|
| 1 | Epoxy painting on plastered/concrete surfaceProviding and Painting with Epoxy paint at all locations prepared and applied as per manufacturer\" specifications including a priming coat if specified by the manufacturer , preparation of surface and etching with 10% commercial Hydrochloric acid wherevernecessary and neutralizing the acid etched areas by washing with 5% solution of soda ash neatly and washing with sufficiant water, after first coat Epoxy based trowelling compound if required, including preparation of the surface by scrapping, applying sand paper, filling the holes, joints, cracksif any,scaffolding etc. complete.all asper manufacturers Technical Data and as directed at site toacheive 200 micron dry film thickness (50 micron primer coat and 150 micron finishing coat). ON CONCRETE/PLASTERED SURFACES |
| 2 | Premium plastic emulsion paint Providing and applying wall painting two coats on new work with premium plastic emulsion paint of approved brand to give an even shade, including a coat of approved cement primer, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge |
| 3 | Velvet paintProviding, applying wall painting twocoats with Velvet paint of approved brand to give an even shade over acoat of cement primer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge |
| 4 | White cement based wall puttyProviding and applying white cement based wall putty of approved make over concrete or Plastered surfaceup to 3 mm thickto get uniform surface free from undulationincluding cleaning complete all as directed by the Engineer-in-charge |
| 5 | Synthetic enamel paintProviding and Painting twocoats of synthetic enamel paint on steel surfaces/concrete surface of approved brand and manufacture to give an even shade over a suitableprimer coat of Zinc Chromate .including preparation of the surfaces, providing and fixing scaffolding wherever required complete as per specifications and as directed by the Engineer-in-charge |
| 6 | Painting of 25mm Dia G.I pipePainting 25mmG.I pipes with 2 coats of synthetic enamal paintof approved colour over a coat of approved Zinc Chromate Primer all as per specifications and as directed by the Engineer-in-charge. |
| 7 | Painting of 50 mm Dia G.I pipePainting 50mm G.I pipes with 2 coats of synthetic enamal paintof approved colour over a coat of approved Zinc Chromate Primer all as per specifications and as directed by the Engineer-in-charge. |
| 8 | Painting of 80mm Dia G.I pipePainting 80mm G.I pipes with 2 coats of synthetic enamal paintof approved colour over a coat of approved Zinc Chromate Primer all as per specifications and as directed by the Engineer-in-charge. |
| 9 | Painting of 100mm Dia G.I pipePainting 100mm G.I pipes with 2 coats of synthetic enamal paintof approved colour over a coat of approved Zinc Chromate Primer all as per specifications and as directed by the Engineer-in-charge. |
| 10 | Double Tubular scaffolding system Providing and fixing double tubular scaffolding system using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding |
| 11 | Elastomeric water proofexterior paint Providing and painting walls with (TWOcoats) of approved shade of high build protective , elastomeric water proofexterior gradepaintof approved make of required shade, minimium dry film thickness of 250 microns acheived in two or more coats / as per manudacturer\"s specifications including preparation of the surfaces by scrapping / wire brush, scaffolding complete. Primer coat will be with approved make with water in ratio of 1:2and 2 coats of finishing coat without water all as directed byEngineer-in-charge. . |
| 12 | Self levelling Epoxy flooringProviding and laying 3mm thickness Self levelling Epoxy flooring , including preparation of the surface, primer coat,screeding & levelling coat and finishing coat with Polyurethene coat of approved colour and shade of approved make all as per manufacturers specifications complete as directed at site by the Engineer-in-charge (This Job to be carried out through a specialized approved agency) |
| 13 | Self-adhesive glow Night Tape-Providing and fixing of Self-adhesive glow Night Tape Only Arrow - Emergency Route Showing -a size of 50mm width of approved make etc complete as per specification and as directed by Engineer-in-charge. |
| 14 | Polysulphide compound-Providing and applying Polysulphide compound in “V” grooves of 10 mm size for sealing gaps for airtight-ness including applying a coat of primer,cutting and making the existing cracks in V shape of required depth, scaffolding etc to be completed generally as per specifications and directed by EIC. |
| 15 | 2.00 mm thick PVC sheet / tile in flooringProviding and Fixing Homogeneous 2.00 mm thick PVC sheet / tile in flooring and skirting of approved make in approvedpattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturerincluding, levelling small undulations with plasterof paris if required , rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-in-charge in approved colour and shade. |
| 16 | 3.00 mm thick PVC sheet / tile in flooringProviding and Fixing3.00 mm thick Homogeneous PVC sheet / tile in flooring and skirting of aproved make in approvedpattern on a smooth and damp prrof base using rubber based adhesive of approved quality and manufatrer like Dunlop-S -758, Fevicol SR 998, PolyGrip SP orequivalent including levelling small undulations with plasterof paris if required, rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-in-charge in approved colour and shade. |
| 17 | Removing pvc flooring of 2mm and/or3mm thickness form various floor areasand disposing the old pvc flooring to the nearest disposal point within 100m lead. |
