Tender For Providing Amenities & Parking Near Conference Hall At Red Fort, Delhi; 1 Civil Work 2 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. - All kinds of soil 3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 4 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge. 16.91.1 60 mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. 5 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:- Cement mortar 1:4 (1 cement : 4 coarse sand) 6 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) 7 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone- III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) 8 Stone work (cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :Red sand stone - exposed face fine dressed with rough backing : 40mm thick 9 Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade.- Red sand stone 10 Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately):12.31.1 Flat surfaces 11 Diluting and injecting chemical emulsion for POST- CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: 2.35.3.1 With chlorpyriphos/Lindane E.C. 20% with 1% concentration 12 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 13 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level : Mild steel and Medium Tensile steel bars 14 Centering and shuttering including strutting, propping etc. and removal of form work for :Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets,, slab, kerbs and steps etc. 15 Providing and fixing decorative focus lights as per archetectual design 16 Providing and fixing LED strip on top of pelmet for possine lighting in hall with 240 LED per meter 17 Cement plaster (1:3) finished with a floating coat of neat cement : 20 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) 18 Providing and fixing PVC 4 thick waste pipe from bathroom to septic tank 19 Providing and laying of 60 mm thick red sand stone over DG foundation & drain for cover the area etc complete. 20 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 21 Providing and laying pillar tap long body for counter top wash basin 22 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 23 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. completeat all levels.8.2.2 Granite stone slab colour black, Cherry/Ruby red 24 Providing and fixing Sony VPC Px251 laser projection 5800 lunar full HD WUXGA, 4Kj with 3 year warrenty 25 Providing and fixing 150 Inch diagonal screen for projector (11x6 ft) height gain 1:2 ratio designed to enhance brightness, aspect ration 16:09 motorised with remote and one year warrenty 26 Providing and fixing Korean table top of 12mm thick Henax-Hyundai 27 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 28 Finishing walls with Acrylic Smooth exterior paint of required shade : 13.111.1 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface 29 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 30 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. 31 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 32 Provision for providing and fixing of XPM wire mass jaali to potect ventilation and stop the entry of birds inside the upper most hut shap hollow portion including material & labour charges etc complete. 33 Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondaryintermediate cross-T of size 24x32 mm of length 600 mm to formgrid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6 mm thick with precut hole on both 25 mm flange to pierce into 12x50 mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directionsof the Engineer-in-Charge. 26.22.1 With 15 mm thick Tegular edged light weight calcium sliciate false ceiling tiles 34 Providing and fixing 2 handheld, 1 Lapel table top, one collar mounted studio master x R100 wireless microphone system etc complete. 35 Providing and fixing 2 Way ceiling speaker with all fitting (Ahuja Brand) etc complete. 36 Providing and fixing 2 in x4 out HDMI splitter with audio out Lintek brand 37 Providing and fixing HDMI extender over CAT 6 , 70 mtr length 38 Providing and fixing HDMI cable ethernet copper 10m long lintek brand 39 Providing and fixing 2-RCA mono audio cable 1.80m etc complete. 40 Providing and fixing Mono to mono audio cable 1.80 etc complete 41 Providing and fixing D link CAT-6 networking cable 305 mtr etc complete. 42 Providing and fixing 20 mtr mic extention cable etc complete. 43 Providing and fixing TP Link Deco M4 dual band mesh wi-fi system (AC 1200), speed 1200 MBPS etc complete. 44 Providing and fixing of Red Sand stone signanges for engraving stone of sangeeti including material & labour charges etc complete. 45 Providing and fixing conference hall display units in side wall (52 inch) (Sony/Samsung or equi. Similar to existing) complete 46 Providing and fixing internet jack, USB port, HDMI jack of each socket in conference hall incluidng wiring of connect each panel for jack & port including all fiiting as per direction higher authorities etc complete.. 47 Providing and fixing brass fittings of 8 handle of 2 nos, 12 decorative handle of 2 nos., 24 tower bolt of 6 nos, Kundi with all fittiing 3 Nos. in panelled doors etc complete. 48 Providing and fixing of Emblem of ASI Logo in brass size2.50 x 2.00 etc complete. 49 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 9.1.1 Second class teak wood 50 12 mm thick one side Pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade -1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS: 848 and pre-laminated conforming to IS : 12823, Grade-1, Type II marked 51 Providing and fixing laminated wooden flooring 8 mm thickness imported brand egger or eq, quality castle AC 4 etc complete. 52 Labour charges for installation of LED screen 95 inch on wall in conference hall including all transportation from HQ to Red Fort& material for fixing etc complete. 53 Removal of malba/earth/mud/rubbish from the area of CPM BARRACK or here & there area and carry the debris from entrance of Delhi Gate towards dumping ground of parking area for day hours, after that stacking the malba of back side area of T-5 parking and removal by manually/mechanical transportation upto dumping ground lead 10 to 15 km (approx) in night hours 54 Providing and fixing PVC Vinyl flooring 2 to 3 mm thickness including labour & material charges etc complete. 55 Provision for repairing work of wooden doors, window & ventilation at NBCC office & others including labour & material charges etc complete. 56 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps andM.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item tobe done.
