine sand in proportion 1:3 over brick work including supply of all materials,labour and T&P etc. required for proper completion of the work . 12 White washing two coats including supply of all materials, labour and T&P etc. required for proper completion of the work. 13 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additive of required shade two or more coats applied @1.43 ltr/10 Sqm over including priming coat of exterior primer applied @ 0.90 litre/10 Sqm. including supply of all materials, labour and T&P etc. required for proper completion of the work. 14 Providing wall putty on New surface with approvel quality material of Berger/J.K./Birla or similar make 2 Coatsincluding supply of all materials, labour and T&P etc. required for proper completion of the work. 15 Supply & fixing 6 to 8 mm thick ivory or light shade vitrified tiles of 600 mm x600 mm size in flooring and skirting with 1:3 approved cement & coarse sand mortar finishing with in its cement colour slurry, jointed & polishing of approved quality complete including supply of all materials, labour T & P etc. required for proper completion of the work as per direction of Engineer-in-charge 16 2.5 Cm thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2 Cm Graded approved stone grit laid in panels finished with 3 MM floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and including 8 Cm thick base conrete consisting of cement fine sand of 1.25 fineness modulus and brick ballast 4 Cm gauge in the proportion of 1:4:8 and removing and any over lapping mortar add the joint of the panels if any and giving than uniform finishing including supply of all materials, labour andT&P etc. required for proper completion of work. 17 S/F Angle Iron Door Frame of size 40x40x6 MM Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a primer coat of approved steel primerincluding supply of all materials, labour and T&P etc. required for proper completion of work. 18 S/Fof 32 MM thick flush door commercial quality confirming to I.S. 2202 Part-I (1983) Includingfixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolt lock handle spring fitting with necessary screws to be suppliedincluding supply of all materials, labour and T&P etc. required for proper completion of work. 19 painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 Sqm over an under coat of primer applied @ 0.75 ltr/10 Sqm of approved brand and manufacture including supply of all materials, labour and T&P etc. required for proper completion of work. 20 P/F white vitoreous china pedestal type water closet squatting pan (Indian type W.C. Pan white vitreous china Orissa pattern W.C. Pan of size 580x440 MM with integral type foot rests) with 100MM sand cast Iron P or Strap,10 litre low level whiteP.V.C. flushing cisternwith manually controlled device (handle liver)confirming to I.S. 7231, with all fittingsincluding supply of all materials, labour and T&P etc. required for proper completion of work. 21 P/F white vitoreous china pedestal type water closet(Eurpean type ) with seal and lid, 10 litre low level whitevitreous china flushing& C.P. flush bend with fitting & C.I. bracket, 40 mm flush bend,including supply of all materials, labour and T&P etc. required for proper completion of work. 22 Providing and fixing white vetreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and One urinal basin with 5 litre white P.V.C. automatic flushing cistern. 23 Providing & fixing white vitreous china wash basin size 630x450 MM with C.I. brackets, 15 MM C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. 24 Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931 25 Providing & fixingP.V.C. waste pipe for wash basinincluding P.V.C.waste fittings complete including supply of all materials, labour and T&P etc. required for proper completion of work. 26 Providing & fixingC.P.Bib cock of approved quality confirming to IS8931 including supply of all materials, labour and T&P etc. required for proper completion of work. 27 Providing & fixingC.P.Brass stop cock (concealed) ofstandard design and of approved makeconfirming to IS8931 including supply of all materials, labour and T&P etc. required for proper completion of work. 28 Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 29 Providing and fixing stone slab with table rubbed edges rounded and polished of size 75x50 Cm deep and 1.8 Cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 as per direction of Engineer-in -Charge and finished smooth. 30 Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. 31 Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. 32 Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. 33 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 34 Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 35 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete. 36 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threading fitting and fixing the pipe with clamp at 1.00 M spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. 37 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threading fitting and fixing the pipe with clamp at 1.00 M spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. 38 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threading fitting and fixing the pipe with clamp at 1.00 M spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. 39 Providing and fixing gun metal gate valve with C.I. wheel of approved qualityincluding supply of all materials, labour and T&P etc. required for proper completion of work. 40 Providing, laying and jointing glazed stoneware pipes grade A with stiff mixture of cement mortar in theof 1:1 (1 Cement :1 fine sand0 including testing of joints etc. complete. 41 Providing and Fixing 63 MM P.V.C. Vent Pipe in Septic Tanksupply of all materials, labour and T&P etc. required for proper completion of work. 42 Supplying and fixingG.I. box alongwith modular base & cover plate of modular switches in recess etc. as required. 43 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10KA C curve, miniature circuit breaker suitable for inductive load of followingpoles in the existing M.C.B. DB complete with connection, testing and commissioning etc. required 44 Wiring for circuit/Submain wiring along with earth wire of FRLS PVC insulated copper conductor, single core cable in surface/recessed steel conduit as required. 45 Wiring for light point/ fan point/ exhaust fan point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS Box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 46 Cement Concrete with 2 Cm Gauge stne grit Coarse sand and cement in proportion 4:2:1 including supply of all materials, labour and T&P ec. Required for proper completion of work. 47 S/FHand rail of 60.30 mm outer dia of round hollow pipe thickness 2.90mm approved size by welding etc. to steel ladder railling, balcony, staircase railling and similar works including applying priming coat of approved steel primer including supply of all materials, labour and T&P etc. required for proper completion of work. 48 Providing and Fixing of Display Board Including Writing and supply of all materials, labour and T&P etc. required for proper completion of work. 49 ADD GST
