Tender For Maintenance & Repair/Replacement To Certain Wooden furniture And Steel Furniture Under Ge East Bareilly; 1 WODDEN FURNTIRE 2 Notes applicable to Sl item Nos 2.00 to 18.05 :-(a) Removal of following existing unserviceable wooden components of various furniture items or similar items carefully without disturbing the adjoining parts and S&F of new components in lieu of dismantled components including tightning the joints, pinning, screwing, nailing, wedging, glueing, providing hinges, placing every part intact the disturbed portion as applicable as per drawing and as directed by Engr-in-Charge.(b) The timber shall be of 1st class seasoned hardwood teak. 3 Chair Dinning Cushioned Drg No. FD/E6/MAP/10(R) 4 (a) Rear leg 5 (b) Front leg 6 (c) Side/back/front rail 7 (d) Back strip 8 (e) Stiffener 9 (f) PVC Shoe 10 (g) M&L for providing 82 mm thick new cushion of appropriate size of 40 density cool foam (Make Sleepwell Primo Cool/ Kurlon/Godrej or equivalent) duly covered with tapestry cloth and fixed on 12 mm thick plywood sheet complete with dismantling of old unserviceable one. Note: Cost of tapestry cloth shall not be less than Rs. 450/- per RM (Make DCM/ Reliance/ S Kumar or equivalent) and shall be as per sample approved by GE. The sample of cloth is kept with BSO GE (East) Bareilly. 11 (h) M&L for providing new tapestry cloth cover for cushion of approved shade & quality as per sample approved by GE to cover the foam of appropriate size and dismantling of old one. Note: Cost of tapestry cloth shall not be less than Rs. 450/- per RM (Make DCM/ Reliance/ S Kumar or equivalent) and shall be as per sample approved by GE. The sample of cloth is kept with BSO GE (East) Bareilly. 12 Chair Dining Drg No. FD-279 13 (a) Rear leg 14 (b) Front leg 15 (c) Side/back/front rail 16 (d) Stiffener 17 (e) Back rest 18 (f) PVC Shoe 19 (g) M&L for recanning of chair dinning in Godrej pattern with 2 mm wide & 0.6 mm thick for centre portion and 4 mm wide plastic cane for borders of Make Premier/Saha including dismantling of old unserviceable one complete all as specified, directed and shown on drawings. 20 Sofa Set 04/05 Seater Drg No.FD-281 21 (a) Front leg 22 (b) Rear leg 23 (c) Batten 24 (d) Seat and back side rail (three seater) 25 (e) Seat and back long rail (three seater) 26 (f) Seat and back side rail (single seater) 27 (g) Seat and back long rail (single seater) 28 (h) Hand rest 29 (j) PVC Shoe 30 (k) M&L for providing new cushion of 40 density cool foam of size 560x530x110 mm thick of Make Sleepwell Primo Cool/ Kurlon/ Godrej or equivalent complete all as specified, directed and as shown on drawings. 31 (l) M&L for providing new tapestry cloth cover for seat and back foam of sofa sets of approved shade & quality with two zips of Make YKK on one side of cover for easy removing/closing purposes etc to cover the foam of size 560x530x110 mm thick complete all as specified, directed and as shown on drawings. Note: Cost of tapestry cloth shall not be less than Rs 400/-per RM (Make DCM/ Reliance/ S Kumar or equivalent) colour and texture of tapestry shall be approved by the GE. The sample of cloth is kept with BSO GE (East) Bareilly. 32 Chair Easy Drg No. FD-229 33 (a) Rear leg 34 (b) Front leg 35 (c) Arm 36 (d) Front/back/side rail of seat and back 37 (e) PVC Shoe 38 (f) M&L for recanning of the seat & back of chair easy in Godrej pattern with 2 mm wide & 0.6 mm thick for centre portion and 4 mm wide plastic cane for borders of Make Premier/Saha including dismantling of old unserviceable onecomplete all as specified, directed and as shown on drawings. 39 Chair Writing Drg No. FD-280 40 (a) Rear leg 41 (b) Front leg 42 (c) Rear/front/side rail 43 (d) Arm 44 (e) Back rest 45 (f) Stiffener 46 (g) PVC Shoe 47 (h) M&L for recanning of the seat & back of chair writing in Godrej pattern with 2 mm wide & 0.6 mm thick for centre portion and 4 mm wide plastic cane for borders of Make Premier/Saha including dismantling of old unserviceable onecomplete all as specified, directed and as shown on drawings. 48 Bedhard Plywood Top DrgFD-246S&F of following new components of bedhard plywood top comprising outer member made of teakwood and internal frame made of cheer wood, covered both sides ofboard with 3.5 mm thick one side teakwood finish plywood with 12 mm thick half cut teakwood beading including dismantling of old unservicable one complete all as specified, directed and as shown on drawings: 49 (a) Head board complete with legs 50 (b) Foot board complete with legs 51 (c) Long rail 52 (d) Stiffner 53 (e) Wooden bracket 54 (f) S&F of top of bedhard plywood top made of 12 mm thick BWP grade of Make Archid/Century/Greenply with suitable screws including dismantling of old unservicable one complete all as specified, directed and as shown on drawings. 55 Table Centre Drg No. FD-274 56 (a) Leg 57 (b) Top rail (long/front) 58 (c) Top rail (short/side) 59 (d) PVC Shoe 60 (e) Top made of 18 mm thick prelaminated MDF board exterior grade ISI marked (Make Greenply/Archidply/Century/Action Tesa/Duro) duly post-formed with 0.6mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 2mm thick PVC edging fixed on two sides of Make Rehau/Pegasus/Kynex with strong bonded chemical adhesive through hot pressed machine complete including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. 61 Table Dinning 1200x900mm (FD/MAP/II/03) 62 (a) Leg 63 (b) Top rail (long/front) 64 (c) Top rail (short/side) 65 (d) Corner cleat 66 (e) PVC Shoe 67 (f) Top made of 18 mm thick prelaminated MDF board exterior grade ISI marked (Make Greenply/Archidply/Century/Action Tesa/Duro) duly post-formed with 0.6mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 2mm thick PVC edging fixed on two sides of Make Rehau/Pegasus/Kynex with strong bonded chemical adhesive through hot pressed machine complete including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. 68 Table Dinning for 06 Persons Drg No. FD/MAP-II/03 69 (a) Leg 70 (b) Top rail (long/front) 71 (c) Top rail (short/side) 72 (d) Corner cleat 73 (e) PVC Shoe 74 (f) Top made of 18 mm thick prelaminated MDF board exterior grade ISI marked (Make Greenply/Archidply/Century/Action Tesa/Duro) duly post-formed with 0.6mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 2mm thick PVC edging fixed on two sides of Make Rehau/Pegasus/Kynex with strong bonded chemical adhesive through hot pressed machine complete including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. 75 Teapoy Drg NoFD-278 76 (a) Leg 77 (b) Top rail (long/front) 78 (c) Top rail (short/side) 79 (d) PVC Shoe 80 (e) Top made of 18 mm thick prelaminated MDF board exterior grade ISI marked (Make Greenply/Archidply/Century/Action Tesa/Duro) duly post-formed with 0.6mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 2mm thick PVC edging fixed on two sides of Make Rehau/Pegasus/Kynex with strong bonded chemical adhesive through hot pressed machine complete including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. 81 Table 3x2 with Drg No. FD-283 82 (a) Leg 83 (b) Top rail (long/front) 84 (c) Top rail (short/side) 85 (d) PVC Shoe 86 (e) Top made of 18 mm thick prelaminated MDF board exterior grade ISI marked (Make Greenply/Archidply/Century/Action Tesa/Duro) duly post-formed with 0.6mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 2mm thick PVC edging fixed on two sides of Make Rehau/Pegasus/Kynex with strong bonded chemical adhesive through hot pressed machine complete including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. 87 (f) Drawer made of 12 mm thick BWP grade plywood and front side made of 18 mm thick prelaminated MDF board one side laminated finish including provision of knob completed all as specified, directed and as shown on drawings. 88 Table Peg Drg No FD-384 89 (a) Leg 90 (b) Top rail (long/front) 91 (c) Top rail (short/side) 92 (d) PVC Shoe 93 (e) Top made of 18 mm thick prelaminated MDF board exterior grade ISI marked (Make Greenply/Archidply/Century/Action Tesa/Duro) duly post-formed with 0.6mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 2mm thick PVC edging fixed on two sides of Make Rehau/Pegasus/Kynex with strong bonded chemical adhesive through hot pressed machine complete including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. 94 Side Board FD-371 95 (a) S&F of door shutters (both) made of 18 mm thick Pre-laminated MDF board exterior grade duly providing 6 mm thick teak wood beading all round with fittings and fixtures including dismantling of old unserviceable one complete all as specified, directed and shown on drawings. Note: All fittings and fixtures shall be of approved size and quality as per existing. 96 (b) S&F of the front portion of drawer as to match with the existing made out of 18 mm thick prelaminated MDF board with laminated finish andknob including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. 97 (c) S&F of top made of 18 mm thick prelaminated MDF board one side laminated alongwith 4 mm thick teakwood beading including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. 98 (d) S&F of 3.4 mm thick one side teak face plywood on sides (both) including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. 99 (e) S&F of back made of6 mm thick commercial ply wood including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. 100 Table Dressing Gents with Mirror Drg No. FD-379 101 (a) S&F of new looking mirror with frame of 5 mm thick of appropriate size with frame along with 6 mm thick commercial plywood back of the mirror and minor repairs including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. 102 (b) S&F of new drawer made of 12 mm thick commercial plywood and front side made of 18 mm thick pre-laminated MDF board one side laminated finish and provision of knob including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. 103 (c) S&F of new top made of 18 mm thick prelaminated MDF board exterior grade of shade as approved by GE including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. 104 (d) S&F of new bottom made of 18 mm thick prelaminated MDF board exterior grade of shade as approved by GE including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. 105 (e) S&F new sides made of 18 mm thick prelaminated MDF board exterior grade of shade as approved by GEincluding dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. 106 Table Dressing Ladies with Mirror Drg No. FD-251 107 (a) S&F of new looking mirror with frame of 5 mm thick of appropriate size with frame along with 6 mm thick commercial plywood back of the mirror and minor repairs including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. 108 (b) S&F of new drawer made of 12 mm thick commercial plywood and front side made of 18 mm thick pre-laminated MDF board one side laminated finish and provision of knob including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. 109 Table Bed Side Drg No. FD-276 110 (a) S&F of top made of 18 mm thick pre-laminated MDF board one side laminated finish duly providing 4 mm thick teak wood beading all around including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. 111 (b) S&F of side made of 18 mm thick particle board one side laminated finish including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. 112 (c) S&F of new back made of 6 mm thick plywood commercial type including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. 113 Hat Stand Drg No. FD-233 114 (a) S&F of teak ply of appropriate thickness as per drawing to make front side including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. 115 (b) S&F new back ply made of 6mm thick plywood including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. 116 (c) S&F of new wooden frame including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. 117 (d) S&F of brass pegs including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. 118 (e) S&F of 5 mm thick looking mirror with edging including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. 119 Notes applicable to Sl item Nos 19.01 to 19.18 :-(a) M & L for melamine polish with spray machine after removing of existing polish of any description by scrapping and smothening of surface wherever required or as directed by Engr-in-Charge to the following furniture articles all are of MES pattern viz F/DB/FD/MAP series or similar items including applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and as directed by Engr-in-Charge.(b) Work will be executed where the furniture exist in different User Units at OTM/MD Accns under the jurisdiction of GE (East) Bareilly including BSOs Furniture Yard as directed by Engr-in-Charge. 120 Chair Dinning Cushioned Drg No. FD/E6/MAP/10(R) 121 Chair Dining Drg No. FD-279 122 Sofa Set 04 Seater Drg No.FD-281 123 Sofa Set 05 Seater Drg No.FD-281 124 Chair Easy Drg No. FD-229 125 Chair Writing Drg No. FD-280 126 Bedhard Plywood Top DrgFD-246 127 Table Centre Drg No. FD-274 128 Table Dinning 1200x900mm (FD/MAP/II/03) 129 Table Dinning for 06 Persons Drg No. FD/MAP-II/03 130 Teapoy Drg NoFD-278 131 Table 3x2 with Drg No. FD-283 132 Table Peg Drg No FD-384 133 Side Board FD-371 134 Table Dressing Gents with Mirror Drg No. FD-379 135 Table Dressing Ladies with Mirror Drg No. FD-251 136 Table Bed Side Drg No. FD-276 137 Hat Stand Drg No. FD-233 138 STEEL FURNTIRE 139 Tepoy Verandah Drg No.FD/E6/MAP/17 S & F of the following components of tepoy varandah including dismantling of old unservicable one complete all as specified, directed and as shown on drawing: - 140 (a) Top made of 18 mm thick prelaminated MDF board exterior grade ISI marked (Make Greenply/Archidply/Century/Action Tesa/Duro) duly post-formed with 0.6mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 2mm thick PVC edging fixed on two sides of Make Rehau/Pegasus/Kynex with strong bonded chemical adhesive through hot pressed machine. 141 (b) Mild steel flat iron of size 25mm x 3mm thick x4 Nos 142 (c) PVC shoes. 143 Chair Verandah Drg No. FD-359 S & F of the following components of chair verandah including dismantling of old unservicable one complete all as specified, directed: 144 (a) Recaning the chair fully both seat and back with new plastic cane, white, half round of size 4 mm wide of approved quality. 145 (b) PVC shoes. 146 Blank 147 Chair Writing Steel Drg No. FD/E6/MAP/12 pattern:S & F of the following components of chair writing steel (approved quality) including dismantling of old unserviceable one complete all as specified and directed. 148 (a) Seat and Back. 149 (b) Handle (PU soft). 150 Book Case Steel Drg No. FD-1028 S & F of the following components of book case steel including dismantling of old unserviceable one complete all as specified and directed: - 151 (a) 1.25 mm thick mild steel channel. 152 (b) Iron cleat stoper 20mm X 10mm. 153 (c) 3 mm thick plain glass. 154 Chair School Hand Board Drg No. FD/E6/MAP/05 S & F of the following components of chair school hand board having original pattern of different make and model including dismantling of old unserviceable one complete all as specified and directed: - 155 (a) Hand board made of 18 mm thick prelaminated MDF board exterior grade of Make Greenply/Archidply/Century/Action Tesa/Duro in colour/shade as approved by GE with 2mm thick hot machine pressed PVC edging of Make Rehau/Pegasus/Kynex shall be fixed on all sides with strong bonded chemical adhesive complete. 156 (b) PVC Frame (Seat & Back) as per existing pattern. Make- Supreme/Neelkamal. 157 (c) PVC shoes. 158 Table Bed Side Drg No. FD/E6/MAP/15 S & F of the following components of table bed side including dismantling of old unservicable one complete all as specified, directed and shown on drawings: - 159 (a) Top made of 18 mm thick prelaminated MDF board exterior grade of Make Greenply/Archidply/Century/Action Tesa/Duro in colour/shade as approved by GE with 2mm thick hot machine pressed PVC edging of Make Rehau/Pegasus/Kynex shall be fixed on all sides with strong bonded chemical adhesive complete. 160 (b) Small drawer with telescopic channel. 161 (c) Large drawer with telescopic channel. 162 (d) CP Handle size 75 mm. 163 (e) Side made of 18mm thick Prelaminated MDF Board exterior grade. 164 (f) PVC shoes. 165 Rack Shoe Steel Drg No. FD/E6/MAP/02(R) S & F of the following components of rack shoe steel including dismantling of old unservicable one complete all as specified, directed and shown on drawings: - 166 (a) 25 mm dia mild steel pipe for main frame size as per drg 167 (b) 700x300mm size frame of welded wire mesh made of 3 mm dia mild steel wire consisting of 9 rows in one side and 3 rows in other side as per drawing. 168 (c) PVC shoes. 169 Chair Steel Tubular With Arms Drg No. FD-75 S & F of the following components of chair steel tubular with / without arms made of shisham wood french polished duly plastic canned in Godrej pattern with plastic cane 2 mm width and borders with 4 mm wide plastic cane fixed with screws 7.5 cm long (4 Nos. duly fitted with one nut and one washer) to fixed the chair frame complete all as specified, directed and shown on drawings including dismantling of old unservicable one: - 170 (a) Seat frame. 171 (b) Back frame. 172 (c) Handle made of shisham wood duly french polished and fixed to the chair tubular with arms with screws of suitable size. 173 (d) 50 mm long flat iron piece made of 25 X 4 mm flat duly welded at four corner of seat and back to supportand screwed with the seat at two places. 174 (e) PVC rubber cap on back of chair frame where ever required at the top of frame. 175 Bed Hard Steel Drg No. FD/E6/MAP/08S & F of the following components of bed hard steel including dismantling of old unservicable one complete all as specified, directed and shown on drawing: - 176 (a) 12 mm thick BWP grade plywood of Make Archid/Century/Greenply on top of the bed with suitable screws. 177 (b) Head board made of 18 mm thick prelaminated MDF board including 04 mm thick PVC beading as per drawing. 178 (c) Foot board made of 18 mm thick prelaminated MDF board including 04mm thick PVC beading as per drawing. 179 (d) PVC shoes. 180 Table Office Clerk Steel Drg No. 1004 S & F of the following components of table office officer/clerk steel including dismantling of old unservicable one complete all as specified, directed and as shown on drawings: 181 (a) Drawer made of 1 mm thick mild steel sheet. 182 (b) Lock 6 lever with duplicate keys (Make Harison/Godrej). 183 (c) Side panel made of 1 mm thick mild steel sheet. 184 (d) Top made of 18 mm thick prelaminated MDF board exterior grade ISI marked (Make Greenply/Archidply/Century/Action Tesa/Duro) duly post-formed with 0.6mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 2mm thick PVC edging fixed on two sides of Make Rehau/Pegasus/Kynex with strong bonded chemical adhesive through hot pressed machine. 185 (f) PVC shoe. 186 Almirah Steel Medium Drg No. 1032 S & F of the following components of almirah steel medium including dismantling of old unservicable one complete all as specified, directed and as shown on drawings: - 187 (a) Lock 6 lever with duplicate keys (Make Harison/Godrej). 188 (b) CP handle 100 mm size. 189 (c) 3 way locking device. 190 (d) Leg made of 1 mm thick mild steel sheet duly welded/riveted as directed. 191 (e) Door shutters made of 1 mm thick mild steel sheet. 192 (f) Shelves made of 1 mm thick mild steel sheet. 193 Almirah Steel Large Drg No. FD- 1031 S & F of the following components of Almirah steel large including dismantling of old unservicable one complete all as specified, directed and shown on drawings: - 194 (a) Lock 6 lever with duplicate keys (Make Harison/Godrej). 195 (b) CP handle 100 mm size. 196 (c) 3 way locking device. 197 (d) Leg made of 1 mm thick mild steel sheet duly welded/riveted as directed. 198 (e) Door shutters made of 1 mm thick mild steel sheet. 199 (f) Shelves made of 1 mm thick mild steel sheet. 200 Locker Steel Drg No.1029 S & F of the following components of locker steelincluding dismantling of old unservicable one complete all as specified, directed and shown on drawings: - 201 (a) CP D type Handle 100 mm size. 202 (b) CP Hasp and staple 75 mm size. 203 (c) CP hanging rod 20 mm dia size as per drg 204 (d) Leg made of 1 mm thick mild steel sheetduly welded/riveted as directed. 205 (e) Door shutter made of 1 mm thick mild steel sheet. 206 Table Computer MAP Drg No. FD/E6/MAP/03S & F of the following components of table computer MAP/TP including dismantling of old unservicable one copllete all as specified, directed and shown on drawings. 207 (a) Top made of 18 mm thick prelaminated MDF board exterior grade ISI marked (Make Greenply/Archidply/Century/Action Tesa/Duro) duly post-formed with 0.6mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 2mm thick PVC edging fixed on two sides of Make Rehau/Pegasus/Kynex with strong bonded chemical adhesive through hot pressed machine. 208 (b) Shelves/bottom made of 18 mm thick prelaminated MDF board exterior grade ISI marked of Make Greenply/Archidply/Century/Action Tesa/Duro in colour/shade as approved by GE with 2mm thick hot machine pressed PVC edging of Make Rehau/Pegasus/Kynex shall be fixed on all sides with strong bonded chemical adhesive complete. 209 (c) Drawer with telescopic channel. 210 (d) Pull out tray with telescopic channel. 211 (e) CP Drawer knob. 212 (f) Side of table. 213 (g) PVC shoes. 214 Chair Trade Pattern (Revolving High/Medium Back/ Computer) 215 (a) Material & Labour for re-upholstering of seat and back with new tapestry cloth of approved quality including dismantling of old unserviceable one for chair revolving high/medium back/ chair computer of different make and model complete all as specified and directed. 216 (b) S&F of 75 mm thick new seat and 50 mm thick new back cushion of 32 density PU approved quality foam duly covered with new tapestry cloth of approved quality including dismantling of old unserviceable one for chair revolving high/medium back/ chair computer of different make and model complete all as specified and directed. 217 (c) S&F of Hydraulic system of suitable size and design as per original Pattern of different Make and Model including dismantling of old unserviceable one for chair revolving high/medium back/ chair computer of different make and model complete all as specified and directed. 218 (d) S&F of handle of chair (PU Soft) of suitable size and design as per original pattern of different make and model including dismantling of old unserviceable one for chair revolving high/medium back/ chair computer of different make and model complete all as specified and directed. 219 (e) S&F of suitable castor wheel to chairs revolving as per original Pattern of different make and model including dismantling of old unserviceable one for chair revolving high/medium back/ chair computer of different make and model complete all as specified and directed. 220 (f) S&F of wheel base including five Nos. of castor wheels to chairs revolvingas per original pattern of different make and modelincluding dismantling of old unserviceable one for chair revolving high/medium back/ chair computer of different make and model complete all as specified and directed. 221 Table Dinning ORs Steel Drg No. FD-165 (R) S & F of the following components of table dinning ORs steelincluding dismantling of old unservicable one complete all as specified, directed and shown on drawings: - 222 (a) Table top made of 19 mm thick Block board with 22 mm gauge aluminium sheet. 223 (b) PVC shoe. 224 Table 3x2 with Drawer Drg No. FD-1008 : S & F of the following components of table 3x2 with drawer including dismantling of old unservicable one complete all as specified, directed and shown on drawings: - 225 (a) Top made of 18 mm thick prelaminated MDF board exterior grade ISI marked (Make Greenply/Archidply/Century/Action Tesa/Duro) duly post-formed with 0.6mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 2mm thick PVC edging fixed on two sides of Make Rehau/Pegasus/Kynex with strong bonded chemical adhesive through hot pressed machine. 226 (b) Leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick. 227 (c) Short rail/stiffner of conduit pipe 25 mm 1.6 mm thick. 228 (d) Long rail/siffner of conduit pipe 25 mm 1.6 mm thick. 229 (e) Lock 6 lever with duplicate keys (Make Harison/Godrej). 230 (f) Drawers made out of 1mm thick MS sheet. 231 (g) PVC/Hard rubber shoes. 232 Table 3x2 without Drawer Drg No. FD-1007 S & F of the following components of table 3x2 without drawer including dismantling of old unservicable one complete all as specified, directed and shown on drawings: - 233 (a) Top made of 18 mm thick prelaminated MDF board exterior grade ISI marked (Make Greenply/Archidply/Century/Action Tesa/Duro) duly post-formed with 0.6mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 2mm thick PVC edging fixed on two sides of Make Rehau/Pegasus/Kynex with strong bonded chemical adhesive through hot pressed machine. 234 (b) Leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick. 235 (c) Short rail/stiffner of conduit pipe 25 mm 1.6 mm thick. 236 (d) Long rail/siffner of conduit pipe 25 mm 1.6 mm thick. 237 (e) PVC/Hard rubber shoes. 238 Charpoy GI Pipe Drg No. FD-220 S & F of the following components of charpoy GI pipe including dismantling of old unservicable one complete all as specified, directed and shown on drawings: - 239 (a) Long rail made of 32 mm bore GI tubing medium grade ISI marked 1.88 metre long, threaded at both ends and fixing to 3 way 32 mm size GI elbow of charpoy. 240 (b) Conversion of 32 mm bore long rail obtained from dismantling of item No. 19.01 above into two numbers short rail after cutting and threading both ends and fixing to 3 way 32 mm dia existing elbow. 241 (c) Conversion of 32 mm bore short rail obtained from dismantling of item No. 19.02 above into two number legs including fixing to 3 way 32 mm dia at one end threaded and cover the other end with hard rubber / PVC shoe. 242 (d) Check nuts of 32 mm dia. 243 (e) 3 way 32 mm dia GI elbow ISI marked. 244 (f) 12 mm thick BWP grade ISI marked plywood of Make Archid/Century/Greenply of size 2000 mm x 900 mm including providing 50 mm wide strip made out of 6 mm thick plywood for filling gap between plywood sheet and short rails including replacement of nut-bolts as required for fixing of plywood. 245 (g) Mild steel flat iron of size 40x4 mm, length suitable to connect both long rails to support ply top with two Nos. Nut-bolts and double washers. 246 Charpoy IP with Hard Top Drg No. FD/MAP-II/01S & F of the following components of charpoy IP with hard top (MAP) including dismantling of old unservicable one complete all as specified, directed and shown on drawings: - 247 (a) Leg 440 mm high, made of 32 mm X 32 mm square mild steel pipe having wall thickness of 16 gauge duly fixed with gas welding and standard workmanship. 248 (b) Long rail 1916 mm long, made of 65 mm X 25 mm rectangular mild steel pipe having wall thickness of 16 gauge duly fixed with gas welding and standard workmanship. 249 (c) Short rail 836 mm long, made of 65 mm X 25 mm rectangular mild steel pipe having wall thickness of 16 gauge duly fixed with gas welding and standard workmanship. 250 (d) Stiffner any type 836 mm long, made of 25 mm X 25 mm rectangular mild steel pipe having wall thickness of 16 gauge duly fixed with gas welding and standard workmanship. 251 (e) Mild steel clip of size 60 X 25 X 6 mm, made to shape as required, fixed duly welded to frame of charpoy. 252 (f) 12 mm thick BWP grade ISI marked plywood of Make Archid/Century/Greenply of size 1916 mm X 836 mm, fixed with 10 Nos nut-bolts of size as required and directed. 253 M & L for running gas or electric welding as per site requirement, to make good the loose joints complete all as specified and directed. 254 M & L for mild steel square pipe of size 25mmx25mmx1.60mm wall thickness as in any part of steel furniture in any length as required, duly welded to the existing frame including dismantling of old unserviceable one complete all as specified and directed. 255 M & L for preparation of the following old painted steel furniture articles of any description and in any position, filling cavities with necessary putty or other fillars to achieve even and smooth suface and applying one coat of synthetic enamel paint to achive surface even and smooth in glossy finish complete all as specified and as directed: - NOTES: - (i) Painting work shall be carried out all around on the complete exposed surface including internal parts like shelves, drawers, stiffners, partions etc. with spray painting process. (ii) Newly replaced parts shall be treated with one coat of red oxide primer before painting work and cost of the same deemed included in the unit rate of these items.(iii) Cost of removing of all dent and correcting of deshaped profiles shall deemed to be included in the unit rate of these items. (iv) Surface and site shall be made neat and clean by the contractor. (v) Work shall be carried out within the area of GE (East) Bareilly, Furniture yard of BSO as per direction of the Engineer-in-Charge. 256 Teapoy verandah steel FD/E6/MAP/17 257 Chair verandah steel FD-359 258 Chair writing steel (FD/E6/MAP/12) 259 Book case steel FD-1028 260 Chair school hand board (FD/E6/MAP/05) 261 Table bed side (FD/E6/MAP/15) 262 Rack shoe steel FD-E6/MAP/02(R) 263 Chair steel tubular with arms FD-75 264 Bed hard steel (FD/E6/MAP/08) 265 Table office clerks steel FD-1004 266 Almirah steel medium with shelves FD-1032 267 Almirah steel large with shelves FD-1031 268 Locker steel FD-1029 269 Table dinning ORs FD-165(R) 270 Table 3x2 with drawer (FD-1008) 271 Table 3x2 without drawer (FD-1007) 272 Charpoy GI pipe (FD-220) 273 Charpoy IP with hard top MAP (FD/MAP-II/01)
