|
| 1 | Item no.1 :-Removingtheexistingcementplasterofanythicknesswithoutcausingdustnuisanceand stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete. |
| 2 | Item no.2 :-Removingdoorsandwindowswithframesandstackingthematerialsasdirectedwithall leads, lifts etc. complete. |
| 3 | Item no.3 :-Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete. |
| 4 | Item no.4 :-Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materiasls out side etc. carefully and throwing out the refusal outside etc. complete. |
| 5 | Item no.5:-Removing cement tiles, or marble or polishedshahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete |
| 6 | Item no- 6 :-Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame withchamfer conforming to I.S.65241983 having 6mm dia bars 3 Nos.And strips @ 250 mmc/can dfixing in wall with 6 Nos. of hold fast of 12 m m diabars 500 m mlongincluding primer and oil painting etc, complete) frame size 60 mm x 125 mm |
| 7 | Item no- 7 :-Providing and fixing solid core flush door shutter commercial in single leaf 32 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast,stainless steel fixturesand fasteningsand handle son both sides and finishing with oil painting 3 coats complete. |
| 8 | Item no- 8 :-Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing,etc. complete. |
| 9 | Item no- 9 :-Providing and fixing M.S. grill Window24 Kilogram/One Square Metre of various size as per detailed drawings without hot dipcoating, iron fixtures and fastening sand 3 coats of oil painting etc |
| 10 | Item no-10 Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight o.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box |
| 11 | Item no-11 Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing with hot dipzinc coating including fabricating glazing withplain/ obscuredglass pans5 mm thick and approved type quality and iron oxidized fixtures and fastening with guard square bars 12 mm 10 cm c/c and oil painting 2 coats etc. complete. |
| 12 | Item no-12 Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12mmwithrollerwheelsconfirmingtogradeF.G.150fittedwithsnapheadedrivetsof minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clearspaceof150mmbetweentwosetsofcrossingswithholdfasts,stoppers,spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). |
| 13 | Item no-13 Waterproofing Treatment to new terrace by using Polymeric Cementitious Membraneas approved by Engineer in charge, followed by 112mm thick brick bat coba covered with 20 mm mortar finish. If there are cracks on the bare slab, open the crack in V Groove and fill it with ready to use repair polymer modified mortar based on special cements, aldehyde based polymers with thixotropy modifying agents. If there are lots of honeycombs and identified bad patches of concrete the same should be grouted as per the instructions of site incharge. (The grouting shall bepaid separately). Clean the entire surface thoroughly and over this prepared surface, applythree coats of polymeric Cementitious waterproofing coating having a non-toxic, 2-(methoxycarbonyl)-1-propene-Butyl-2 propenoate (MPBP) based polymeric waterproofing solution as approved by Engineer in charge. Provide and lay 112 mm average thicknes of brick bat coba in cement mortar 1:5 over 12mm thick CM 1:3 bedding with one pouch of 330 grams of thorough blend of special cements, aldehyde based polymers, shrinkage compensating agents as approved by Engineer in charge per 50 Kg bag of cement and finishing with 20 mm thick cement plaster in cement mortar 1:3 by mixing one 330 grams pouch of above admixture per 50 Kg bag of cement, including all lead, lifts and laid to proper slope to drain off water entirely preparing bell mouth including watta, beveled or champhered portion at the junction of parapet and work up to a height of 300 mm or as directed and including finishing the top layer of waterproofing treatement with false marking of 30 cm x 30 cm or as directed, curing and covering the whole treatment. MPBP Polymeric Waterproofing Coating for Concrete and Masonry should have following minimum properties:(1) Elongation % (ASTM D412-2016): @ 100%(2) Tensile Strength N/mm2 (ASTM D412-2016): 3.3 (3) Specific Gravity: 1.02 ± 0.02(4) Total Solids (ASTM D1644-2012): 43.98 (5) Hardness Shore A (ASTM D2240-2015): 82 |
| 14 | Item no-14 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 15 | Item no-15 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grainsandcuringforfourteendays scaffolding etc.complete |
| 16 | Item no-16 Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. |
| 17 | Item no-17 Providing and applying plastic emulsion paint of approved quality, colour and shade to old surface in three coats including scaffolding, preparing the surface. (excluding primercoat) etc. complete. |
| 18 | Item no-18 Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface,applying primer coat,scaffolding if necessary,and watering the surface for two days etc complete. NOTE: ForItem One Number 15 to 18 prior approval of Superintending Engineer will be necessary |
| 19 | Item no-19 Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc.complete |
| 20 | Item no-20 Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. |
| 21 | Item no-21 Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 22 | Item no-22 Providingandfixing75mmdiastabiliserpipe/P.V.C.soilvent/wastepipeandwith necessary fixtures andfitting such as bends, tees, single junctions, slotted vent, clamps etc. complete |
| 23 | Item no-23 Providingandfixing100mmdiastabiliserpipe/P.V.C.soilvent/wastepipeandwith necessary fixtures andfitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. |
| 24 | Item no-24:-Providing and fixing Anglo Indian type white glazed earthenware water closet pan with trap with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall with flushing cistern and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use) |
| 25 | Item no-25Providing andfixing 10cm C.I.NahaniTrapincludingC.I.gratingbendandpiece ofC.I. pipe upto the outside face of the wall complete. |
| 26 | Item no-26Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres |
| 27 | Item no-27 Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. |
| 28 | Item no-28 Providing and fixing white wash basin with half pedestal of size 515mmX615mmX460mm including pillar cock auto-closing system CP angular stop cock long thread of approved make continental including S.S. bottle trap of necessary pipe connection upto the outside face of the wall. |
| 29 | Item no-29 Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 30 | Item No.30Point wiring for light/bell/exhaust fan in minimum 20 mm HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification no. WG-PW/SW |
| 31 | Item No.31Point wiring for ceiling fan in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW |
| 32 | Item No.32 Dismantling the existing light, fan, bell, clock, independent plug point, wiring including circuit mains ofall types along with accessories etc. complete as per specification No: WG-DM/PW |
| 33 | Item No.33- Dismantling the existing ceiling fan /exhaust fan / cabinfan / bracket fan complete withccessories, G.I. down rod,frame etc. and making the site clear |
| 34 | Item No.34- Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. |
| 35 | Item No.35-Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete |
| 36 | Item No.36- Supplying and erecting modular type (two module) electronic step regulator for fan, dulyrected on provided plate and box with wiring connections complete. |
| 37 | Item No.37- Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 module duly erected. |
| 38 | Item No.38 - Supplying and erecting bracket fan 400 mm. sweep A. C. 230 volts 50 cycles 1350 RPM. Oscillating type, plastic or metal blades chrome plated guard with speed regulator and moisture proof treatment to winding and with ‘E’ class insulation. |
| 39 | Item No.39- Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation. |
| 40 | Item No.40- Supplying and erecting fan clamp of 30 x 5 mm. M.S. flat of required length and 10 mm. M.S. bolt and nuts erected with necessary hook of 10 mm. M.S. round bar and painted |
| 41 | Item No.41-Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire. |
| 42 | Item No.42- Erection of departmentally supplied ceiling fan with necessary materials complete. |
| 43 | Item No.43-Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW |
| 44 | Item No.44-Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG- A/BW |
| 45 | Item No.45-Supplying and erecting LED square / circular Max. 14 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of0,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type orpring loaded mounting clips complete with 2 years warranty. |
| 46 | Item No.46-Supplying and erecting LED square / circular Max. 25 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 2 years warranty. |
| 47 | Item No.47- Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 48 | Item No.48Pupplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON. |
| 49 | Item No.49 Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32 mm with accessories on wall/ceiling as per specification No: WG-MA/CON. |
| 50 | Item No.50-Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP |
| 51 | Item No.51-Excavation in all kind of soil including boulders upto 0.6 m diameter (0.113 cum) for canal, seating of embankment filters drains / catch water drains etc. And placing theformation of service road / embankment as directed including cost of all materials, machinery, labour, dressingexcavated stuff neatly in dump area or forbed and sides to required level and profile etc. complete with lead upto 1 km and all lift as directed. |
| 52 | Item No.51-Excavation in hard murum including boulders upto 0.6 m diameter (0.113 cum) for canal, seating of embankment filters drains / catch water drains etc. And placing the excavated stuff neatly in dump area or forformation of service road / embankment as directed including cost of all materials, machinery, labour, dressingbed and sides to required level and profile etc. complete with lead upto 1 km and all lifts as directed. |
| 53 | Item No.52- Excavation in soft rock including boulders upto 0.6 m diameter (0.113 cum) for canal, seating of embankment filters drains / catch water drains etc. And placing the excavated soft rock neatly in dump area or forformation of service road / embankment as directed including cost of all materials, machinery, labour, dressingbed and sides to required level and profile etc. complete with lead upto 1 km and all lifts as directed. |
| 54 | Item No.53-Providing and laying rubble soling below foundation in layers including filling with rubble chips, murum etc. Complete (excluding royalty of material) |
| 55 | Item No.54-Back filling up to ground level behind the canal structures etc. Complete (without royalty) with suitable materialof approved quality in layers not exceeding 20 cm without disturbing the structure etc. Complete |
| 56 | Item No.55-Providing and laying in situ cement concrete of grade M-10 of trap/ granite / quartzite / graded metal forfoundation and bedding with Batching Plant & Transit Mixer including shuttering, placing, compacting, curing,etc. complete with all leads & lifts as directed |
| 57 | Item No.56-Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite metal for RCC works of retaining walls, piers, abutments, etc. with Batching Plant & Transit mixer, includingshuttering, scaffolding, placing, compacting, curing etc. complete with all leads & lifts as directed. |
| 58 | Item No.57-Providing andl aying insitu cement concrete of grade M-20 of trap/granite/gneiss/quartzite/gradedmetal forRCCworks of abutment,wingwalls,returns,transitionwalls,piers,columns,beamsandslabs,diaphragmwalls,road slabs trough (Box Culvert) troughforaqueduct,wearingcoat,etc.withBatchingPlantandTransitmixerincluding centering, shuttering, scaffolding, placing, compacting, curing etc. complete with all lifts as directed. |
| 59 | Item No.58-Providing and fixing in position M.S. bar reinforcement for R.C.C. work as per detailed design and drawing including cutting, bending, hooking, and binding with wire etc complete. |
| 60 | Item No.59-Providing and laying insitu cement concrete of grade M-20 of trap/granite/gneiss/quartzite/graded metal forRCC works of abutment,wingwalls,returns,transitionwalls,piers,columns,beamsandslabs,diaphragmwalls,road slabs trough (Box Culvert) troughforaqueduct,wearingcoat,etc.withBatchingPlantandTransitmixerincluding centering, shuttering, scaffolding, placing, compacting, curing etc. complete with all lifts as directed. |
| 61 | Item No.60- Providing &Laying expansion/constuctionjoint with shalitex super expantion pad ( jute fibre 12 mm thick ) including sealling the joint with shalitex sealling compound etc complete as diterected ( for all slab thikness) |
| 62 | Item No.61-Dismantling the old lime concrete or cement concrete including stacking the material with all lifts etc.complete as directed. |
| 63 | Item No.62-Providing and laying R.C.C. NP2pipeOf approved quality with all leads and lifts etc complete. |
| 64 | 1) 600 mm dia. |
| 65 | Item No. 63 Carrying out the irrigation management activites by providing skilled/unskilled personnels to assist canal inspector or departmental stafff including taking the \"Pani arj\" from farmers, Measurements of irrigation crops under irrigation outlets from survey no./gut no./ pot hissa and recording on field books with keeping record of ater letout and gauages on registers during each rotation and distributi8ng the water assesments bills afer each season including each and every work related to irrigation management including to and fro conveyance and oher necessary aminities to staff etc completed as directed by engineer -in-charge. |
| 66 | A) Irrigation throughb canal flow |
| 67 | B) Irrigation through Lift |
| 68 | Item no. 64-JCB for emergencyremoval of shrubs interupting flow of water in distributory and minors,clearing path, operating gates and emergency maintenance of canal |
| 69 | Item No 65 :Prviding X Ray quality M.S. Welding in all positions with required number of runs for M.S. pipes internally and/or externally including gauging wherever necessary, fixing appurtenances and otheraccessories in connection with pipe laying work as per specification using electrodes having weld mark E7018 (Low hydrogen electrodes), including Surface preparation (i.e.removal of scale, cleaning etc)including all materials, labour, equipments, etc complete. |
| 70 | Item No.66-Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond thebuilding area and stacking and spreading as directed, dewatering, preparing the bedfor the foundation and necessary back filling, ramming, watering including shoring andstrutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 71 | Item No.67-Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc.complete |
| 72 | Item No.68-Free Standing Table @ 1200Lx600Dx750HT Providing and fixing Table of Size 1200 x 600 x 750 mm. Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :- Metal Powder Coated- Black Color, CPU TROLLEY :- Metal Powder Coated- Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board, |
| 73 | Item No.69-Public Seating Chair. - 3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish |
| 74 | Item No.70-Sofa Set 3+1+1Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length:182.5 (cms) Breadth (cms): 100 (cms)Height (cms): 100 (cms) Weight (Kilograms): 66(Kilogram) Seating Capacity: Five Seat |
| 75 | Item No.71-Providing and fixing shutter to wall cupboard made from 19 mm thick Teak particle board with approved coloured laminated face 1.5 mm thick bonded with phenol formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidisedfixtures andfastening and oil primer coat etc. complete. (Excluding cupboard frame) |
| 76 | Item No.72-Providing & Arrangemnt of Mid Back, ECO CTS Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery |
| 77 | Item No.73-Full Height Partitions in Glass finish- Providing and Fixing 80mm to 85mm thick Fullheight Double Skin partition up to 3 mtr height with All visible sections in Anodized / Powdercoated finish. Made up of Frames and Tiles. Frame construction In combinaton of Aluminium Rails and Bottom ,Center and Top members, Connected with 2 way Round Shape Post , 3way Post , 4 way Post made up of Aluminium Extruded and Tiles in 5mm thk. Non Toughened Glass on both side. With all the Joints in the partitions covered withPVC extrusions to provide better sound Proofing. Tiles to be separated 55mm from each other to provide adequate space for drawing cables for electric, data and telephone withproper facility for fixing electrical and data switch plates. as per design and drawing |
| 78 | Item No.74-Providing and fixing of colour coated Zinc aluminium ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950 1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capacity groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) 900 mm girth (Surface Width) |
