|
| 1 | Supply of M.S. Pipe having inner Dia 150 mm (B-Class) Make-Jindal/Tata |
| 2 | Supply of M.S. Pipe having inner Dia 200 mm (Thickness -5 mm) Make-Jindal/Tata |
| 3 | Supply of Sluice valve size NB 150 mm, Confirming IS 14845 PN 1.0, Fasteners- CS IS:1367, Gas Kit- Natural Rubber. Flange Drilling- IS 1538, Make- Kirloskar/IVC/Any DJB approved |
| 4 | Supply of heavy duty 90o M.S long bend of inner Dia 150 mm, C Class |
| 5 | Supply of heavy duty M.S. Reducer Dia 200 mm to 150 mm |
| 6 | Supply of rubber Gasket suitable for MS Pipe valves and Flanges joints. |
| 7 | Supply of M.S Flanges for Pipe ID 150 MM thickness 16 MM Confirming to IS 1538:1993 |
| 8 | Supply of material for making support structure of MS pipe hydrant including MS Channel, Angle, High tensile Nut bolts & U clamps etc. for the fabrication of support structure for MS pipe hydrants & frame to protect the hydrant & valves from any damages occurred due to accidentally collision of tankers. |
| 9 | Dismantling of old/damage/rusted support structure, MS Pipe & sluice valves from 6 inch Pipe hydrant with the help of Mechanical or manual means, manpower, all tools & tackles & all safety equipments as per the requirement of site and hand over to Engineer In-charge. |
| 10 | Welding of support structures, frame & flanges with MS pipe after making V Groove on both ends with double layer of welding and also Repairing and welding of MS pipe leakage. Including complete arrangement of welding machine, Gas cutter & D.G. set along with Fuel & Operator & all consumables and safety equipments required as per the work. |
| 11 | Fixing & proper alignment of MS pipe hydrants along with support structure, installation of new 150 MM sluice valves and also replacement of hydrants gasket and nut bolts etc. Including all tools and tackles, manpower, safety equipments and foundation work as per site requirement. |
| 12 | Painting of MS pipe hydrants, support structures and frames with one layer of anti corrosive Primer and two layer of enamel paint after complete cleaning of rust. |
| 13 | Supply of building material as required for the construction of suitable size support at the bottom of pipe hydrant & support structure to avoid contact of water & rusting at bottom. |
| 14 | Providing & fixing of 2 meter long canvas pipe at the end of 150 MM Pipe hydrant with nut bolt & clamps to avoid spreading of treated effluent. |
| 15 | Testing of the Pipe Line & valve leakage with suitable hydraulic pressure along with all tools tackles & safety Equipment. |
