}

Procurement Of Material For Work, muthalamada-Kerala

Grama Panchayat has published Procurement Of Material For Work. Submission Date for this Tender is 21-10-2025. Construction Material Tenders in muthalamada Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

51736021
Procurement Of Material For Work
Tender
Indian
Kerala
Muthalamada
21-10-2025

Tender Details

Procurement Of Material For Work-2 Stone Aggregate(single size): 40 mm nominal size 3 Stone Aggregate(single size):20 mm nominal size 4 Coarse sand (zone III) 5 Portland Cement 6 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper 7 Vibrator (Needle type 40 mm) 8 Sundries 9 wall form panel 1250x500 mm 10 Corner angle 45x45x5 mm 1.50 m long 11 100 mm channel shoulder 2.5 m long 12 Double clip (bridge clip) 13 Single clip 14 M.S. Tube 40 mm dia 15 Twisted steel/deformed bars 16 Stone Aggregate(single size): 10 mm nominal size 17 Stone for masonry work 18 Solid blocks of size 30x20x20cm 19 Wall form panel 1250x450xmm 20 Corner angle 45x45x5 mm 2.50 long 21 Column clamp 450x1070 mm 22 Prop 2 m (2-3.5m) 23 Structural steel such as tees, angles, channels and R.S. joists 24 Red oxide Zinc chromate primer 25 Adjustable telescopic prop 3 m (2.02-3.75m) 26 Beam clamp 300-380 mm (450-1070 mm) 27 Second class kail wood in planks 28 Second class kail wood in scantling 29 Hollock ballies 125 mm diameter 30 Adjustable span ESO+SI (2.35-3.40) 31 Solid blocks of size 30x20x15cm 32 Mild steel tubes electric resistant or induction butt welded 33 Mild steel round bar 12 mm dia and below 34 Flats up to 10 mm in thickness 35 Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm 36 Factory made glass reinforced plastic door frame 90x45 mm i/c carriage 37 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage 38 Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm 39 Bright finished or black enameled mild steel screws 40 mm 40 Bright finished or black enameled mild steel screws 20 mm 41 Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) 42 PVC pipe 110 mm outer dia 6kgf/cm2 43 PVC pipe 15 mm outer dia 10kgf/cm2 44 PVC pipe 32 mm outer dia. 10Kgf/cm2 45 PVC pipe 40 mm outer dia. 10kgf/cm2 46 PVC pipe 63 mm outer dia . 6kgf/cm2 47 PVC vent cowl 63 mm dia 48 PVC vent cowl 110 mm dia 49 Brass bib-cock-15 mm dia 50 PVC Elbow 63 mm dia 51 PVC 45 degree Elbow 63 mm dia 52 PVC door Elbow 63 mm dia 53 PVC bend 63 mm dia 54 PVC Tee 63x63x63 mm dia 55 PVC Socket/coupling 63 mm dia 56 PVC Elbow 110 mm dia 57 PVC 45 degree Elbow 110 mm dia 58 PVC door Elbow 110 mm dia 59 PVC bend 110 mm dia 60 PVC Tee 110x110x110mm dia 61 PVC Socket/coupling 110 mm dia 62 PVC pipe 25 mm outer dia . 12 kgf/cm2 63 Vitreous China orrisa type w.c. pan size 580 mm 64 Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) 65 100 mm S.C.I. trap with vent heel 66 Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers 67 Vitreous china pedestal type wate closet 68 Vitreous china flat back wash basin 550x400 mm 69 15 mm C.P.brass tap 70 C.P. brass waste 32 mm 71 C.I. bracket for wash basin and sinks 72 Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm 73 Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings 74 Polyethylene water storage tank with cover and suitable locking arrangemnet 75 Fine sand (zone IV) 76 Vitrified floor tile 60x60 cm 77 Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black 78 Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. 79 Multi surface paint 80 Special primer (C.W) 81 Black Japan 82 Synthetic enamel paint in black or chocolate shade 83 Mild steel plates 84 G.I. pipes 40 mm dia 85 Mild Steel round bar above 12 mm dia 86 Welding by electric plant 87 Stainless steel (Grade - 304) hollow section round/square tubes 88 Stainless steel bolts /square bar and plates 89 Interlocking C.C. paver block (80 mm thick, M-30) 90 Stone Aggregate(single size): 06 mm nominal size

Key Value

Document Fees
INR 5000 /-
Tender Value
Refer document

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents-1 0 KB
Click here to download tender document Tender Documents-1 0 KB
Click here to download tender document Tender Documents-1 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail