Youth Affairs and Sports and Culture Government Departments Closing in 0 days TDR #51758080

Tender For Supply & Installation Of Indoor Wooden Flooring & Badminton Court & Synthrtic Court Sarfes Ø; Gsrqß Njsa

Issued by Government Departments · bhopal, Madhya Pradesh
Tender Value
1 Crore
Estimated cost
Bid Submission
03 Nov 2025
0 days left
EMD
3 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Supply & Installation of Indoor Wooden Flooring & Badminton Court & Synthrtic Court Sarfes Ø; gsrqß njsa Wooden Flooring 2025 Ist Call E Tender For Supply And Installation Of Synthetic Wooden Flooring 2025 First Call , Annexure :-1 , Providing And Fixing For Maple Hard Wood Flooring Including All Labour And Material Etc. Complete :- The Specification Of The Above Maple Hard Wood Flooring Are As Under Hard Maple Flooring- Provide And Laying 20Mm Thick Sports Flooring, Each Individual Strip Of Hard Maple Shall Include The Engraving Of The Mfma (Maple Flooring Manufacturers Association) And Manufacturing Mill Certification Number.Minimum Width Of Hard Maple Boards Is 57Mm And Of Random Length, Varying From 230Mm To 1800Mm, Jointed Together With The Help Of Tongue And Groove On All Four Sides Of All Boards.Substructure Of Maple Wood Shall Consist Of Softwood Batten, Substructure Of Maple Wood Flooring Shall Consist Of Sleeper Of Spruce Or Pinehaving63mm Wide (Minimum) Length Between 1220 Mm(Minimum) Cross Section Of 38 Mm (Minimum) And Laid Perpendicular To The Main Flooring Planks At A Spacing 305Mm Centre To Centre, Including 19Mm(Minimum) Thick Shock Pads/Cushions At The Maximum Spacing Of 10 ” Centre To Centre On Each Sleeper, Vapor Barrier:-0.20Mm Polyethylene Membrane Installed Over The Concrete Base, Beneath The Flooring System As A Vapor Barrier Between The Concrete And Wood Floor. Gym Finish-Machine Sanding, 2 Coat Of Oil Modified Poly Urethane Gym Sealer And 1 Coats Of Oil Modified Poly Urethane Gym Sports Finish In Accordance With Manufacturer Specification, And Game Line Marking In Accordance With Manufacturers Specifications And Project Drawings Etc Complete To The Entire Satisfaction Of Engineer-In-Charge. 1. Wooden Flooring System Shall Be Approved By Federated International Basketball Federation (Fiba),Badminton World Federation (Bwf), International Handball Federation (Ihf) Certificates Of Such To Be Provided As Evidence Of Such, 2. Floor Should Be Certify By Mfma (Maple Flooring Manufacturers Association), 3. Flooring System Should Be Certified By En14904 Or Dinperformance Standard., 4. Manufacturer To Be Certified In Accordance With Iso9001:2000 Standard- Iso Certificate To Be Provided As Evidence Of Such Wooden Flooring Pads Must Be Independently Tested In Accordance With Oxygen Aging Test And Provide A Result Of 2.5% Maximum Variance In Deformation At A Average Compression Load Of 4Mm. Official Test Report To Be Provided As Evidence Of Such. , Supply Of 75Mm X 100Mm Rubber Base Molding To Include Air Channeling In Back Of Base To Provide Full Ventilation Of The Sub-Floor System.Fixed To The Wall With A Base Molding Adhesive As Recommend By Manufacturer , Sanding And Re Polishing Work On Existing Wooden Sports Flooring- Machine Sanding And Buffing Onhard Maple Floorwith Coarse, Medium, And Fine Abrasives To Provide A Smooth Uniform Surface. Apply 2Cot Of Connor Oil Modified Polyurethene Gym Sealerand1 Coat Ofgym Finish And Game Line Marking Asper Manufacturer’S Instructions , Anti Termite Treatment For Wooden Sports Flooring And Periphery Of Concrete , Self- Levelling Compound Over Existing Undulated Concrete Sub Base. Supply Of 0-5 Mm Thick Self Levelling Compound On Existing Undulated Concrete Sub-Basewith Special Cement With Fast Setting And Hydration Together With Graded Silica Sand Resins And Special Additivesmixed With Water,Consumption Of Material Not Less 1.6 Kg/M2 Per Mm Of Thickness. , Annexure :-2 , Supply Of Badminton World Federation Approved Portable Synthetic Floor Whichconsist Of 100% Pure Vinyl Wear Layer Badminton Court Size:-Not Less Than= 8 Mtr X 16 Mtr = 128 Sqm, Surface Thickness Should Not Less Or More Than 3 Mm – 4Mm, Surface Treatment :- Surface Should Be Treated To Reduce Skin Burn, Surface Texture :-Canvas Textureor Equivalent For Good Grip, Installation System: - Easy & Permanent Installation Solution To Install Badminton Court With The Help Ofzip Or Velcro System. Game Lie Marking: - Factory Make Game Line Marking & As Per Wbf Standard., Portable Badminton Court Should Approved By Badminton World Federation . , Synthetic Sportsflooringfor Indoor Volleyball, Basketball, Handball, Table Tennis And Badminton Court For Various Stadium In Mp Providing And Layingsynthetic Sports Surface Withtotal Thickness Of 12 Mm Thick, Combining Two Layerinstallation With 5Mmpolyoléfine Foamand 7 Mm Thick Synthetic Floor Whichconsist Of 100% Pure Vinyl Wear Layer Not Less Than 2 Mm Thick,Protecsoland Sanosol Treated To Reduce Skin Burn With Double Fiber Glass Grid For Sound Stability On Floorand 5 Mm Double Density Foam Backingensuring Highest Possible Resistance To Indentation, Durability And Energy Return, Width Of Sheet Not Less Than 1.5 Mjoined With Seamless Hot Welding.Laid With Adhesive As Per Manufacturer’S Instruction Over Existing Leveled Surface Including Game Lines Marking With Following Specification. Shock Absorption Under En 14808 Standard Not Less Than 45%Ball Bounce Under En 12235 Standards Not Less Than 90%Abrasion Resistance As Per En Iso 5470-1 Shall Be < 350 Mg.Friction Coefficient As Per Din - 180320.4 - 0.6, Impact Resistance As Per Din 18032 > 7 N/M., Sound Isolation Shall Be > 23 Db. Special Conditions :- 1. The Above Should Be Approved By Following International Federation. • International Handball Federation.(Ihf) • Federation International Basketball Association, (Fiba) • Federation International Volley Ball (Fivb) • Worldbadminton Federation ( Wbf) 2. The Tenderer Shall Submit The Warranty Certificate From The Original Manufactures For 10 Years. , International Volleyball, Handball Basketball And Badminton Federation Approved Rollable Mutipurpose Synthetic Sports Flooring. Supply Of International Volleyball Federation Approved Roll Able Synthetic Sports Flooringnot Less7 Mm Thick,Whichconsist Of 100% Pure Vinyl Wear Layer Not Less Than 2 Mm Thick, Withprotecsoland Sanosol Treated To Reduce Skin Burn With Double Fiber Glass Grid For Sound Stabilityon Floordouble Density Foam Backing Ensuring Highest Possible Resistance To Indentation, Durability And Energy Return, Width Of Sheet Not Less Than 1.5 Mjoined Looselay Installationwith 2 Set Of Double Side Tapeas Per Manufacturer’S Instruction Over Existing Leveled Surface Includingtemporary Game Lines Marking With Following Specification. Shock Absorption Under En 14808 Standard Not Less Than 25%Ball Bounce Under En 12235 Standards Not Less Than 90%Abrasion Resistance As Per En Iso 5470-1 Shall Be < 350 Mg. Friction Coefficient As Per Din - 180320.4 - 0.6, Sound Isolation Shall Be > 23 Db Manufacturer Warranty Should Not Less Be Than 5 Year Surface Should Be Used In One Of The Last Two Olympic Games Or World Champion Ship (In Any Of The Sports For Which The Surface Is Being Procured). • Synthetic Flooring System Should Be Approved By Following International Federation. International Handball Federation. (Ihf) • Federation International Basketball Association, (Fiba) • Federation International Volley Ball (Fivb) • Badminton World Federation (Bwf) , Synthetic Sportsflooringfor Indoor Volleyball, Basketball, Handball, Table Tennis And Badminton Court For Various Stadium In Mp Providing And Layingsynthetic Sports Surface Withtotal Thickness Of 6 Mm Thick, Synthetic Floor Whichconsist Of 100% Pure Vinyl Wear Layer Double Density Foam Backing Ensuring Highest Possible Resistance To Indentation, Durability And Energy Return, Width Of Sheet Not Less Than 1.5 Mjoined With Seamless Hot Welding.Laid With Adhesive As Per Manufacturer’S Instruction Over Existing Leveled Surface Including Game Lines Marking With Following Specification. Shock Absorption Under En 14808 Standard Not Less Than 45%Ball Bounce Under En 12235 Standards Not Less Than 90%Abrasion Resistance As Per En Iso 5470-1 Shall Be < 350 Mg.Friction Coefficient As Per Din - 180320.4 - 0.6, Impact Resistance As Per Din 18032 > 7 N/M., Sound Isolation Shall Be > 23 Db. Special Conditions :- 1. The Above Should Be Approved By Following International Federation. • International Handball Federation.(Ihf) • Federation International Basketball Association, (Fiba) • Federation International Volley Ball (Fivb) • Badminton World Federation ( Bwf)

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 30-Oct-2025 Technical Date 03-Nov-2025

BOQ

Name of Work: Supply & Installation of Indoor Wooden Flooring & Badminton Court & Synthrtic Court Sarfes Ø; gsrqß njsa
Sl. No. Item Description
1Annexure :-1
2Providing and Fixing for MAPLE Hard Wood flooring including all labour and material Etc. Complete :-The Specification of the above maple hard wood flooring are as under Hard maple flooring- Provide and laying 20mm thick sports flooring, each individual strip of Hard Maple shall include the engraving of the MFMA (Maple Flooring Manufacturers Association) and manufacturing mill certification number.Minimum width of Hard Maple boards is 57mm and of random length, varying from 230mm to 1800mm, jointed together with the help of tongue and groove on all four sides of all boards.Substructure of Maple wood shall consist of Softwood batten, Substructure of maple wood flooring shall consist of sleeper of Spruce or Pinehaving63mm wide (minimum) length between 1220 mm(minimum) cross section of 38 mm (minimum) and laid perpendicular to the main flooring planks at a spacing 305mm centre to centre, including 19mm(minimum) thick shock pads/cushions at the maximum spacing of 10 ” centre to centre on each sleeper, Vapor Barrier:-0.20mm polyethylene membrane installed over the concrete base, beneath the flooring system as a vapor barrier between the concrete and wood floor. GYM FINISH-Machine sanding, 2 coat of oil modified Poly urethane Gym sealer and 1 coats of oil modified Poly urethane Gym sports finish in accordance with manufacturer specification, AND Game line marking in accordance with manufacturers specifications and project drawings etc complete to the entire satisfaction of Engineer-in-charge. 1. Wooden Flooring system shall be approved by Federated International Basketball Federation (FIBA),Badminton World Federation (BWF), International Handball Federation (IHF) certificates of such to be provided as evidence of such, 2. Floor Should Be certify By MFMA (Maple Flooring Manufacturers Association), 3. Flooring system should be certified by EN14904 or DINperformance standard., 4. Manufacturer to be certified in accordance with ISO9001:2000 standard- ISO certificate to be provided as evidence of such Wooden flooring Pads must be independently tested in accordance with Oxygen Aging Test and provide a result of 2.5% maximum variance in deformation at a average compression load of 4mm. Official test report to be provided as evidence of such.
3Supply of 75mm x 100mm rubber base molding to include air channeling in back of base to provide full ventilation of the sub-floor system.Fixed to the wall with a base molding adhesive as recommend by manufacturer
4Sanding and re polishing work on existing wooden sports flooring-Machine sanding and buffing onHard Maple floorwith coarse, medium, and fine abrasives to provide a smooth uniform surface. Apply 2cot of Connor oil modified polyurethene Gym Sealerand1 coat ofGym Finish and game line marking asper manufacturer’s instructions
5Anti termite treatment for wooden Sports flooring and periphery of concrete
6Self- levelling compound over existing undulated concrete sub base. Supply of 0-5 mm thick self levelling compound on existing undulated concrete sub-basewith special cement with fast setting and hydration together with graded silica sand resins and special additivesmixed with water,Consumption of material not less 1.6 kg/m2 per mm of thickness.
7Annexure :-2
8Supply of Badminton World Federation approved Portable synthetic floor whichconsist of 100% pure vinyl wear layer Badminton court size:-not less than= 8 mtr X 16 mtr = 128 sqm, Surface thickness should not less or more than 3 mm – 4mm, Surface treatment :- surface should be treated to reduce Skin burn, Surface texture :-Canvas Textureor equivalent for good grip, Installation system: - Easy & permanent installation solution to install badminton court with the help ofzip or Velcro system. Game lie marking: - Factory make game line marking & as per WBF Standard., Portable badminton court should approved By Badminton World Federation .
9Synthetic Sportsflooringfor indoor volleyball, basketball, handball, table tennis and badminton court for various stadium in MPProviding and layingSynthetic sports surface withtotal thickness of 12 mm thick, combining two layerinstallation with 5mmPolyoléfine foamand 7 mm thick synthetic floor whichconsist of 100% pure vinyl wear layer not less than 2 mm thick,protecsoland sanosol treated to reduce Skin burn with double fiber glass grid for sound stability on floorand 5 mm double density foam backingensuring highest possible resistance to indentation, durability and energy return, width of sheet not less than 1.5 Mjoined with seamless Hot welding.Laid with adhesive as per manufacturer’s instruction over existing leveled surface including game lines marking with following specification.Shock absorption under EN 14808 standard not less than 45%Ball bounce under EN 12235 standards not less than 90%Abrasion resistance as per EN ISO 5470-1 shall be < 350 mg.Friction coefficient as per DIN - 180320.4 - 0.6, Impact resistance as per DIN 18032 > 7 N/m., Sound isolation shall be > 23 dB. Special Conditions :-1. The above should be approved by following international federation. • International Handball Federation.(IHF) • Federation International Basketball Association, (FIBA)• Federation International Volley ball (FIVB)• WorldBadminton Federation ( WBF)2. The tenderer shall submit the warranty certificate from the Original manufactures for 10 years.
10International Volleyball, handball basketball and badminton Federation Approved Rollable mutipurpose Synthetic Sports flooring. Supply of International volleyball Federation approved Roll able Synthetic sports flooringnot less7 mm thick,whichconsist of 100% pure vinyl wear layer not less than 2 mm thick, withprotecsoland sanosol treated to reduce Skin burn with double fiber glass grid for sound stabilityon floordouble density foam backing ensuring highest possible resistance to indentation, durability and energy return, width of sheet not less than 1.5 Mjoined looselay installationwith 2 set of Double side tapeas per manufacturer’s instruction over existing leveled surface includingtemporary game lines marking with following specification.Shock absorption under EN 14808 standard not less than 25%Ball bounce under EN 12235 standards not less than 90%Abrasion resistance as per EN ISO 5470-1 shall be < 350 mg. Friction coefficient as per DIN - 180320.4 - 0.6,Sound isolation shall be > 23 dB Manufacturer Warranty should not less be than 5 year Surface should be used in one of the last two Olympic Games or world champion ship (in any of the sports for which the surface is being procured). • Synthetic flooring system should be approved by following international federation.International Handball Federation. (IHF)• Federation International Basketball Association, (FIBA)• Federation International Volley ball (FIVB)• Badminton World Federation (BWF)
11Synthetic Sportsflooringfor indoor volleyball, basketball, handball, table tennis and badminton court for various stadium in MPProviding and layingSynthetic sports surface withtotal thickness of 6 mm thick, synthetic floor whichconsist of 100% pure vinyl wear layer double density foam backing ensuring highest possible resistance to indentation, durability and energy return, width of sheet not less than 1.5 Mjoined with seamless Hot welding.Laid with adhesive as per manufacturer’s instruction over existing leveled surface including game lines marking with following specification.Shock absorption under EN 14808 standard not less than 45%Ball bounce under EN 12235 standards not less than 90%Abrasion resistance as per EN ISO 5470-1 shall be < 350 mg.Friction coefficient as per DIN - 180320.4 - 0.6, Impact resistance as per DIN 18032 > 7 N/m., Sound isolation shall be > 23 dB.Special Conditions :-1. The above should be approved by following international federation. • International Handball Federation.(IHF)• Federation International Basketball Association, (FIBA)• Federation International Volley ball (FIVB)• Badminton World Federation ( BWF)

AI Tender Summary

OUR REF NO 51758080
AUTHORITY Government Departments
TENDER VALUE 1 Crore
LAST DATE 03-11-2025
Authority
Authority Name Directorate Sports and Youth Welfare
Work Description Supply & Installation of Indoor Wooden Flooring & Badminton Court & Synthrtic Court Sarfes Ø; gsrqß njsa Wooden Flooring 2025 Ist Call E Tender For Supply And Installation Of Synthetic Wooden Flooring 2025 First Call , Annexure :-1 , Providing And Fixing For Maple Hard Wood Flooring Including All Labour And Material Etc. Complete :- The Specification Of The Above Maple Hard Wood Flooring Are As Under Hard Maple Flooring- Provide And Laying 20Mm Thick Sports Flooring, Each Individual Strip Of Hard Maple Shall Include The Engraving Of The Mfma (Maple Flooring Manufacturers Association) And Manufacturing Mill Certification Number.Minimum Width Of Hard Maple Boards Is 57Mm And Of Random Length, Varying From 230Mm To 1800Mm, Jointed Together With The Help Of Tongue And Groove On All Four Sides Of All Boards.Substructure Of Maple Wood Shall Consist Of Softwood Batten, Substructure Of Maple Wood Flooring Shall Consist Of Sleeper Of Spruce Or Pinehaving63mm Wide (Minimum) Length Between 1220 Mm(Minimum) Cross Section Of 38 Mm (Minimum) And Laid Perpendicular To The Main Flooring Planks At A Spacing 305Mm Centre To Centre, Including 19Mm(Minimum) Thick Shock Pads/Cushions At The Maximum Spacing Of 10 ” Centre To Centre On Each Sleeper, Vapor Barrier:-0.20Mm Polyethylene Membrane Installed Over The Concrete Base, Beneath The Flooring System As A Vapor Barrier Between The Concrete And Wood Floor. Gym Finish-Machine Sanding, 2 Coat Of Oil Modified Poly Urethane Gym Sealer And 1 Coats Of Oil Modified Poly Urethane Gym Sports Finish In Accordance With Manufacturer Specification, And Game Line Marking In Accordance With Manufacturers Specifications And Project Drawings Etc Complete To The Entire Satisfaction Of Engineer-In-Charge. 1. Wooden Flooring System Shall Be Approved By Federated International Basketball Federation (Fiba),Badminton World Federation (Bwf), International Handball Federation (Ihf) Certificates Of Such To Be Provided As Evidence Of Such, 2. Floor Should Be Certify By Mfma (Maple Flooring Manufacturers Association), 3. Flooring System Should Be Certified By En14904 Or Dinperformance Standard., 4. Manufacturer To Be Certified In Accordance With Iso9001:2000 Standard- Iso Certificate To Be Provided As Evidence Of Such Wooden Flooring Pads Must Be Independently Tested In Accordance With Oxygen Aging Test And Provide A Result Of 2.5% Maximum Variance In Deformation At A Average Compression Load Of 4Mm. Official Test Report To Be Provided As Evidence Of Such. , Supply Of 75Mm X 100Mm Rubber Base Molding To Include Air Channeling In Back Of Base To Provide Full Ventilation Of The Sub-Floor System.Fixed To The Wall With A Base Molding Adhesive As Recommend By Manufacturer , Sanding And Re Polishing Work On Existing Wooden Sports Flooring- Machine Sanding And Buffing Onhard Maple Floorwith Coarse, Medium, And Fine Abrasives To Provide A Smooth Uniform Surface. Apply 2Cot Of Connor Oil Modified Polyurethene Gym Sealerand1 Coat Ofgym Finish And Game Line Marking Asper Manufacturer’S Instructions , Anti Termite Treatment For Wooden Sports Flooring And Periphery Of Concrete , Self- Levelling Compound Over Existing Undulated Concrete Sub Base. Supply Of 0-5 Mm Thick Self Levelling Compound On Existing Undulated Concrete Sub-Basewith Special Cement With Fast Setting And Hydration Together With Graded Silica Sand Resins And Special Additivesmixed With Water,Consumption Of Material Not Less 1.6 Kg/M2 Per Mm Of Thickness. , Annexure :-2 , Supply Of Badminton World Federation Approved Portable Synthetic Floor Whichconsist Of 100% Pure Vinyl Wear Layer Badminton Court Size:-Not Less Than= 8 Mtr X 16 Mtr = 128 Sqm, Surface Thickness Should Not Less Or More Than 3 Mm – 4Mm, Surface Treatment :- Surface Should Be Treated To Reduce Skin Burn, Surface Texture :-Canvas Textureor Equivalent For Good Grip, Installation System: - Easy & Permanent Installation Solution To Install Badminton Court With The Help Ofzip Or Velcro System. Game Lie Marking: - Factory Make Game Line Marking & As Per Wbf Standard., Portable Badminton Court Should Approved By Badminton World Federation . , Synthetic Sportsflooringfor Indoor Volleyball, Basketball, Handball, Table Tennis And Badminton Court For Various Stadium In Mp Providing And Layingsynthetic Sports Surface Withtotal Thickness Of 12 Mm Thick, Combining Two Layerinstallation With 5Mmpolyoléfine Foamand 7 Mm Thick Synthetic Floor Whichconsist Of 100% Pure Vinyl Wear Layer Not Less Than 2 Mm Thick,Protecsoland Sanosol Treated To Reduce Skin Burn With Double Fiber Glass Grid For Sound Stability On Floorand 5 Mm Double Density Foam Backingensuring Highest Possible Resistance To Indentation, Durability And Energy Return, Width Of Sheet Not Less Than 1.5 Mjoined With Seamless Hot Welding.Laid With Adhesive As Per Manufacturer’S Instruction Over Existing Leveled Surface Including Game Lines Marking With Following Specification. Shock Absorption Under En 14808 Standard Not Less Than 45%Ball Bounce Under En 12235 Standards Not Less Than 90%Abrasion Resistance As Per En Iso 5470-1 Shall Be < 350 Mg.Friction Coefficient As Per Din - 180320.4 - 0.6, Impact Resistance As Per Din 18032 > 7 N/M., Sound Isolation Shall Be > 23 Db. Special Conditions :- 1. The Above Should Be Approved By Following International Federation. • International Handball Federation.(Ihf) • Federation International Basketball Association, (Fiba) • Federation International Volley Ball (Fivb) • Worldbadminton Federation ( Wbf) 2. The Tenderer Shall Submit The Warranty Certificate From The Original Manufactures For 10 Years. , International Volleyball, Handball Basketball And Badminton Federation Approved Rollable Mutipurpose Synthetic Sports Flooring. Supply Of International Volleyball Federation Approved Roll Able Synthetic Sports Flooringnot Less7 Mm Thick,Whichconsist Of 100% Pure Vinyl Wear Layer Not Less Than 2 Mm Thick, Withprotecsoland Sanosol Treated To Reduce Skin Burn With Double Fiber Glass Grid For Sound Stabilityon Floordouble Density Foam Backing Ensuring Highest Possible Resistance To Indentation, Durability And Energy Return, Width Of Sheet Not Less Than 1.5 Mjoined Looselay Installationwith 2 Set Of Double Side Tapeas Per Manufacturer’S Instruction Over Existing Leveled Surface Includingtemporary Game Lines Marking With Following Specification. Shock Absorption Under En 14808 Standard Not Less Than 25%Ball Bounce Under En 12235 Standards Not Less Than 90%Abrasion Resistance As Per En Iso 5470-1 Shall Be < 350 Mg. Friction Coefficient As Per Din - 180320.4 - 0.6, Sound Isolation Shall Be > 23 Db Manufacturer Warranty Should Not Less Be Than 5 Year Surface Should Be Used In One Of The Last Two Olympic Games Or World Champion Ship (In Any Of The Sports For Which The Surface Is Being Procured). • Synthetic Flooring System Should Be Approved By Following International Federation. International Handball Federation. (Ihf) • Federation International Basketball Association, (Fiba) • Federation International Volley Ball (Fivb) • Badminton World Federation (Bwf) , Synthetic Sportsflooringfor Indoor Volleyball, Basketball, Handball, Table Tennis And Badminton Court For Various Stadium In Mp Providing And Layingsynthetic Sports Surface Withtotal Thickness Of 6 Mm Thick, Synthetic Floor Whichconsist Of 100% Pure Vinyl Wear Layer Double Density Foam Backing Ensuring Highest Possible Resistance To Indentation, Durability And Energy Return, Width Of Sheet Not Less Than 1.5 Mjoined With Seamless Hot Welding.Laid With Adhesive As Per Manufacturer’S Instruction Over Existing Leveled Surface Including Game Lines Marking With Following Specification. Shock Absorption Under En 14808 Standard Not Less Than 45%Ball Bounce Under En 12235 Standards Not Less Than 90%Abrasion Resistance As Per En Iso 5470-1 Shall Be < 350 Mg.Friction Coefficient As Per Din - 180320.4 - 0.6, Impact Resistance As Per Din 18032 > 7 N/M., Sound Isolation Shall Be > 23 Db. Special Conditions :- 1. The Above Should Be Approved By Following International Federation. • International Handball Federation.(Ihf) • Federation International Basketball Association, (Fiba) • Federation International Volley Ball (Fivb) • Badminton World Federation ( Bwf)
Basic Detail
Tender No 7086/DSYW/INFRA/2025
Bidding Type Tender
Location
City bhopal
State Madhya Pradesh
Key Dates
Publish Date 30 Oct 2025
Submission Date 03 Nov 2025
Open Date 04 Nov 2025
Finance
Tender Value 1 Crore
Tender Fee 3000
EMD 3 Lakhs
Exemption Available
Document List
53f1ee80-ec98-4b2d-bf3b-ffd61914dc03.html
BOQ_537678.xls
ETenderforSupplyofIndoorW_1.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 30, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 03, 2025
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Nov 03, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Nov 04, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

53f1ee80-ec98-4b2d-bf3b-ffd61914dc03.html

xls

BOQ_537678.xls

pdf

ETenderforSupplyofIndoorW_1.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender