Tender For Repairing Of Existing Type Ii Quarters Situated At Old Colony, Loktak Project.
Tender Value
35.19 Lakhs
Estimated cost
Bid Submission
04 Nov 2025
0 days left
EMD
70000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
loktak → Manipur
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairing Of Existing Type Ii Quarters Situated At Old Colony, Loktak Project.
BOQ
| Sl. No. | Item Description |
| 1 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level.5.20.2 Thermo-Mechanically treated bar. |
| 2 | Centering and shuttering including strutting, propping etc. and removal of form for (5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 3 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level upto floor five level excluding cost of centering, shuttering, finishing and reinforcement 5.2.1 (1 cement: 1.5 coarse sand : 3 graded stone aggregate cum 20 mm nominal size). |
| 4 | Repairing to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints & preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead. 14.1.1) With cement mortar 1:4 (1 cement : 4 fine sand). |
| 5 | Neat cement punning. |
| 6 | Removing white or colour wash by scrapping and papering and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 7 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 8 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.13.63.3 with water thinnable cement primer on wall surface having VOC less than 50grams /litres. |
| 9 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade.13.43.1 Two or more coats on new work. |
| 10 | Finishing walls with water proofing cement paint of required shade.13.34.1 New work (Two or more coats applied @ 1.67 kg/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10sqm). |
| 11 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work. |
| 12 | Finishing with Epoxy Paint (Two or more coats) at all location prepared and as per manufacturer\" specifications including appropriate priming coat, preparation of surface of etc. complete. 13.39.2. On Concrete Work. |
| 13 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia. and length (hold fast lugs or dash fastener shall be paid for separately. 9.1.3) Local best quality Tolhao wood. |
| 14 | Providing & fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling or panelled or panelled and glazed shutters 25 mm to 40 mm thick: 9.5.1 Local best quality Teak wood. |
| 15 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :9.6.3 Float glass panes 9.6.3.1 4 mm thick glass panes. |
| 16 | Providing and fixing fly proof galvanised M.S. wire gauge to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete.9.25.1 With 2nd class teak wood beading 62X19 mm. |
| 17 | Providing and fixing IS: 12817 marked stainless steel butt hinges with steel screws etc. complete: 9.40.1) 125x64x1.9 mm. |
| 18 | Providing & fixing ISI Marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete. 9.38.1) 125mm. |
| 19 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete 9.36.1) 250x10mm. |
| 20 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with screws etc. complete 9.35.1) 300x16 mm. |
| 21 | Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete. 10.16.3 Electric resistance or induction butt welded tubes. |
| 22 | Add EPF @ 3.25% |
| 23 | Add CESS @ 1.00% |
| 24 | Add GST @ 18.00% |
AI Tender Summary
Tender Timeline
Oct 14, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 08, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender