|
| 1 | BANDHARA ITEM NO. 1:-Clearing cutting thorny shurbes, bushes, mooleyhills etc. complete |
| 2 | ITEM NO. 2:-Excavation in HARD MURUM/hard man kankar/pebbles,exceeding 1.5m in width includingdepositing the material as directed with all lead upto 15mand lift into 1.5m including boulders of size less than 0.10 cum including dressing etc complete. |
| 3 | ITEM NO. 3:-Excavation in SOFT ROCKexceeding 1.5m in width including depositing the material as directed with all leads and lifts including boulders of size less than 0.10 cum, dressing etc complete. |
| 4 | ITEM NO.4:-Excavation in HARD ROCKexceeding 1.5min width by blasting including depositing the excavated material as directed with all leads and lifts including boulders of sizeexceeding 0.10 cum including dressing etc complete |
| 5 | ITEM NO. 5:-Providing and laying in situ C.C. of grade M - 150 (1:2:4) of trap / granite / gneiss / quartzite graded metal compacting curing etc complete with initial lead of 50 m & lift of 1.5 m ( 40 M.S.A. ) |
| 6 | ITEM NO. 6:-Providing errecting & laying steel form work for plane surface including splicing making surface plane for connecting including dismantaling |
| 7 | ITEM NO. 7:-Providing & laying in position TOR steel reinforcement including Cutting bending binding including cost of reinforcement binding wire etc complete with a lead of 50 m & lift of 1.50 m |
| 8 | ITEM NO. 8:-Providing DI pipes (push on joints pressure pipes of DI of following class and diameters confirming to the IS specification inclusive cost of jointing materials Rubber gasket of EPDM |
| 9 | ITEM NO.9 :-Dewatering during Excavation |
| 10 | Item No .10 - Constructing of embankment for casing zone with selected material |
| 11 | ITEM NO. 11:-Providing constructing coffer dam in river basin / dam storages as per type design including excavation ,filling ,the middle portion with BC soil (in gunny bags if required). Providing impervious / semipervious materials on both side of BC soil (in gunny bags if required ) including ramming ,compacting to the satisfaction of Engineer in charge, till the complection of works including dismantling coffer dam after completion of works and disposing off the material as directed by the Engineer in charge..etc. complete. |
| 12 | ITEM NO. 12:-Providing and constructing D/S rock toe with 15 to 23cm rubble stone of approved quality from available material with hand packing including lead of 15m and lift of 1.50m etc complete. |
| 13 | Connecting pipeItem No. 1 - Excavation in general in soft material comprisingof soft soil, soft murrum, sand, hard murum with boulders in wet or dry condition for Head Works I.e. intake well, connecting pipe Jack well, pump House, supply well etc. for lift\"0 to 1.5 M & lead \"of 1.50Mincluding barricading, guarding, depositing oft surplus excavated stuff within a radius of 0.5km as directed by Engineer-in-charge-,etc \"complete excluding refilling Lift 0.00 M to 1.50 m |
| 14 | Lift 1.50 M to 3.00 m |
| 15 | Item No. 2 - Dewatering the excavatyed trenches and pools of water by using pumps and other devices including disposing of the water to safe distance as directed by Engineer-in-Charge (including cost of machinerylabour fuel )etc complete |
| 16 | Item No. 3 - Providing D.I. pipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality ) excluding GST levied by GOI & GOM in all respect including Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store, unloading, stacking etc. completed as directed by Engineer in charges (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edition/revision with amendments for Rubber Gaskets. 450 mm dia DI K-7 |
| 17 | Item No. 4 - Lowering laying and jointing with SBR ruber gaskets C.I. S/S pipes of various classes with CI / MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour etc. complete.a) 450mm dia DI K-7 |
| 18 | Itemno: 10- Providing rubble stone paving 15 cm thick in 1:3 cement mortar over bedding of 15 cm thick cement concrete of 1:4:8 proportion with trap /granite / quartzite / gneiss metal including striking joints and watering etc. complete. |
| 19 | Item No.11- Providing internal cement plaster 20mm. thick in two coats in cement mor tar 1:3 wi thout neeru finish, to concrete, br ick sur face, in all posi t ions including scaffolding and cur ing etc. complete. |
| 20 | Item No.12 :-Providing uncoursed rubble masonry of trap / granite / quartzite /gneiss stones in cement mortar 1:6 in foundation and plinth of innerwalls / in plinth of external walls including bailing out water manually,striking joints on un exposed faces and water ing etc.complete. |
| 21 | Item No.15 :-Providing and fixing 90 cm x 60 cm Marble plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete |
| 22 | Switch Room - Item No. 1 - Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A- 1/259) |
| 23 | Item No. 2 - Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-2/259) |
| 24 | Item No. 3 -Providing and laying in situ cement concrete in M – 15 (1:2:4) grade of trap /granite/quartzite/gneiss metal for foundation & bedding including bailing out water manually, form work compaction & curing, etc complete. |
| 25 | Item No. 4 - Providing uncoursed rubble masonry of t rap / granite / quartzite /gneiss stones in cement mor tar 1:6 in foundation and plinth of innerwalls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and water ing etc.complete. |
| 26 | Item No. 5- Providing second class Burnt Br ick masonry wi th convent ional/ I.S.type br icks in cement mor tar 1:6 in superst ructure including striking joints, raking out joints, water ing and scaffolding etc. Complete |
| 27 | Item No. 6 - Providing and casiting in situ CC of trap /granite/quartzite/gneiss metal ofapprovedquality for R CCwork asper detailed drawing anddesigns or as diredcted by Engineer – in- charge including normal dewatering, centering, fromwork,compaction, finishing the formed surface withCM 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish to be provided and curing, etc complete.Slabs b) In RCC M-200 |
| 28 | Item No. 7 -Providing internal cement plaster 20mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and cur ing etc. complete. |
| 29 | Item No. 8 - Filling the plinth & floors Murum bedding in trenches with approved murum from excavatyed materials form foundation15 cm. to 20 cm. layers including watering and compaction complete. |
| 30 | Item No. 9- Providing and laying cement concrete flooring 40 mm thick wi th M15 cement concrete laid to proper level and slope in alternate bays including compact ion, fi lling joints, marking lines to give the appearance of t i les of 30 cm x 30 cm or other size laid diagonally / square etc finishing smooth (wi th ext ra cement ) in any colour as directed and cur ing etc. complete. With Natural Sand |
| 31 | Item No. 10 - Providing and fixing frame wi th / wi thout ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebat ing, iron holdfast of size 300mm x 40mm x5mm with oil paint ing, etc. complete |
| 32 | Item No. 11 - Providing and fixing Count ry cut teak wood double or single leaf panelled shut ters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detai led drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work wi th oil paint ing 3 coats complete |
| 33 | Item No. 12 - Providing and fixing Count ry cut teak wood windows wi th double leaf 25 mm thick planked shutters without ventilators as per detailed drawings including stainless steel fixtures and fastenings and finishingthe wood work wi th oil paint ing 3 coats etc. complete |
| 34 | Item No. 13 - Providing flush grooved pointing with cement mor tar 1:3 for stone masonry work including scaffolding and curing etc. complete. |
| 35 | Item No. 14 - Providing and applying washable oil bound distemper of approved colour and shade to old/ new surfaces, in three coats including scaffolding, preparing the surface to receive the priming coat and finishing coat etc. complete. |
| 36 | Item No. 15- Providing and fixing locking arrangement the standered qualityof lock for pump house, etc complete |
| 37 | Item No. 16 - Providing and fixing in position steel bar reinforcement of various diamenters for RCC piles, caps, footing, foundation, slabs, beams, columns, canopies, staircases, newels,chjjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking he bars, binding with wires or tack welding and supporting as required, etc. complete.(including cost of binding wire) |
| 38 | PumpingMachinery -Item No. 1 - Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer\"s design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump.Submersible Pump 150 mm dia (with Bronze / Stainless steel (CF8M) Impeller) up to 8 stages |
| 39 | Item No. 2 - Supplying and erecting, Flat flexible submersible cable with, Copper Conductor, PVC insulated, and PVC sheathed.3 core 10 sqmm |
| 40 | Item No. 3 - Supplying and erecting Fully Automatic Star Delta starter to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil, over load element, and ON -OFF push buttons, with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser. |
| 41 | Item No.4 - Providing , installing & commissioning main control pannel boardincluding V. meter & A. meter of suitable range single phase prevention 8 Nos. of phase indicater lamps with colour glass of 230 V rotary switch over load capacitor suitable for 7.50HP and 12.50BHP pump etc.complete. (Market rate) |
| 42 | Item No.5 Providingerecting pressure guage of required range complete with syphon tube, isolating cock suitable for 12mm dia G.I pipe pressure guage shall be installed as directed with tapping |
| 43 | Item No. 6 Providing tools for pumping. |
| 44 | Item No. 7 - Main wiring work from M. S. E. B. cut out to the panel board 4 core x 459 mm 1100 grade with I. S. I. Mark standard / Aluminum armored cable (94.1 p.36) |
| 45 | Item No. 8 Providing pipe type earthing with 40 mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP |
| 46 | Inline Water Filter Plant - Item No.1 Designing (aesthetically), providing, Inline Water Treatment Plant At the shop transporting to site installing testing andcommissioning at the site, giving necessary one month’s free test and trial run with guarantee for one year,etc.complete. Prefabricated Package Water Treatment Plant comprising following As per Market Rate Quotation |
| 47 | B Now to supply |
| 48 | Item No. 2 - 5% of cost of pipes shall be considered for cost of PVC/HDPE specials for estimate purpose only. |
| 49 | Item No. 3 - Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete Sluice valves 150 mm Dia. PN 1.6 |
| 50 | Item No. 4 - Providing & supplying ISI mark CI D/F reflux valve (Non- return valve) of following dia including all taxes (central and local), railway freight, inspection charges unloading from railway wagon, loading into truck, transportation upto department stores/site, unloading, stacking etc. complete. reflux valves as per I.S.5312 part I (1984)Reflux valves 150 mm Dia |
| 51 | Item No. 5 - Providing, erecting, connecting double flanged short body pattern tye manually operated Butterfly Valve having body, disc and end cover in graded cast iron to IS 210 Gr. CF 200generallyconforminginBS5155,Syntheticrubber faced ring secured on disc by retaining ring with stainless steelscrewstubshaftofstainlesssteelridinginTeflon bearings excluding C.C. foundation/ structural steel support confirming to IS 3095-1991.Sluice valves 150 mm Dia. PN 1.6 for Washout |
| 52 | Item No. 6 - Providing and supplying Air valves as per IS-10845 and MJP’s standard specifications of approved mark and quality of following diameters including all taxes (Central and local), railway fright, inspection charges unloading fromrailwaywagons,loadingintotruck,transportation upto departmental stores/ site, unloading and stacking etc. complete.Air valves 50 mm Dia |
| 53 | Item No. 7 - Excavation for foundation/ pipe trenches in earth, soils of all types, sand gravel and soft murum, including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 54 | Item No. 8 - Excavation for foundation/pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back- filling, etc. complete. |
| 55 | Item No. 9 - Excavation for foundation/ pipe trenches in soft rock and oldcementandlimemasonryfoundationasphaltroad including removing the excavated material upto a distance of50Mbeyond areaandliftsasbelow,stackingas directed by Engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 56 | Item No. 10 - Excavation for foundation / pipe trenches in hard rock by controlledblasting,includingtrimmingandlevellingthe bedbychisellingwherenecessaryandremovingthe excavatedmaterialandstackingitinmeasurableheaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. Lift 0 to 1.5 M |
| 57 | Item No. 11 - Filling in plinth and floors murum bedding in trenches with approved murum from foundation 15 cm to 20 cm layers including watering and compaction complete. |
| 58 | Item No. 12 - Lowering, Laying and Jointing H. D. P. E./ M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II 180 mm Dia HDPE Pipe 10 Kg/sqcm |
| 59 | Item No. 13 - Lowering laying and jointing inposition following C.I.D/F Reflux valves Butterfly valves and sluice valves including cost of all labour joining material, including nut bolts and givingsatisfactoryhydraulictestingetc.complete.(Rate for all class of sluice valves)Sluice valves 150 mm Dia. PN 1.6 |
| 60 | Item No. 14 - Lowering laying and jointing inposition following C.I.D/F Reflux valves Butterfly valves and sluice valves including cost of all labour joining material, including not bolts and givingsatisfactoryhydraulictestingetc.complete.(Rate for all class of sluice valves)Reflux valves 150 mm Dia |
| 61 | Item No. 15 - Lowering laying and jointing inposition following C.I.D/F Reflux valves Butterfly valves and sluice valves including cost of all labour joining material, including not bolts and givingsatisfactoryhydraulictestingetc.complete.(Rate for all class of sluice valves)Sluice valves 150 mm Dia. PN 1.6 for Washout |
| 62 | Item No. 16 -Lowering, Layingand fixing in proper alignment and position all types of C.I. Air valves as directed by Engineer in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc complete.Air valves 50 mm Dia |
| 63 | Item No. 17 - Providingandfixinginpositionairvalveshaftincluding providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providingPCCblockofM-150concrete150mmthick aroundtheairvalveteeincludingencasingofvertical shaft in PCC M-150 as shown in type design together with providingandmakingflangedjointswhereverrequired and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines (type design attached.) |
| 64 | Item No. 18 - Providingandlayingin situfollowinggradesofC.C.of trap/granite/quartzite/gneiss metal for foundation and bedding including dewatering, form work, compacting and curing, finishing etc. complete. |
| 65 | Item No. 19 - ProvidingandconstructingB.B.masonryvalvechamber with 15 cm thick 1:3:6 proportion PCC bedding, including excavation, B.B. masonry in C.M. 1:5proportion 12 mm thickcementplasterincm1:4proportiononbothsides with providing and fixing C.I. manhole frame and cover in RCC1:2:4copingorcmthickslabetc.completeas directed by Engineer-in-charge. |
| 66 | Item No. 20 - Refillingthetrencheswithavailableexcavatedstuffwith soft materialfirst over pipeline andthen hardmaterial in 15 cm layers with all leadsand lifts including consolidation, surcharging, etc. complete |
| 67 | Item No. 21 - Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.180 mm Dia HDPE Pipe 10 Kg/sqcm |
| 68 | R.C.C. GSR- Item No. 1 - Designing (aesthetically), and constructing RCC ground service reservoirs / RCC sumps in M-300 mix. of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top RCC roof slab / or dome, 20 mm thick cement plaster with water proofing compound in CM 1:3 proportion. to inside face of the container,including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 M, all labour and material charges, for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bye-pass arrangement consisting of C.I./ M.S. D/F. pipes, specials and valves of given diameters, providing and fixing accessories such as Stainless Steel ladder inside and outside, C.I. Manhole frame and cover, water top slab, B.B. masonry chamber for all valves, ventilating shafts, including giving satisfactory hydraulic test and water tightness test as per IS code and providing three coats of Acrylic emulsion with Silicon additives Paint to all expose surface of structure including roof surface etc. complete as per design data, criteria, obligatory requirements and detailed specifications. |
| 69 | Item No. 2 - Providing ISI mark G.I. pipe offollowing class and dia. excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. complete as per IS-1239/2004.150mm dia B Class GI Pipe |
| 70 | 125mm dia B Class GI Pipe |
| 71 | Item No. 3 - Providing and supplying double flange sluice valves confirming for IS 2906/14846 including warn gear arrangement as per test pressure stainless steel spindle capsexcluding GST levied by Gol and GoM in all respect, transportation etc complete. Sluice Valve 250 mm Dia ( PN -1) |
| 72 | Sluice Valve 200 mm Dia ( PN -1) |
| 73 | Item No. 4 DI Specials 5% of cost of pipe |
| 74 | Distribution System Item No. 1 - Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.63 mm Dia HDPE Pipe 6 Kg/sqcm |
| 75 | 75 mm Dia HDPE Pipe 6 Kg/sqcm |
| 76 | 90 mm Dia HDPE Pipe 6 Kg/sqcm |
| 77 | Item No. 2 - 5% of cost of pipes shall be considered for cost of GI/PVC/HDPE specials for estimate purpose only. |
| 78 | Item No. 3 - Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Sluice valves 50 mm Dia |
| 79 | Sluice valves 65 mm Dia |
| 80 | Sluice valves 80 mm Dia |
| 81 | Item No. 4- Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-1/259) |
| 82 | Item No. 5 - Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (BdA-3/259) |
| 83 | Item No. 6- Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) |
| 84 | Item No. 7 - Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259) |
| 85 | Item No. 8 - Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-10/263) |
| 86 | Item No. 9 - Lowering, Laying and Jointing H. D. P. E./M.D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II 63 mm Dia HDPE Pipe 6 Kg/sqcm |
| 87 | 75 mm Dia HDPE Pipe 6 Kg/sqcm |
| 88 | 90 mm Dia HDPE Pipe 6 Kg/sqcm |
| 89 | Item No. 10 - Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.)Sluice valves 50 mm Dia |
| 90 | Sluice valves 65 mm Dia |
| 91 | Sluice valves 80 mm Dia |
| 92 | Item No. 11 - Providing and laying in situ Cement Concrete of trap/ granite / quartzite /gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering,form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)a) 1:2:4 (M-150) grade for Thrust Blocks b) 1:2:4 (M-150) grade for encasing |
| 93 | Providing and fixing C.I. road box includingloading, unloading and carting to site of workincluding all necessary excavation in all typesof strata and fixing in murum packing, etc.complete.225 mm x 300 mm (40 kg) |
| 94 | Item No. 14 - Refillingthetrencheswithavailableexcavatedstuffwith soft materialfirst over pipeline andthen hardmaterial in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete |
| 95 | Item No. 15 - Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.63 mm Dia HDPE Pipe 6 Kg/sqcm |
| 96 | 75 mm Dia HDPE Pipe 6 Kg/sqcm |
| 97 | 90 mm Dia HDPE Pipe 6 Kg/sqcm |
| 98 | Item No. 16- Providingandfixingboarddisplayinginformation, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangularshapeof1.20mx0.90msize made out 18 gauge (1.25 mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stoveenamelonbacksideandborder/messages /symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x35 x3 mm frame with properly cross braced M.S.angles of size 35 mm x 35 mm x 3 mm duly painted including Two M.S.angle iron posts of size 65 mmx 65 mmx 6 mm, 3.65mlongpaintedwithalternateblackandwhite bandsof25cmwidthincludingallfixturesetc.and fixing the boards in 1:4:8 concrete block of size 60 cm x60cmx75cmincluding,excavation,refilling, transportation,andlabouretccomplete.Spec. Number As directed by Engineer in Charge MORTH 801 |
| 99 | Item No. 17 Providing and making UPVC/MDPE pipe consumer service connection on Distribution main by drilling hole with suitable means , including all labour, UPVC/MDPE Pipe of required length with or without Road crossing as described below, including cost of specials like Saddle/Clamp Saddle of suitable material, and diameter suitable for Distribution main, 15mm /20mm/25mm respective Dia Heavy duty Brass/Polyprophylyne (Twin Jacketed ) Ferrule , Male and Female thread adapter Elbow, Bends,couplers ,Tees, Clamps of suitable material and sundry materials as per requirment, including providing and fixing medium duty 15.mm brass bib tap, GI casing pipe of suitable diameter of 32mm/ 40mm/ 50mm respectively of required length for Road crossing, including requird labour for excavation in all types of strata up to the depth of 0.75m or as per site requirement,all types of plumbing fittings, refilling , Closing the water supply in that area, dewatering, hydraulic testing and restarting the water supply ,transportation of material etc. complete as directed by Engineer in (Without Road Crossing) For 15 mm Service connection |
| 100 | Misc Works Item No. 1 - Providing & streching transmission line & making Additional electric load connection to Head works, including all charges as per MSEB rule |
| 101 | Trial Run ITEM NO. 1 - Commissioning, running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and for regional scheme, together with training of personnel spared by MJP / Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge. |
| 102 | Add 12% GST |
