Tender For Annual Plan-Vbp 104/2025-26 Happiness Park-Vazhakkulam Bp-General Civil Work - Happiness Park 2 10.16.1:Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing Position, Ernakulam-Kerala

Tender For Annual Plan-Vbp 104/2025-26 Happiness Park-Vazhakkulam Bp-General Civil Work - HAPPINESS PARK 2 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes 3 OD338876/2025-2026:Providing and fixing Aluminium profile sheets ( size, shape and pich of corrugation as approved by engineer in charges ) 0.46mm or nearest available thickness. The sheet shall be fixed using self drilling /self tapping screws of size (5.5 x55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required .OD71/21-22 ( Approved data vide CE circular dated 18.08.2016) 4 10.25.1:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete 5 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 6 50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete 7 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 8 10.26.1:Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.M.S. tube 9 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 10 13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand). 11 13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 12 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work 13 OD339173/2025-2026:Supply and fixing 3D ACRYLIC LETTERS ENGLISH LETTERS 25-30 CM or MALAYALAM LETTERS 20-25 CM for name board etc complete as per direction of engineer in charge at site with LED lights 14 HAPPINESS PARK 15 OD338880/2025-2026:Providing and laying Interlocking concrete block pavements using 60 mm M30 paver blocks made by strong vibratory compaction of approved size, design and shape, laid in required pattern over and including a compacted bed of 6mm stone aggregate of 50 mm average thickness etc complete as per the direction of Engineer-in-charge 16 OD338882/2025-2026:Granular Sub-base with Well Graded Material (Table 400.1)&It; br &gt;(A) By Mix in Place Method <br> Construction of granular sub-base by providing well graded material, spreading in uniform layers on prepared surface, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.&It; br &gt; (iii) For Grading III Material

INR 2760 /-

INR 12.70 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB