Proposed Furniture Sub Work Of Panchayat Samiti, Shrirampur Adm.Building Tal. Shrirampur Dist -Ahilyanagar- 1 Executive Table:--Executive Table @ 2250Lx2100Dx750HT including Low Height Credestal @ 1200Lx450Dx650HT Providing & Fixing of Table@ 2250Lx2100Dx750HT TOP & GABLE END to be made ofMembrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18 mm thick Prelaminated particle board with PVC edge band. INCLUDING CREDESTAL @ 1200L X 450D X 650H:- To be made out of Membrane Finish ( 2 Openable Shutter & 3 Drawer Pedestal in between ) as per drawing (SSR 22-23ITEM NO 51.24 PAGE NO 355 ) 2 H.O.D. Table:-- ExecutivesTable @ 1800Lx900Dx750HT Providing & Fixing of Table @ 1800Lx900Dx750HT - TOP & GABLE END to be made ofMembrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18 mm thick Prelaminated particle board with PVC edge (SSR 22-23ITEM NO 51.21 PAGE NO 355 ) 3 SideTable -Credestal @ 1200Lx450Lx650HT Providing & Fixing of LOW HEIGHT CREDESTAL @ 1200L X 450D X 650H:- To be made out of Membrane Finish ( 2 Openable Shutter & 3 Drawer Pedestal in between )as per drawing. (SSR 22-23ITEM NO 51.23 PAGE NO 355 ) 4 CABIN Tables:--- Free Standing Table @ 1500Lx600Dx750HTProviding and fixing Table of Size 1500 x 600 x 750 mm. Top: made from 25 mm Prelaminated Particle board.All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine.Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :-Metal Powder Coated - Black Color, CPU TROLLEY :-Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board,(SSR 22-23ITEM NO 51.26 PAGE NO 356 ) 5 Staff Tables:---Free Standing Table @ 1200Lx600Dx750HTProviding and fixing Table of Size 1200 x 600 x 750 mm. Top: made from 25 mm Prelaminated Particle board.All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine.Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :-Metal Powder Coated - Black Color, CPU TROLLEY :-Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board,(SSR 22-23ITEM NO 51.28 PAGE NO 357 ) 6 Partition :--Medium Height Partition @ 1800/1200HT TILE BASED PARTITION SYSTEMTile based Aluminum partition system of 1800/1200mm ht. made of 60mm thick aluminum frames having two separate race ways for laying electrical & computer wiring. The wire management shall be through to the race way to be fitted at bottom of partition other immediately below of work top with hook on type raceway cover for easy access of wires. Frames to be joined by aluminum connectors with M6 x 16 pan-head machine screw and washer with aluminum post cover. Post cover snap on fashion to be connected on aluminum connector visible aluminium to be in anodized / powdercoated finish. The top exposed sides of the frame and posts should be covered with horizontal/ Vertical trim and caps made of Aluminum in anodized / powdercoated finish in order to enhance its look.Upper tiles on the partition to be in Soft Board or Marker or prelaminated partical board tile of 9mm. thk., prelaminated partical board lower tiles in laminate finish 9mm. thk. on both the sides .Size :- 1200/1800mm (H) (SSR 22-23ITEM NO 52.48 PAGE NO 446 ) 7 Accoustic Panelling :--Providing & Fixing in position, Acoustical Panelling made from Wood-wool board 20mmon, 50 x 50 mm Sal-wood frame of 600 x 600 c to c having wooden supports from wall of required length, in front of 1000 Gsm synthetic wool 50 mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects. including all materials labour,finishing etc complete. (SSR 22-23ITEM NO 51.02 PAGE NO 352 ) 8 Meetinghall table :--Conference Table @ 3600Lx1400Dx750HTProviding & Fixing of Main Table @ 3600Lx1400Dx750HT - made up of 18+18mm Thick MDF top with PVC Membrane finish and waterfall edge profile. Aluminium Anodizied finish beeding of 4mm thich is running all over the table top edge. Gable ends is Aerofoiled Shape with front edges in PVC Membrane finish and rest in Prelaminated MDF with batton structure. Gable ends should be hollow from inside for the provision of passing electrical and Data wiring. , MODESTY PANEL:- to be made of 18 mm thick Prelaminated particle board with PVC edge band Access Flap:- For Wire manager 2 Nos. (SSR 22-23ITEM NO 51.31 PAGE NO 357 ) 9 Storage:---Full Height Steel Storage @ 750Lx450Dx2100HTProviding and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in0.8 mm thick & Topin 2 mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. (SSR 22-23ITEM NO 51.37 PAGE NO 359 ) 10 Executive chair:---Providing & Arrangemnt of High Back, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Basewith Leatherite Upholstery (SSR 22-23ITEM NO 51.40 PAGE NO 359 ) 11 Cabin chair:---Providing & Arrangemnt of MId Back, Normal SyncroMechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery (SSR 22-23ITEM NO 51.42 PAGE NO 359 ) 12 chair :---Providing & Arrangemnt of MId Back, Normal SyncroMechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery (SSR 22-23ITEM NO 51.43 PAGE NO 359 ) 13 Sofa Set 3+1+1:--- Sofa Set 3+1+1Providing & fixingSofa Set 3+1+1 Brown and Cream leather DIMENSION Length: 182.5 (cms)Breadth (cms): 100 (cms)Height (cms): 100 (cms) Weight (Kilograms): 66 (Kilogram) Seating Capacity: Five Seat(SSR 22-23ITEM NO 51.53 PAGE NO 366 ) 14 Tea table :---Tea Table 900mm X 750mm X 450mm for m.s. ante chamber Providing And Fixing Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made OutOf 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc. (SSR 22-23ITEM NO 51.54 PAGE NO 366 ) 15 Public seating chair :--Public Seating Chair. - 3 SeaterProviding and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. (SSR 22-23ITEM NO 51.44 PAGE NO 359 ) 16 RollarBlinds:---Providing and Fixing Rollar Blinds AMI Make or approved make & shade of 38mm round Aluminium channel with Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work)(SSR 22-23ITEM NO 51.19 PAGE NO 355 ) 17 Gypsum false ceiling :---ProvidingandfixinginpositionGypsum boardfalseceilingwith12.5mm thickGypsum boards, screwed/fixedtotheunderstructureofsuspendedG.I.Gridconstructedand suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum centertocenterdistanceof600milimetreperimeterchannelandintermediatechannelsat maximumcentertocenterdistance1200milimetregalvanizedgridshouldbefixedto reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws.The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels.Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed inall respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. (SSR 22-23ITEM NO 38.51 PAGE NO 243 ) 18 carpet:---Providing & Fixing in position, Carpetmore than 800+ gsm, made with100% stain proof fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspectsincluding all materials labour,finishing etc complete.(SSR 22-23ITEM NO 51.13 PAGE NO 243 ) 19 Double Faced Mobile Unit for Compactor --Double Faced Mobile Unit for Compactor 2150mmH x 2745mmW x 900mmDProviding and fixing Double Faced Mobile Unit for Compactor 2150mmH x 2745mmW x 900mmD -BASEFRAME:BaseFrameshallbefabricatedinchannelTypefrom minimum 2.5 mm thick MS Sheet Size ofChannel25mm x 100mmx 45mm.GUIDE RAILS : The guide rails shall be made out of 28mm Bright bar placed on 1.2 mm thickM.S. Plate which will be above the floor and are as per the international standard of safety. SUPERSTRUCTURE:SuperstructureoftheMobilestoragesystemwillconsistof knockdowntypepanels. Allthecomponentssuchasshelves,frontpanel,endpanel, verticalrearpanel,centralpartitionetc.WillactasanintegralmemberoftheUnit. SHELVES : Shelves made of 22SWG thick Prime Quality C.R.C.A. having 10folds each will be providedeach designed to carry a U.D.L. of 70 Kilograms. VERTICAL PANEL : Vertical panel consists of the front, Centre & rear panel shall be made out of 20SWG thick C.R.C.A.PrimequalityMildSteel&designedtotaketheloadofshelves.DRIVE COVER PANEL : Made out of 22SWG thick C. R.C. A. prime quality Steel to cover the entire drive mechanism. CENTRE PARTITION : The Centre partition will comprise of a fullC.R.C.A.primequalityMildSteel22SWGSheet.LOCKING : Systemwillbe provided with individual rack locking as well as centralised locking arrangement onthe last unit when all units are brought together,central lock when operated gets locked with thefloor&doesnotallowaccesstotheunits.DRIVEMECHANISM : Driving Mechanismwill be provided externally supported on special grade anti-friction bearing to havesmooth&effortlessmovement.Entiremechanismorgear&sprocketsshallbe incorporatedwithinthefrontpanelprovidedinthefrontoftheunitwithinanareaof 1000mm x 200mm x 60mm. DRIVING WHEEL : Fully Powder Coated three pronged drive wheel for better torque & free movement of the rack over the guide rail. INDEXING ARRANGEMENT : Acryliccard holders provided on thefront panelforeasy identification&retrieval.FINALFINISH:PowderCoating(8tanksprocesswith70 microns). 20 Single Faced Mobile Unit for Compacto -- Single Faced Mobile Unit for Compactor 2150mmH x 2745mmW x 457mmD ProvidingandfixingSingleFacedMobileUnitforCompactor2150mmHx2745mmWx457mmD-BASEFRAME : BaseFrame shall be fabricated in channel Type from minimum2.5mmthickMSSheetSizeofChannel 25mmx100mmx45mm.GUIDE RAILS:Theguiderailsshallbemadeoutof28mmBrightbarplacedon1.2mmthick S.Platewhichwillbeabovethefloorandareaspertheinternationalstandardofsafety. SUPERSTRUCTURE : Super structureof theMobile storage systemwill consist of knockdown typepanels. All thecomponents suchas shelves, front panel, endpanel, vertical rear panel, central partition etc.Will act as an integralmember of theUnit. SHELVES:Shelvesmadeof22SWGthickPrimeQualityC.R.C.A.having10 foldseach willbeprovided eachdesignedtocarryaU.D.L.of70Kilograms.VERTICALPANEL: Verticalpanelconsistsofthefront,Centre&rearpanelshallbemadeoutof20SWGthick C.R.C.A. Prime qualityMildSteel&designed to take the load of shelves. DRIVE COVERPANEL:Madeoutof22SWGthickC.R.C.A.primequalitySteel tocover the entiredrivemechanism.CENTREPARTITION:TheCentrepartitionwillcompriseofa fullC.R.C.A. primequalityMildSteel 22SWGSheet. LOCKING : Systemwill be providedwithindividual racklockingaswellascentralisedlocking arrangementonthe lastunitwhenallunitsarebrought together, central lockwhenoperatedgetslockedwith the floor&does not allowaccess to the units. DRIVEMECHANISM: Driving Mechanismwillbeprovidedexternallysupportedonspecialgradeanti-frictionbearingto have smooth&effortlessmovement. Entiremechanismor gear&sprockets shall be incorporatedwithin the front panel provided in the front of theunitwithinanareaof 1000mmx200mmx60mm. DRIVINGWHEEL:FullyPowderCoatedthreepronged drivewheelforbettertorque&freemovementoftherackovertheguiderail. INDEXING ARRANGEMENT : Acrylic card holders provided on the front panel for easy identification&retrieval. FINALFINISH: PowderCoating (8 tanksprocesswith70 microns) (SSR 22-23ITEM NO 51.46 PAGE NO 361 ) 21 Single Faced Fixed Unit for Compactor -- Single Faced Fixed Unit for Compactor 2150mmH x 2745mmW x 457mmD Providing and fixing SingleFaced Fixed Unit for Compactor 2150mm H x 2745mm W x 457mmD- BASEFRAME : Base Frame shall be fabricated in channel Type from minimum 2.5mm thick MS Sheet Size of Channel 25mm x 100mm x 45mm.GUIDE RAILS:The guide rails shall be made out of 28mm Brightbar place don1.2mm thick M.S.Plate which will be above the floor and are as per the international standard of safety. SUPERSTRUCTURE : Super structureof the Mobile storage systemwill consist of knockdown typepanels. All thecomponents suchas shelves, front panel, endpanel, vertical rear panel, central partition etc.Will act as an integralmember of theUnit. SHELVES: Shelves made of 22SWG thick Prime Quality C.R.C.A. having 10 fold seachwillbe provided each designed to carry aU.D.L. of 70 Kilograms.VERTICALPANEL:Vertical panel consists of the front, Centre & rear panel shallbe made out of 20SWG thickC.R.C.A. Prime quality MildSteel & designed to take the load of shelves. DRIVE COVER PANEL: Made out of 22SWG thick C.R.C.A. prime quality Steel to cover the entire drive mechanism. CENTRE PARTITION: The Centre partition will comprise of afull C.R.C.A. prime quality Mild Steel 22SWGSheet. LOCKING : System will beprovided with individual rack locking as well as centralised locking arrangement on the last unit when all units are brought together, central lock when operated gets locked withthe floor & does not allow access to the units. DRIVE MECHANISM : Driving Mechanism will be provided externally supported on special gradeanti-frictionbearingto have smooth&effortlessmovement. Entiremechanismor gear&sprockets shall beincorporatedwithin the front panel provided in the front of theunitwithinanareaof 1000mmx200mmx60mm. DRIVING WHEEL: Fully Powder Coated three pronged drivewheelforbettertorque&free movement of the rack over the guiderail. INDEXING ARRANGEMENT : Acrylic card holders provided on the front panel for easy identification&retrieval. FINALFINISH: PowderCoating(8 tanks process with 70microns)(SSR 22-23ITEM NO 51.47 PAGE NO 362 ) 22 Free Standing Table @ 1200Lx600Dx750HT --Free Standing Table @ 1200Lx600Dx750HT ProvidingandfixingTableofSize1200x600x750mm.Top:madefrom25mm PrelaminatedParticleboard. Alledgesarecoveredby2mm.Thk.PVCedgebands glued by hot melt glue applied by auto edge banding machine. Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY(WITHOUTMOUSETRAY):- MetalPowderCoated-BlackColor,CPU TROLLEY:- MetalPowderCoated-BlackColor,3DRAWERPEDESTALUNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish,faciain 18mm prelaminatedparticleboard,(SSR 22-23ITEM NO 51.28 PAGE NO 357 ) 23 Aluminium Composite Panel (ACP) -Supply, fixing and installation of 4mm thick Aluminium Composite Panel (ACP) of approved colour for external cladding in combination of solid and metallic colours, including all necessary Framework, support and complete weather sealing as per architectural drawing. The Aluminium Composite Panel (ACP) should be made out of thermoplastic core of low-density polyethylene LDPE (100% virgin mix), sandwiched between two aluminium sheets of ALLOY GRADE- 5000 series, each not less than 0.50 mm thick, total thickness of aluminium composite panels not to be less than 4 mm, the exposed surface thereof shall have Stove lacquered finishing coat not less than (26 + - 2) micron (containing minimum 70% kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface (facing the building exterior surface)shall have polyster based powder coating not less than 25 Micron with protective peel-off foil on the exterior face (peel off film will in no case leave any adhesive mark over the composite panel surface after it is peeled off). The supporting framework shall be made out of 50 mm X25mm X 3mm thick Aluminium section to be spaced horizontally and vertically for fixing of panel of size 900 mm X 1200 mm and fixed to the building structure as per design through 50mm X50mm X5 mm MS angle clamps prefixed to masonry or slab, columns with Hilti make anchor fastener screws. The fixing of panel to be done with the help of VHB tapes and screws and all the sealing of joints to be done with weather sealent Silicon as directed by Engineer-in-charge. (Prior permission of S.E. is necessary before inclusion of this item in estimate)(SSR 22-23ITEM NO 51.235 PAGE NO 416 ) 24 DOOR HANDLE & DOOR CLOSER --- Providing and fixing in position s.s.Door Handle & Door Closerfor Main doors including making required cutouts, holes for handles,patch fittings, corner fittings,Door Closer etc. The rate is inclusive of supply and fixing ofDoor Handle & Door Closeretc. complete as per site requirement and instructions of the Architect/ Client Engineer.(RA -(Mode of measurement =No.) 25 Reception Table:-- Reception Table - Table Size- 4.57 x .60 x.76 -Providing & Fixingin position of Reception table with side table, made out of 19mm thick BWP Gradeply Greenlam/Century or equivalent make ,1o mm glass for table topModi / Saint Gobain/Asahi or equivalent make,sides, apron, shelves, drawer units, shutters, drawers front, stiffeners,borders 12mmthickBWPGradeBWP Greenlam/Century or equivalent make plywood for drawer sides, keyboard, borders, foot rest & 6mm thick BWP Grade ply for drawer unit back, drawer bottom, grooves etc. teak wood with edge bedding The table shall have two drawer unitswithequaldrawersbelowalongwithprovisionforC.P.U. hanger. Table shall have 750mm in height All internal surface shall finish with 1 mm thk. off white laminate , on TableTop&Edges&customertop. Front &allexposed surfaces of the table drawer units shall have1 mm thick laminate of approved make Natural/Century / Timex or equivalentmakecolor inoneshadesfinish. including fixing of Hettich / Dorma/Ozone / Enox or equivalent make HeavyTypeTelescopicDrawerSlidingChannel,Drawer Auto Locks With One Master Key, C.P.U. trolley, KICH make orequivalentBrushFinishStainlessSteelHinges,S.Steel Handles,stainlesssteelbrasswiremanager, including making holes in glass top for wire manager etc. complete as per the detail drawing & instructions of the Architect/ Client Engineer. RA -(Mode of measurement = Length x Width) 26 Stage:-- Stage - Providing and fixingStage made from Mild Steelgrid of 2x2SquarepipeforMildSteelverticalframeand2x1 squarepipeforhorizontalframe,1.2mmthk.(18gu) covered with 19 millimeter thick BWP Greenlam/Century or equivalent Plywood. All exposed surface are to be finished with 1 mm thk.laminateNatural / century /Timex /Greenlam orequivalentlaminatefinishwithmelaminepolishand flooringwith1mmmillimeterthickpolyvinylchloride flooringVistaorequivalentmakeapplywithnecessary adhesive and edge profile as per detail drawings complete asper requirements/ instructionsof Architect/ Client Engineer. RA -(Mode of measurement= lengthx Width) 27 Podium :-- Dias- Providing and fixingPodium (table )of size 2x 2 with necessary supporting system , Top with 19 mm plywood, 10mm Glass on top ,Exposed & Un exposed surfacecovered with 1 mm thick laminate of approved color. Necessary provision to fix switches & power points, bell as directed on site etc. complete, as per detail drawing and specification. size 0.6x1.13RA -(Mode of measurement= lengthx height) 28 PANELING -LAMINATE FINISH :-- Laminate Finish Paneling - Providing and Fixing in position laminate finish paneling for walls, columns etc. made out of 50 mm X 25 mm X 1.5mm thick 12 BWP Grade Greenlam/Century or equivalent make plywoodframer frame work at every 450 mmc/c (Vertical /Horizontal) both ways, covered with 19mm thick BWP Gradeply up to ceiling height etc. All the exposed surfaces of the paneling shall be finish with1 mm thick laminate of approved make Natural /Century / Timex or equivalent colorin one shades / up to ceiling height along with 6mm wide groove at junction of laminate etc. with necessary approved make hardware Hettich / Dorma/Ozone/ Enox or equivalent make complete as per site requirements, detail drawing and instructions of the Architect/ Client Engineer.RA -(Mode of measurement= lengthx height)
