Repair/Renovation Of Ep-307 At Wazarat Road, Jammu. Cno- 322 Np- 1 Labour for dismantling old fitting complete work. 2 plumber for one day 2 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm 3 Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. 4 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) 5 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):second class deodar wood 6 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).second class deodar wood ;35mm 7 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.12 mm thick Marine plywood conforming to IS: 710 8 Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mmfor doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction ofEngineer-in-charge :second class deodar wood 9 Providing and fixing 19mm mm thick ply including cutting,wastage, fevicol , carriage etccomplete item of superior make (green, century, amulya archird or equivalent) conforming BWP 710 10 Providing and fixing 1mm thick summica including cutting, wastage, fevicol, nail carriage etc(green, century) amulya virgo or equivalent 11 Providing and fixing nickel plated M.S. pipe curtain rods with nickel platedbrackets25 mm dia ( heavy type) 12 Providing and fixingbright finish door handle brass 8 long complete work 13 Providing and fixing magnetic catcher of approved quality in cupboard/wardrobe shutters including fixing with necessary screws etc. complete. Double strip (Horizontal type) 14 Providing and fixing door lock link, godrej or equivalent complete job 15 Renewing glass panes and re-fixing existing wooden fillets:Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) 16 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete . Size of tiles 600x600mm 17 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with whitecement and matching pigment etc., complete.In all colours, shades, except White, Ivory, Fume Red Brown 18 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shadesexcept burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointingin white cement mixed with pigment of matching shade complete. 19 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 20 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2mm thick 21 Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work 22 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat 23 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. 24 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirtesistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. 25 French spirit polishing, Two or more coats on new works including a coat of wood filler 26 2 carpenter for 3 days 27 1 Helper for 3 days 28 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Twoe or more coats on new work 29 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) after surface preparation, first layer of slurry of cement @ 0.488kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which willbe paid for separately) For the purpose of measurement the entire treated surface will be measured. 30 Cleaning of terrace/loft water storage tank (inside surface area) upto2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tankincluding marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tankshould be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 31 Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: 32 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) 33 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank 34 R.C.C work in walls etc. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate20 mm nominal size) 35 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete above plinth level: 36 Centering and shuttering including strutting, propping etc. and removal of form for: 37 Providing and fixing of PVC panellingof superior quality complete work 38 Providing and fixing bend mixerJaguar 29281 complete job 39 Providing and fixing basin mixer Jaguar 90238 complete job 40 Providing and fixing Hand Jet Jaguar 573 complete job 41 Providing and fixing Angle valve Jaguar 29053 complete work 42 Providing and fixing long nose bib cock Jaguar complete work 43 Providing and fixing sink mixer 20 long complete work 44 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 630x450 mm with asingle 15 mm C.P. brass pillar taps. 45 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 46 Providing and fixing looking glass mirror complete work 47 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:semi rigid pipe. 32 mm dia 48 Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes : 110mm dia 49 Providing and fixing aluminum die cast body tubular type universal hydraulicdoor closer (having brand logo with IS: 3564, embossed on the body, doorweight upto 35 kg and door width upto 700 mm), with necessary accessoriesand screws etc. complete : 50 Providing and fixing floor mankind one piece seat complete work 51 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. Thisincludes testing of joints complete as per direction of Engineer-incharge.PN-16 pipe , 20mm OD(SDR-7.4) 52 Providing and fixing wooden flooring complete work (Achon+ESA) 53 Site clearence after completeion of work by engaging labour complete job 54 Supply of good earth including spreading at lawn complete work
