Repair/Renovation Of Rsq 8 At Rehari, Jammu. Cno- 321 Np; 1 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). 2 Chequerred ceramic pavit tiles 8 mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . 3 Cement plaster1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster . 4 Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar. 5 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand). 6 Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level. 7 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand). 8 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick. 9 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. 10 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats. 11 6 mm cement plaster of mix 1 : 3 (1 cement : 3 fine sand). 12 P/L/F 4mm App waterproofing treatment (primer and App sheet) with hot torch treatment and 2 coats pf aluminum paint included. Complete job. Roof 13 P/F Almirah with framework of 18 mm ISI approved plywood with both side lamination (outer decorative and inner plain white) and edge bending tape on croos sections, backing with 5 mm ACP sheet(white color), shutters made of 25 mm block board of standard make (ISI approved) with both side lamination (outer decorative and inner plain white) and fixed to frame with standard flush hinges and locking arrangement,Bright finished brass handles (100 mm), standard tower bolts (150 mm) and magnetic catcher on inner edge of framework. 14 Providing and fixing 5-8 mm Super heavy PVC Paneling of superior make on levelled wall surface including all necessary screws, fixtres, metal clips, angle corner and adhesives of required shade and color as approved by Engg. In charge. 15 Providing POP cornice on wall and ceiling junctions. 16 Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm. 17 Providing and fixing powder coated aluminum workin door windows ventilators, frames(chowkhats) and partition etc incl wire mesh, glass panes/ACP Sheet Silicon at junction with angular beadings incl hardware fittings with sliding/ hinged arrangementcomplete job as per the diection of E.I.C. (Ivory /Brown shade, Guage 16). 18 Engaging Carpentar 2nd class. 19 Providing and fixing of water proof flush door 34mm thick with 1.00 mm thick laminate (green, century or equivalent)/ veener on both sides including lipping, painting/ polishing, hinges, tower bolts, door stopper, mortize lock (harrison, godrej or equivalent). Complete. 20 P/F Vanity with counter top basin with waste coupling and waste pipe,CP mixer of standard make(Jaquar or equivalent, basin mounted) including drawers for storage, backlit looking glass of size 2x1.5. Complete job. 21 P/F CP brass angle valve15 mm nominal bore of Jaguar or equivalent make 22 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. Jaquar/Cera or equivalent. 23 Engagement of manpower. Labour
