Tender For Repair, Maintenance And Painting Of Officers Mess At Cs Hqr Crpf, Lucknow, Up; 1 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats 2 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade.Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. 3 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand preparing the surface smooth including necessary repairs to scratches etc. complete. 4 Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 5 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. 6 Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. 7 Providing and fixing floor mounted, white vitreous china single piece, double traps symphonic water closet of Approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes 9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes 10 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes 11 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer),with water absorption less than 0.08 % and conforming to 1.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm 12 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank ncluding marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 13 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore 14 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15 mm nominal bore 15 Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. 15 mm nominal bore 16 Painting (one or more coats) on rain water, soil waste and vent pipe sandfittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 100 mm diameter pipes 17 Providing and fixing Ist quality ceramic glazed wall tiles conforming to 1S: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 18 Supplying and fixing C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg 19 Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. 20 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe.32 mm dia 21 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe.40 mm dia 22 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 23 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms 24 Providing and fixing toilet paper holder : C.P. brass 25 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 26 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 200x10 mm 27 Providing and fixing bright finished brass handles with screws etc. complete: Providing 125 mm 28 Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete. 29 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. 30 Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. 31 Polishing on wood work with readymade wax polish of approved brand and manufacture : Old work 32 Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.(a) 15 mm nominal dia 33 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter 34 Providing & fixing of PVC Wall paper including removal of existing wall paper, cleaning the wall and making smooth and fixing with superior quality adhesive and all other surplus material including wastage for complete installation as per direction ofEngineer-in-charge: 35 Repair & replacement of modular kitchen items i.e.1- Providing and fixing of 18 mm thick marble work 2.23 sqm with special adhesive including pointing in white cement, 18 mm thick granite work 1.86 sqm with spcial adhesive including pointing in white cement, wall tiles work 9.20 sqm with cement morter 1:3 including pointing in white cement as per direction of Engineer in charge. 2- Providing & fixing 01 No. faucet jonson wall mounted mixer, 01 Nos. double bowl with drain sheet sink 46x18 franking, 01 No. Teresa 90 plus (90cm wall mounted filter free hood) 258 W motor power, 3 speed control wall mounted chimney, 01 nos. ALTIUS FS390(86 cm build in fully sealed gas hob) gas chulha as per direction of Engineer in charge. 3- providing & repairing of modular kitchen cabinets, drawers with bottle, pullout 200mm Anthracite 02, Blind corner hinges blum 04 nos., SS Hinges for sink area Hafele 04 Nos., Zero degree hinges soft close Hafele 40 nos., Telescopic runner 20 inch soft close 05 nos. as per direction of Engineer in charge. 36 Renewal of EPDM rubber/Neoprene gasket complete i/c dismantling & assembling of aluminium window as per direction of Engineer-in-charge complete. 37 Providing & fixing of PVC Louvers wall panel with adhesive includingcleaning the wall and making smooth and fixing with superior quality adhesive and all other surplus material including wastage for complete installation as per direction of Engineer-in-charge: 38 Wiring for light point/Fan point/Exhaust fan/Call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core in surface/recessed steel conduit, with modular switch, modular plate, suitable GI Box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc at required. Group A 39 Supplying & fixing call bell/buzzer suitable for single phase, 230 V complete as required 40 Supplying and fixing following sizes/modules, GI Box alongwith modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75 mm x 75 mm) 41 Supplying and fixing following sizes/modules, GI Box alongwith modular base & cover plate for modular switches in recess etc as required. 4 Module (125 mm x 75 mm) 42 Supplying and fixing following sizes/modules, GI Box alongwith modular base & cover plate for modular switches in recess etc as required. 8 Module (125 mm x 125 mm) 43 Supplying & fixing following modular switch/socket on the existing modular plate & switch box including connection but excluding modular plate etc. as required. 5/6 A switch 44 Supplying & fixing following modular switch/socket on the existing modular plate & switch box including connection but excluding modular plate etc. as required. 15/16 A switch 45 Supplying & fixing following modular switch/socket on the existing modular plate & switch box including connection but excluding modular plate etc. as required. 3pin 5/6A socket outlet 46 Supplying & fixing following modular switch/socket on the existing modular plate & switch box including connection but excluding modular plate etc. as required. 6pin 15/16A socket outlet 47 Supplying & fixing following modular switch/socket on the existing modular plate & switch box including connection but excluding modular plate etc. as required. Bell push 48 Providing & fixing LED 06 Watt round False ceiling panel light 49 Providing & fixing LED panel light round 20 watt 220 mm 50 Providing & fixing Fountain and pools 06 LED 18 Watt full SS Spot fountain water proof light
