|
| 1 | Demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortarcomplete all as specified and directed. |
| 2 | Demolition of RCC in precast cover slab anythicknes (reinforced)complete all as specified and directed. |
| 3 | Demolition of cement concrete in ground floors and pavings n exc 15cm below or above ground floorcomplete all as specified and directed. |
| 4 | Demolition of R. C. C. of any description and in any position etccomplete all as specified and directed. |
| 5 | Excavation over areas not exceeding 1.5 M deep and getting out in soft and loose soil complete all as specified and directed. |
| 6 | Excavation in trenches n exc 1.5 m widen exc 1.5 m deep in soft/ loose soil for foundation etcor for shaft, wells, manholes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out. complete all as specified and directed. |
| 7 | Removing excavated soil not exceeding 50 m distance and depositing where directed at alevel n exc 1.5 metre above the starting point . complete all as specified and directed. |
| 8 | Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soilcomplete all as specified and directed. |
| 9 | M & L for RCC. pipes 250 mm bore,Class NP2 laid, jointed and tested complete with collars including demolition and breaking up drain pipes (salt glazed ware)/ RCC pipe etcset in cement mortar of 150 mm bore pipe complete all as specified and directed |
| 10 | M&L for RCC 1:1.5:3, A1 typeusing 20 mm graded aggregate nominal mix in Foundations, including rafts, footings, foundation beams, plinth beamscomplete all as specified and directed. |
| 11 | M&Lfor RCC 1:1.5:3, A1 type using 20 mm graded aggregate nominal mix in Columns, pillars, piers, posts and strutscomplete all as specified and directed. |
| 12 | Formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work; verticle or to batter Rough finished surfaces of concrete flat complete all as specified and directed. |
| 13 | Formwork to sides of pillars, posts, struts, piers,columns, and stanchions Rough finished surfaces of concrete Square, rectangular or polygonal complete all as specified and directed. |
| 14 | M& L Cement concrete 1:4:8 Type D 2 (using 40 mm graded aggregate ,in foundations, filling and mass concrete complete all as specified and directed. |
| 15 | M &L Brickwork with subclass \"B\" old size bricks, straright or curved on plan exc 6m mean radius built in Cement mortar 1:6complete all as specified and directed. |
| 16 | All as per item no 15.00 as above but except brick. |
| 17 | M&L for providing precast cement concrete louvers and jallies 35 mm thick, Type B-0 (1:2:4)(12.5 mm graded aggregate) set in cement mortar (1:4), (Measured solid), including all mouldings including dismantling of existing jallies of any descriptioncomplete all as specified and directed. |
| 18 | M&L for preparing the new plastered surfaces and applying three coats of white wash on walls all as specified and direcrted. |
| 19 | Mild steel TMT bars10 mmdia and over cut tolength, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming tocomplete all as specified and directed. |
| 20 | M&L Mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips qualitycomplete all as specified and directed. |
| 21 | M & L for rendering 15mm thickcement plaster on wallin cement mortar 1:4on brick wall / Concrete surfaces offinishing the surfaces even and smoothetccomplete all as specified and directed. |
| 22 | M&L for PCCtype C-21:3:6 using40mm graded stone aggregate infoundation, filling and mass concrete complete all as specified. |
| 23 | M&L for walling of random rubble, brought up to course well bounded bedded and solidly hearted built in cm 1:4 complete all as specified. |
| 24 | All as per item No 23.00 as above but except stone |
| 25 | M&L for PCC (1:3:6) type C1 using 20mm graded stone aggregate as incopingand the like including weathering , slightly rounded or chamfered angle with and incl necessary use and waste of form work complete all as specified and directed. |
| 26 | Supply and fixed 18-20 mm thick GraniteSlab of any shade( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms, wall and likein cement mortor 1:4including pointing in whitecement 1:2 using pigment to match shade of the slabs etc including dismntalling of existinggrenite all as specified and directed. |
| 27 | M&L forRendering 15mm thick in CM (1:4) on Random Rubble stone masonrycomplete all as specified and directed. |
| 28 | M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in benching of draincomplete all as specified and directed. |
| 29 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds, mitered /stopped ends etccomplete all as specified and directed. |
| 30 | Add or deduct for each 25mm girth or part there of over or under 30 cmcomplete all as specified and directed. |
| 31 | M&L for precast RCC 1:1.5:3 type A-1 using 20 mm graded stone aggregate as in drain cover with plain fair faces including chambers, wathering, throating etc and setting in CM (1:4) complete all as specified. |
| 32 | Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flatcomplete all as specified and directed. |
| 33 | M&L for RCC Nominal Mix (1:1.5:3) type A-1 using 20 mm graded stone aggregate as in Beams, Cantilevers, bressummers, lintels over 1.5m span, coping / lintel band over wall complete all as specified. |
| 34 | M&L for coloured designer tiles exterior grade ( ENDURA or equivalent make as approved by GE) 10 mm thick as in flooring laid over and including 15 mm thick bed in CM(1:6) set, jointed and pointed in neat cement slurry with grey cement and pigmentincluding dismantling of floor, hearth tiles/ terrazo with cement mortar bedding (but not backing) complete all as specified and directed |
| 35 | M&L for Moorumfilling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled & rammed including watering complete all as specified and directed |
| 36 | M&L for machine pressed precast cement concrete coloured chemically treated interlocking paver block any shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigmentlaidover and including 40mm thick uniformly levelled surface ofstone dust cushioning including dismantling of floor tilescomplete all as specified and directed. |
| 37 | M&Lfor 75mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregates) as in sub base of floors complete all as specified and directed. |
