Repair/Renovation/Upgradation Of Dic Ganderbal- 1 Cement concrete flooring in 1:2:4 mix finished with a floating coat of neat cement all complete 2 P/F of wooden racks/almirahs made up of 19 mm ply boards including laminations with laminated teak/dull mica, beadings and all necessary fixtures and accessories 3 Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 4 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour 5 Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10sqm) sqm 160.25 6 Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) 7 Applying priming coat With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works 8 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work 9 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade on new work Two or more coats. 10 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shades, in skirting, riser of steps, laid with cement basedhigh polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm 11 P/F of steel racks 450 mm wide made up of steel framework/shelves of approved design as per requirements of the site 12 P/F of shutters for cabinets and vanity cabinets in 18 mm ply with o.8mm thick oolished / dull mica cladding on both sidesall complete 13 Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 andIS: 1285, fixing with dash fastener of required dia. and size including necessary filling up of gaps at junctionsi.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shallbe smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing /panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing,panelling and dash fasteners to be paid for separately.)For fixed portion Powder coated 14 Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters andpartition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination 15 Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness. 16 p/f of 1.5 ton capacity AC of approved make with all necessary fittings/fixtures. 17 Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: Providing, fabricating and supplying and fixing panels of aluminium composite panelcladding in pan shape in metallic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral coresandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF /Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts,washers, cleats, weather silicone sealant, backer rods etc. 18 P/F of 18 mm ply in frames for cabinets wardrobesincluding cutting sawing and placing in position incl. priming coat all complete 19 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessaryexcavation, leveling and dressing and finishing the top smooth and curing complete. 20 Electrification Providing and Fixing of Wiring of Lighting Point /Fan Point /Bell Point/Exhaust fan Points in 2x1.5 Sq. mm FR PVC Insulated Multistrand Copper wire of ISI Marked including 6 Amp Switch. 21 Providing and Fixing of Wiring for heating Points in 2x4 Sq. mm + 1x2.5 sqmm FR copper wire Multistrand of ISI Mark including 16-20 Amp switch socket with connection 22 Providing and Fixing of Wiring for Computer Point in 2x2.S Sq. mm + 1x1.5 FR PVC Insulated Multistrand Copper wire of ISI Mark. 23 Supply and Fixing of 150/250 mm Exhaust Fan Shutter Type Of ISI Mark Complete With Necessary Connections Complete Job 24 Supply and Fixing of Surface/recess 15 watt LED light including connection Complete job 25 Providing & Fixing of Double Door Distribution board 12 way of ISI Mark Recessed In Walls including Refacing of Walls. Complete Job 26 Supply and fixing of 6 – 10-16-20 amp Single pole MCB OF ISI Mark With necessary Connections. 27 Supply and fixing of 40 amp DP MCB ISImake With necessary Connections. 28 Supply and fixing of 63 ampDP MCB ISImake With necessary Connections. 29 Supplying Installation testing and commissioning of 32 amp industrial socket for AC. 30 Wiring for circuit 2x2.5+1x1.5 sqmm 31 Supply and lying of 7/16 sqmm copper conductor for service fan 32 Providing and fixing of sanitary fittings: a) ppr pipe isi marked 20 mm 33 b)Bib cockcp 15 mm 34 c)Angle valuecp 15 mm 35 d)pvcwater storage tank 36 e) Wall mixercp 15 mm
