Bids Are invited for igh Back Revolving Chair The seat & back is made up of 1.2 ± 0.1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18 upholstered with knitted fabric ,over moulded High Resilience Polyurethane foam.BACK SIZE: 51.8 cm. (W) x 75.2 cm. (H).SEAT SIZE : 49.0 cm. (W) x 51.4 cm. (D).The HR polyurethane foam is moulded with density = 55+/-2 kg/m³ and hardness 16 ± 2 kgf as per IS:7888 for 25% compression.The adjustable armrest is designed with the following features :Up-Down adjustment– 8 steps (8.0±0.5 cm range).Height adjustable armrest structure which is powder coated & fitted with an armrest top.Fixed Armrest Top is PU molded over metal insert.The adjustable tilting mechanism is designed with the following features.360° revolving type.Single point control.Front-pivot for tilt with feet resting on ground ensuring more comfort.Tilt tension adjustment.4-position locking with anti-shock feature.Seat/back tilting ratio of 1:2.Back can be adjusted in 5 positions by manually.Stroke of height adjustable spine is 7 cm. Back height adjustability is applicable for for High back and Mid back chair.The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm.The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia is Ø66.1 ± 0.5 cm. (76.1 ± 1.0 cm. with castors).The twin wheel castors are injection moulded in black Nylon. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre. 17 2 Mid Back Revolving Chair The seat & back is made up of 1.2 ± 0.1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18 upholstered with knitted fabric ,over moulded High Resilience Polyurethane foam.BACK SIZE: 51.8 cm. (W) x 65.7 cm. (H).SEAT SIZE : 49.0 cm. (W) x 51.4 cm. (D).The HR polyurethane foam is moulded with density = 55+/-2 kg/m³ and hardness 16 ± 2 kgf as per IS:7888 for 25% compression.The adjustable armrest is designed with the following features :Up-Down adjustment– 8 steps (8.0±0.5 cm range).Height adjustable armrest structure which is powder coated & fitted with an armrest top.Fixed Armrest Top is PU molded over metal insert.The adjustable tilting mechanism is designed with the following features.360° revolving type.Single point control.Front-pivot for tilt with feet resting on ground ensuring more comfort.Tilt tension adjustment.4-position locking with anti-shock feature.Seat/back tilting ratio of 1:2.Back can be adjusted in 5 positions by manually.Stroke of height adjustable spine is 7 cm. Back height adjustability is applicable for for High back and Mid back chair.The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm.The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia is Ø66.1 ± 0.5 cm. (76.1 ± 1.0 cm. with castors).The twin wheel castors are injection moulded in black Nylon. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre. 47 3 Visitor Chair The seat & back is made up of 1.2 ± 0.1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18 upholstered with knitted fabric ,over moulded High Resilience Polyurethane foam.BACK SIZE: 51.8 cm. (W) x 65.7 cm. (H).SEAT SIZE : 49.0 cm. (W) x 51.4 cm. (D).The HR polyurethane foam is moulded with density = 55+/-2 kg/m³ and hardness 16 ± 2 kgf as per IS:7888 for 25% compression.The tubular frame is powder coated ( DFT 40-60 microns ) cantilever structure & made of Dia.Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. Tube with a connecting M.S. Spine welded to it. Back spine is fitted to the frame assembly. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre. 39 4 3 Seater with Arm The seat shell is a welded assembly of seat,back and side frame.The seat and back are made of 0.12 ± 0.013 cm thk CR steel sheet with oblong perforations.They are welded to sideframe of size 3.2 ± 0.05 cm x 0.5 ± 0.05 cm thk HR steel.The welded assembly is powder coated.The seat has a front water fall edge to provide popliteal clearance for comfortable seating.It also has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back.Clean and flat surfaces of seat and back aids in easy maintenance.Sear size:47.8 cm (W) x 44.6 cm (D).Back size:41.6 cm (W) x 23.0 cm (H).Understructure assembly consists of connecting beam and leg assembly made of M.S. E.R.W. oblong tube of size 7.5 ± 0.03 cm x 0.2 ± 0.016 cm thk.The welded structure assembly is powder coated.The leg assembly is fitted with shoes and levellers in nylon.The leg structure is designed with minimal area of contact close to ground providing easy access for cleaning purposes.The shoes fitted to leg assembly help in aligning the structure for back to back arrangements.Levellers take care of uneven flooring.Connecting beam is fitted with snap locking end cap.It also aids in side-by-side understructure alignment.Armrest assembly consists of armrest frame and armrest pad.The armrest frame is made up of size 3.175 ± 0.05 cm x 0.47 ± 0.027 cm thk HR steel and it is powder coated.Armrest pad is injection molded in nylon and is fitted onto the armrest frame. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates wi 5 Steel filing Cabinet Models & Product Size:4 Drawer Width: 470mm Height: 1320mm Depth: 620mm.Construction:Rigid Knock Down Construction.Material:CRCA 0.6mm Thickness.Drawer front:Easy to grip Full length Handle recess integrated into Metal Drawer fronts.Drawer Size & Files type:For hanging ‘Ezee’ / ‘Visa’ files (Foolscap) from front to back (Files Along the Width).No. of 20 mm thk file which can be hanged in above way per drawer is 28.Locking & anti-tipping arrangement:Centralized locking with 10 lever Cam Lock & having anti-tipping arrangement to ensure that when one drawer is opened for use, it does not allow other drawers to be opened.Slide:High quality precision ball slide. Tested for 30 kg. UDL for 75,000 cycles (BIFMA cyclic test).Finish:Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre. Total Quantity : 125
