Tender For Repair To Misc B/R Items In Hq Swc And Zone-I Area Under Age B/R-I Of Ge Jaipur; 1 M&L preparing old decorated surface of walls including brooming down and cleaning the surfaces and and applying one coat of oil bound distemper of approved tint using hand roller /brush complete all as specified and as directed 2 M&L for complete removal of exising treatment on wall and applying 2mm thick wall care putty including sand paper gentle rubbing to obtain smooth surfaces complete all as specified and as directed 3 M&L for applying akali resistant priming paint coat on internal surfaces of wall using jet spraying/ roller complete all as specified and as directed. 4 M&L for applying two coats oil bound distemper of approved tint on wall surfaces using hand roller /brush over primed surface complete all as specified and as directed. 5 M&L preparing old decorated surface of ceiling including brooming down and cleaning the surfaces and and applying one coat of oil bound distemper of approved tint using hand roller /brush complete all as specified and as directed 6 M&L preparing old decorated surface of ceiling including brooming down and cleaning the surfaces and and applying two coats of oil bound distemper of approved tint using hand roller /brush complete all as specified and as directed 7 M&L for complete removal of exising treatment on wall including sand paper gentle rubbing to obtain smooth surface and applying two coats of water based premium acrylic smooth exterior emulsion paint, 1st quality with Anti Algal properties (company depot tinted) of approved manufacturers in required colour and shade using hand roller as per manufacturer instructions complete all as specified and directed. 8 M&L for applying akali resistant priming paint coat on external surfaces of wall using jet spraying/ roller complete all as specified and as directed. 9 M&L preparation of old decorated surfaces of walls, pillars and cornices, including brooming down and cleaning the surfaces and applying one coat of plastic emulsion paint (Glossy) of approved manufacturers in required shade complete all as specified & as directed.Note : Work will be executed upto 20 mtr height and all necessary T&P reqd for approaching material, exectuion of work and saftey equipment for labour shall be included in quoted rates. 10 M&L for preparation of new wooden or wood based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 11 M&L for preparation of new or previously untreated steel and iron surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. 12 M&L for preparation of old painted surfaces of wood or wood based materials of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 13 M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat ofwood filler on new works with two or more coats complete all as specified and directed. 14 M&L preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified & as directed. 15 M&L for thoroughly clean the floor with wire brush and clean with water, romoving loose paint, dust and grime, address any cracks or dampness issues by reparing and applying two coats of super gloss enamel floor paint (Suitable for floor) over a coat of self priming coat after suitable interval as per manufacturers instruction complete all as specified and directed. 16 Demolition of stone slab and tiles of any description or thickness in floor aprons etc laid bedded and pointed in any mortar complete all as specified and directed . 17 M & L machine cut kota stone slab 20-25mm thick, size of kota stone 400x400 mm in flooring laid over and including cement screed base 15mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. 18 M & L machine cut kota stone slab 20-25mm thick on vertical surface of wall, riser, steps, skirting, dado and pillar etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 10 mm thick cement plaster in CM 1:4 including rubbing and polishing complete all as specified and directed 19 M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. 20 M & L for 20mm thick Granite (of any type) work(table rubbed and polished) for wall lining(veneering towall) 12mmthickin cementmortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. 21 M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete and cleaning of the floor complete all as specified and directed. 22 Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. 23 M&L for brick work with sub-class B bricks (old size), straight or curved on plan exc 6m mean radius built in In cement mortar 1:4 complete all as specified and directed 24 Taking down cement plaster or cement lime plaster, any description on brick, stone walls or concrete surface of ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed 25 M&L rendering 15mm thick in CM 1:6 on stone masonry surfaces or on surface other than fair faces of brick masonary finished even and smooth without using extra cement complete all as specified and directed. 26 M&L for rendering 15 mm thick in two layers, Ist layer 10 mm thick in CM 1:4 and IInd layer 5 mm thick in CM 1:4 incl mixing of WPC as per manufacturers instruction, on fair faces of brick masonary or concrete surfaces of wall, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.Note : WPC shall be measured and paid seperately 27 M&L for rendering 10 mm thick in CM 1:3 on concrete surface of ceiling finished even and smooth w/o using extra cement complete all as specified and directed. 28 M&L for preparing newly plastered surfaces of ceiling etc and applying two coats of distemper with distemper oil emulsion of approved tint over a coat of primer complete all as specified and directed. 29 M & L for preparation of new plastered wall surfaces and applying two coats of water based premium acrylic smooth exterior emulsion paint, 1st quality with Anti Algal properties (company depot tinted) of approved manufacturers in required colour and shade using hand roller as per manufacturer instructions complete all as specified and directed. 30 M&L for preparing newly plastered surfaces of wall etc and applying two coats of distemper with distemper oil emulsion white or tinted over a coat of primer complete all as specified and directed. 31 M&L for preparation of newly or previously untreated steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. 32 S&F in repair 100mm dia CP stainless steel grating including jointing with solvent cemet complete all as specified and as directed. 33 Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed. 34 Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed. 35 S & F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and incl either hooks and pintal hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete confirming to Fe-290 Gde-E-165 complete all as specified and directedNote:- Cost of welding butt hinges to the door frame deemed to included in quoted rate also adjucent area damage during fixing door frame will be repair by contractor without any extra cost. 36 S & F 35mm thick factory made plain framed, panelled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710.The size of rails and style shall be as per IS-1003(Part I) complete as directed and specified. 37 S & F 35mm thick factory made second class hardwood glazed and skelton door shutter kiln seasoned and chemically treated, open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete.The size of members of shutters shall be as specified in MES SSR Part-I complete as directed and specified. 38 S&F 30 mm thick Flush shutters, factory made, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed 39 S & F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with 19 X 19mm MS square tube of 1.25 mm thickness. The profile shall be mitre cut at two corners and joined by inserting 2nos. of 150mm long brackets of 15x15mm M.S. square tube inside the 19mm x 19mm M.S. square tube and suitably screwed, suppling & fixing in opening as per specification & drawing given in SSR Part-I complete all as directed and specified. 40 S&F of Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed. 41 S&F 300mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. 42 S & F 150mm long mild steel pressed handles oval type stove enamelled black complete as directed and specified. 43 S & F 200mm long mild steel barrel tower bolt stove enamelled black with bright bolt and fixed complete as directed and specified. 44 S & F 100mm butt hinges medium weight cold rolled mild steel and fixed complete as directed and specified. 45 S & F 150mm size (overall length of cover plate) floor door stoper of aluminium alloy body and tongue, anodised, with double pin and rubber shoe fixed in bottom of door shutter complete as directed and specified. 46 S&F galvanised mild steel wire cloth 0.63 mm nominal dia of wire & average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete as directed and specified. 47 S & F in repair galvanised mild steel wire cloth 0.63 mm nominal dia of wire & average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete as directed and specified. 48 S&F 150 mm long aluminium anodised barrel tower bolt extruded section and fixed complete all as specified and directed. 49 S & F 150mm long handles, extruded aluminium alloy, fabricated type anodised complete all as specified and directed. 50 Hacking out old broken glass (any thickness, size quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and directed. 51 S&F sheet glass 3.00mm thick ordinary quality and glazing with and incl silicon in square n.exc 0.5 Sqm in each pane complete all as specified and directed. 52 M&L for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators, Partion section with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. 53 M & L powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beadingscrews etc. complete all as specified and directed. 54 M&L in repair for 09 mm thick prelaminated particle board interior grade, prelaminated both side with decorative choice laminationfixed with screw complete all as specified and directed. 55 S&F 5.5 mm thick Sheet glass, ordinary quality and glazing with and incl EPDM gasket in Aluminium window / doors in square exc 0.5 sq. m in each pane complete all as specified and as directed. 56 M & L for neoprene beading required for fixing loose or broken glass in window and door panel of any nature including taking down and fixing door and window panel in frame complete all as specified and directed. (Note : Glass will be measured andpaid separately) 57 S & F in repair window blinds open and close verticaly or horizonatly with the help of adjustment rope on tube (roller), madeup of good fabric, plastic or other good material best locally available in market including all necessary assesories for installation and making good the surface complete all as specified and as directed. 58 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. 59 S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways;drainage crossings, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed 60 M & L in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed 61 S&F in repair Door closer aluminium anodized extruded section body, hydraulically regulated designation No-3, universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and as directed. 62 S&F in repairs PVC valveless, syphonic action type flushing cistern, low level, 10 ltr capacity, white, with intel, ball valve, float and handle including brakects, 32 mm dia polyethylene of low or high density or PVC flushing pipe and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified & as directed 63 Dismantling old unserviceable RCC / PVC water tank of capacity exc 250 ltr but n exc500 ltr & removal from site complete all as specified and directed 64 Dismantling old unserviceable RCC / PVC water tank of capacity exc 500 ltr but n exc1000 ltr & removal from site complete all as specified and directed 65 S&F 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc complete all as specified in SSR Part I and directed by Engr-in-charge. 66 S&F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc complete all as specified in SSR Part I and directed by Engr-in-charge. 67 S & F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20mm dia complete all as specified and directed.Note : Min weight for 15mm - 210gm 68 S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed 69 S&F in repair PVC Connections 15mm size, 450mm long with PTMT nuts complete all as specified and as directed. 70 S&F in repair vitreous china squatting pan, Orissa patteren, size 580 x 440 mm, white, with integral foot rests including P or S trap (excluding flushing cisteren and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.including trap set in concrete complete all as specified & directed. 71 S&F in repair vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and including waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement incl union for discharge pipe incl PVC waste pipe complete all as specified and directed. 72 S&F in repairs vitreous china wash hand basin with pedestal white flat back size 550 x 400 mm excluding taps, waste pipe, chain & plug and porcelene stopper but including brackets /fastners, brass chromium plated waste coupling, cutting for and pinning in ends of brackets, fixing of pillar tap complete all as specified and directed. 73 S&F in repair brass mortice lock, vertical type, size 65mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified fixed 74 Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubish off the premises complete all as specified and directed. 75 M&L colouredNon Skid joint freeceramic tiles7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,in floors etc. set over 15mm thick screed in CM 1:6and jointed in neat cement slurry and pointed in white or coloured cement to match 76 M & L for Glazed Coloured Ceramic tiles in vertical surface450x350x7mm thick jointless set and joint using tile adhesive and pointed in white or colour cement to match over and including 10mm thick plaster in CM 1:4 as backing coat to receive tiles complete all as specified and directed. 77 M&L for light shade double charge/ultra full body vitrified ceramic tiles 10mm thick (square / rectangular) area of each tile exc 0.42 sqm but not exceeding 1.00 sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as approved and directed 78 M&L for light shade double charge/ultra full body vitrified ceramic tiles 10mm thick (square / rectangular) area of each tile n exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as approved and directed 79 M&L for light shade double charge/ultra full body vitrified ceramic tiles 10mm thick (square / rectangular) area of each tile n exc 0.36 sqm on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering in CM 1:4 complete all as specified & directed. 80 S & F in repair EWC seat cover slow fallen of coloured match to existing EWC etc all as specified and directed. 81 Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pin/spring/ clip complete all as specified and directed. Note : Work will execute upto the height of G+ 4 story bldg, outer side sturctural glazing area, all necessary approaching, working and saftey kit are arrange by contractor without any extra cost 82 S & F 6mm thick laminated toughened glass coated with necessary film and fixed in structural glazing structure with necessary screw and fill the gap with silicon complete all as specified and directed. Note : Work will execute upto the height of G+ 4 story bldg, outer side sturctural glazing area, all necessary approaching, working and saftey kit are arrange by contractor without any extra cost 83 S & F 6mm thick froasted toughned glass for urinal partition terminating about 40cm above floor line, fixed with suitable SS clamp incl all necessary accesories for fixing complete all as specified and directed. 84 S&F 12mm thick clear toughened glass in fixed in existing door / window/ partition etc incuding all necessasry fixing arrangement complete all as specified and directed. 85 M&L for taking out existing Automatic sliding glass door sensor (Dorma system), repairing, servicing and refixing in same position complete all as specified and directed. 86 S & F in repair sensor of Dorma system automatic sliding glass door in existing door complete all as specified and directed. 87 S & F in repair big roller of Dorma system automatic sliding glass door in existing door complete all as specified and directed. 88 S & F in repair track profile of Dorma system automatic sliding glass door in existing door complete all as specified and directed. 89 S&F as in repair fancy type, chromium plated jet spray suitable for EWC complete all as specified and directed. 90 M&L for 15mm Dholpur stone cladding gang saw cut with macnine cut edges, uniform colour of each stone size 200mm X 100mm X 15mm fixed on vertical surface (front, side, bottom & top) fixed with neat cement slurry mixed with latricate adhesive including providing 8mm wide groove filled with latricate adhesive grouting and polishing, rubbing & including silicon treatment complete all as specified and directed.Note : Work will execute in patches upto the height of G+ 4 story bldg on outer side cladding work area, all necessary approaching, working, scafolding and saftey kit are arrange by contractor and same shall be included in quoted rates. 91 M&L for 16 to 18mm Dholpur stone cladding gang saw cut with macnine cut edges, uniform colour of each stone size exceeding 0.50 sqm fixed with and including one mumber SS clamps (grade-202) of flat 30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fasterner, polishing,rubbing & including silicon treatment complete all as specified and directed.Note : Work will execute in patches upto the height of G+ 4 story bldg on outer side cladding work area, all necessary approaching, working, scafolding and saftey kit are arrange by contractor and same shall be included in quoted rates. 92 S & F in repair 150mm long extruded Brass handles, fabricated type polished complete all as specified and directed. 93 S & F in repair 200mm long extruded Brass handles, fabricated type polished complete all as specified and directed. 94 S & F as in repair 150mm long Brass barrel tower bolt, barrel of extruded section, rolled or cast bolt and fixed complete all as specified and directed. 95 S & F as in repair 200mm long Brass barrel tower bolt, barrel of extruded section, rolled or cast bolt and fixed complete all as specified and directed. 96 S&F as in repairs 300mm long Brass sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed. 97 S & F in repair 150mm long handles, extruded aluminium alloy, fabricated type anodised complete all as specified and directed. 98 S&F in repair 75mm long (overall length of cover plate) floor door stoper of aluminium alloy body and tongue, anodised, with double pin and rubber shoe fixed in bottom of door shutter complete as directed and specified. 99 M&L in repair 75mm long (overall length of cover plate) brass door stoppers with two rubber shoes complete as directed and specified. 100 S&F in repair 150 mm long aluminium anodised barrel tower bolt extruded section and fixed complete all as specified and directed. 101 M&L in repair 100mm size Butt hinges extruded aluminium alloy with galvanised mild steel hinges pin, anodised and fixed, type-B-21 complete as directed and specified. 102 S&F in repair 100mm Butt hinge extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed. 103 S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and connection to drain (or out going pipe) and to flushing pipe etc. incl trap set in cement concrete complete all as specified and directed. 104 S&F in repair toilet paper holder of Vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. 105 S&F in repair tubular towel rail, brass chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. 106 Dismantling wall and ceiling board or insulation board etc, any thickness including snap grid frame, cover fillets etc complete all as specified and as directed. 107 Providing & Fixing ofMineral Fibre Acoustical Suspended Ceiling System with Dune Tegular 24 Edge Tiles of 16mm thickness and Prelude 24mm face exposed grid. The tiles shall have sand texture visual with acoustical punchers, Humidity Resistance (RH) of 99%, NRC 0.5 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, CAC of 33db as per ASTM E1414, Light Reflectance ≥85% as per ASTM E-1477, Thermal Conductivity k = 0.052 - 0.057 W/mK, Colour Global White, Fire Performance of class 0/1 as per BS 476 Part 6/7 and Class A as per ASTM E84 with Board edge in module size of 600 x 600mm. It shall be suitable for Green Building application, with Recycled content of up to 41%. The tile shall have certifications from GRIHA and GreenPro thereby confirming that it is an environment friendly product. SUSPENSION: The tile shall be laid on Prelude 38 with 24 mm wide T - section flanges colour global white (matching to tile colour) having roll formed double stroke rotary stitching on all T sections i.e., the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm (all sections). The deflection loading of the system shall be 15 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 18kg/m. The end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull-out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel of 90 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability. INSTALLATION: To comprise main runner spaced at 1200mm securely fixed to the structural soffit using suspension system (specifications above) at 1200mm maximum. The First/Last suspension system at the end of each main runner shall not be greater than 450mm from the adjacent wall along with the first and the last main beam shall be at less than 600mm from the wall.Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm to form 1200 x 600 mm module.Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees.Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls using screws at 450mm centre to centre maximum. Installation shall be carried out as per recommended procedure.SUSPENSION SYSTEM accessories supplied byconsisting of M6 Anchor Fasteners with hanger hole, pre-straightened hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs. (Optionally, adjustable hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment during installation purpose in main runners). 108 ,--ditto-- all as per item No 107 above but except grid frame and hanger complete all as specifie and directed. 109 M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size complete all as specifie and directed.Note : Work to be executed in patches whereever required as per site in reqd pattern. 110 S&F in repair electronic flushing sof make cera / RAK complete incl sensor, replacement of sonat valve, battery box suitable for urinals flat back with intergrated EFS coloured size 360mmx330mmx 740mm of CERA cat part No 5005A complete all as specifie and directed.Note : The replacement and repair of sensor will be done through authorised dealor/agent of of the company. 111 S&F as in repair electronic flushing system kits of make cera / RAK complete incl sensor, replacement of sonat valve, battery box, range Efs DC suitable for integrated urinal pot of parryware Cat Part No C-8098 or equivalent complete all as specified and directed.Note : The replacement and repair of sensor will be done through authorised dealor/agent of of the company. 112 S & F 18 mm thick HDHMR (High density high moisture resistant) board one side white laminate and other side decorative as in modular kitchen/ cabinets/door shutter fixed with and incl minifix hardware where ever required including edge band 22 mm wide 0.80 m thick(of pearlwood or equivalent)of matching colour on exposed surfaces of board fixed with polymaster adhessive of REHAU make or equivalent including trimming edges of edge band to true line of thicknesss of board by manual trimmer, fixed to wall etc complete all as directed 113 S & F 8 mm thick HDHMR (High density high moisture resistant ) board of both side white laminate as in back of kitchen cabinets/partion of cupboard etc.complete all as directed 114 S & F auto close hinges, stainless steel of grade SS-304, bright finish, for cabinet of 1.5mm thickness and fixed complete all as specified.Make : Godrej, Hindware, Lifetime or equivalent 115 S & F stainless steel handles of size 100 mm fancy type of approved make and fixed complete all as specified & directed.Make : Godrej, Hindware, Lifetime or equivalent 116 M & L for reparing seepage, blockage in drainage line inside bldg area above or below the floor including necessary reparing by jointing mtrl m-seal, white & black cement etc and running the drain line all as specified and directed.Note : Work will executed upto G+4 story building, all necessary scaffolding and saftey equipment to labour will provided by contractor and included in quoted rates 117 Taking up or down 15 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed. 118 Taking up or down 20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed. 119 Taking up or down 25mm to 32mm steel tubingand connections including cleaning for refixing or removal complete all as specified and directed. 120 S&F 15 mm dia steel water tubing, galvanized, medium grade, with all fittings,fixed to walls and ceiling or in floor complete all as specified and directed. 121 S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings,fixed to walls and ceiling or in floor complete all as specified and directed. 122 S&F 25 mm dia steel water tubing, galvanized, medium grade, with all fittings,fixed to walls and ceiling or in floor complete all as specified and directed. 123 S&F 32 mm dia steel water tubing, galvanized, medium grade, with all fittings,fixed to walls and ceiling or in floor complete all as specified and directed. 124 S & F in repairs 15mm bore pillar tap, long body cast copper alloy, chromium plated, fancy type with capstan head, screwed down, high pressure with or without lettered Hot or Cold with long screwed shank and fly nuts screwed for iron pipe complete all as specified and directed. 125 S&F as in repair 15 mm bore two way bib tap, cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 126 S&F in repair 15 mm angle/stop valve, fancy type, chromium plated, cast copper alloy, with long shank and cup (concealed type) screwed down, high pressure with crutch or butter fly handle, screwed for iron pipe or for unions complete all as specified and directed. 127 S&F in repair vitreous China white single piece WC (European type) incl inbuilt vitreous china cistern size 360X640X680mm and and cover and mild steel chromium plated or aluminised hinging device and connection to drain (or out going pipe) all as specified and directed. 128 M & L in repair vitreous china urinal italian collection (including all fixing arrangement joint etc and connection pipe from angle valve to urinal) complete all as specified and directed 129 M & L in repair vitreous china WHB, Oval type, italian collection (including all fixing arrangement joint etc, Cutting to Granite and RCC base if reqd) complete all as specified and directed 130 M & L in repair crumple joint of bldg at (Colunm, beam etc)teartment with high performance compressible expension joint PE fillier board, ISI marked polymeric filled board confirming to IS 1838 Part 3 and as per manufacturer instruction and placed new aluminium sheet of dimension 100x3000mm (each sheet) with and incl self tapping screws upto the height of bldg upto 20 mtr incl all necessary scaffolding and saftey equipments complete all as specified and directed. 131 S&F in repairs 15 mm bore bib tap, fancy type, chromium plated cast copper alloy with cruth or butter fly handle screwed down, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. 132 S&F in repair 15mm bore stop/angle valves, cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed for iron pipes or for unions and fixed complete all as specified and directed. 133 S&F in repair 75 mm bore UPVC (SWR) drainage pipes (type B conforming to IS-13592) single socketed in any length with rubber ring joints laid in trenches or floors complete all as specified & directed. 134 S&F in repair 110 mm bore UPVC (SWR) rain water pipes (type A conforming to IS-13592) single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed. 135 S&F in repair 110 mm bore UPVC (SWR) drainage pipes (type B conforming to IS-13592) single socketed in any length with rubber ring joints fixed to walls incl brackets complete all as specified & directed. 136 S&F in repair 75 mm bore UPVC (SWR) drainage pipes (type B conforming to IS-13592) single socketed in any length with rubber ring joints fixed to walls incl brackets complete all as specified & directed. 137 S&F 75 mm dia UPVC (SWR) bends any radius complete all as specified and as directed. 138 S&F 110 mm dia UPVC (SWR) bends any radius complete all as specified and as directed. 139 Disconnecting existing tank of capacity exc 250 and not exc 500 litre, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required, reconnecting and re-fixing in position including cleaning and removing all scale and dirt etc from water tanks and from mouths of circulating pipe etc, mention date of cleaning on the tank by shethitic enamel paint complete all as specified and directed. 140 M&L for cleaning of RCC over head tank of capacity exc 15000 ltr and n exc 30000 ltr by scrapping the floor and wall surfaces, removing the all scale and dirt, cleaning with chemical and washing with clean water, mention date of cleaning on the tank by shethitic enamel paint complete all as specified and directed.Note : (i) All saftey precaution like oxygen cylinder, ladder, head light cap, wire brush, glubbes and mask etc will be provided by cotractor for labour during the time of cleaning and shall be included in quoted rates 141 Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule A/BOQ
