Tender For Repair/ Replacement Of Boundary Wall, Retaining Wall, Fencing And Other Misc Works In The Area Of Shimla, Kufri, Sanjauli And Kelvin Grove Under Ge (I) Jutogh; 1 Demolition ofcement concrete in ground floors or pavingsnot exceeding 15cm thickness belowor above ground level complete all as specified and directed. 2 Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc Laid, bedded and pointed in any mortar, complete all as specified and directed. 3 M&L for 40 mm thick, PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in flooring finished even and smooth surface complete all as specified and directed. 4 M&L for 75mm thick, PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in sub base of flooring, complete all as specified and directed. 5 M&L for precast interlocking paver block glossy finish of any size and shape confirming to IS 15658-2006 of 80mm thickM-40 Grade with grey cement and pigment set, complete all as specified and directed. 6 M&L for sand filling 25mm thick under floors, below paver blocks or in foundation including watering and consolidation, complete all as specified and directed. 7 M&L for coloured chequred cement conc tiles (30cmx30cmx25mm thick) in grey cement and with pigment in floors etc , set and jointedin neat cement slurry, over and incl 20mm thick screed bed in CM 1:6, complete all as specified and directed. 8 Dismantling of floor hearth or wall tiling/ stone slab incl cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises, complete all as specified and directed. 9 M&L of wall cladding glazed ceramic tilesin vertical surfaces of size 350x250x7mm/ 450x300-350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing in to layer coat in CM 1:4, complete all as specified and directed. 10 Removing demolished/ excavated material/ soil exc 50m and depositing out of MoD land complete all as specified and directed. 11 M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in coping to retaining walls/ steps/ parapet/ kerbs/ base of railing post etc., including necessary formwork complete all as specified and directed. 12 M&L for raised pointing to random or polygonal rubble, uncoursed or brought up to coarse in CM (1:4) including raking out existing pointing etc., complete all as specified and directed. 13 Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. 14 M&L for plastering work 15 mm thick on fair surfaces of stone masonry, brick or concrete surfaces (1:4) to be finished even and fair (without using extra lime or cement) complete all as specified and directed. 15 M&L for applying two or more coats of 100% premium acrylic emulsion paint (weather proof paint on external surfaces) having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm over new surfaces at any height of building / tower complete all as specified and directed. 16 M&L for PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in foundation filling and mass concrete completeall as specified and directed.. 17 Demolition of brick or stone masonry built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and directed. 18 M&L for brick work with sub class B bricks old size straight or curved on plan built in CM 1:4, complete all as specified and directed. 19 M&L for walling of random rubble stone masonry, brought up to courses, well bonded, bedded and solidly hearted built in CM 1:6including raking or cutting outjoints complete all as specified and directed. 20 All as per Srl item No 19.00 above but except stone complete all as specified and directed. 21 M&L for PCC 1:3:6, type C-1, using 20mm graded crushed stone aggregate as bonder stone set in cement mortar 1:6, complete all as specified and directed. 22 S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. 23 S&F 5 mm thick plain poly carbonate translucent sheeting fixed withself tapping, screw and dismantling of old sheet complete all asspecified and directed. 24 Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed. 25 Excavating in post holes hard/ dense soil (or similar holes) each n. exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in hard/ dense soil, complete all as specified and directed. 26 S&F for mild steel framed work as in steel gate in such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars barred iron doors ladders framed balusters walk ways railings frame work of water tanks and similar work conforming to Fe 290.Gde -E-165 including all fittings and fixtures etc., complete all as specified and directed. 27 S&F roof trusses (framed) trussed, purlins, posts, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces cleats Fe 410-W (Gde-E- 250) quality-A etc., complete all as specified and directed. 28 S&F welded steel wire fabric weight(n.exc 4kg per sqm) complete to wood or steel members etc., complete all as specified and directed. Note: Weight shall be as certained by BOO as approved by GE. 29 M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in surface channel and drain etc., including necessary formwork and smooth fair finish complete all as specified and directed. 30 Dismantling plain or corrugated steel sheeting, with ridge, gutters, etc, any gauge, and thickness incl Nainital pattern roof covering, fixed with J/L hooks or coach screws complete all as specified and directed. 31 S&F pre-painted galvalume aluminium zinc coating GI based corrugatedsteel sheet 0.50mm thick having zinc coating 150grams per sqm (Az 150) of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. 32 S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick having zinc coating 150grams per sqm (Az 150) of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, eaves board fixed with self tapping screws, complete all as specified and directed. 33 M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 34 M&L for hand packing with boulders or stones (any thickness) at the back of walls over arches etc. and raising (or lowering) to the required level, complete all as specified and directed.
