Tender For Provision Of Certain Sanction Work Of Abod In A A Banar Under Ge Banar; 1.00 Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified. 2.00 Excavating in trenches n. exc 1.5m wide and n. exc 1.5m in depth for foundationetc for shafts, wells, cesspits, manholes, pier holes etc n. exc 10 Sqm on plan and n. exc 1.5m in depth and getting out in soft/loose soil complete all as specified. 3.00 M&L for providing cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified. 4.00 Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified. 5.00 Removing excavated material (soil) n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified. 6.00 M&L for brickwork with sub class B old size well burnt bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified. 7.00 M&L for RCC 1:2:4 Type B1 ( using 20mm graded aggregate) as in plinth band ,lintel band etc complete all as specified. 8.00 M&L MS TMT bars 10mm dia and over cut to length bent to shape required incl cranking bending spirally for hooping for columns hooking ends and binding with MS wire annealed )not less that o.9mm or securing with clips quilty conforming to TMT bars complete all as specified. 9.00 M&L MS TMT bars 6 to 8mm dia and over cut to length bent to shape required incl cranking bending spirally for hooping for columns hooking ends and binding with MS wire annealed )not less that o.9mm or securing with clips quilty conforming to TMT bars complete all as specified. 10.00 Supply only integral water proofing compound complete all as specified. 11.00 M&L for cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in coping complete all as specified. 12.00 M&L for hard core of gauge n.exc 63mm , deposited,spread and levelled in layers n.exc 15 cm thick ,watered and rammed to a true surface using broken stone or boulders complete all as specified. 13.00 M&L for providing 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in sub base of floors complete all as specified. 14.00 M&L for providing 25mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded aggregate) as in underlayer floors complete all as specified. 15.00 M&L glazed ceramic White tiles in vertical surface 450x 350mmx7mm thick set and jointed in neat cement slurry and pointed in white cement with pigment to match the surface over and including 10 mm thick screed in CM 1:4 complete all as specified.Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge 16.00 M&L Non skid coloured ceramic tills 7 to 8mm thick (saqaure/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floors/skirting set in neat cement sullary and pointed with coloured /white cement to match the surface over and including 15mm thick screed bed in CM 1:4 complete all as specified. 17.00 M&L for cement concrete type C-1 1:3:6 (20mm graded aggregate ) as in plinth protection, 50mm thick complete all as specified. 18.00 M&L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work, finished even and smooth without using extra cement complete all as specified. 19.00 M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work, finished even and smooth without using extra cement complete all as specified. 20.00 M&L for rendering 10mm thick in CM 1:4 on fair faces of brick work/concrete surfaces as in ceiling, finished even and smooth without using extra cement complete all as specified. 21.00 M&L for preparation newly plastered wall surfaces and applying two coats of oil bound distemper over 1mm thick birla wall putty complete all as specified. 22.00 M&L for preparation newly plastered ceiling surfaces and applying two coats of oil bound distemper over 1mm thick birla wall putty complete all as specified. 23.00 M&L for preparation newly plastered wall surfaces and applying two coats of cement base paint over a coat of white wash complete all as specified. 24.00 S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured sheet reinforced with MS square tube as per specification complete all as specified. 25.00 Factory made PVC solid panel door shutter 30mm thick consisting of frame made out of MS tube for top and bottom rail MS frame shall be covered with heat moulded plane colour PVC channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plane coloured PVC sheet for top, lock and bottom rail on either side and as gap inset for top and bottom rail paneling or plane colour PVC sheet to be fitted in MS frame welded/sealed to stiles and rails with suitable PVC sheets beadings and joint together with solvent cement S&F in frame at site as per specification and drg complete all as specified. 26.00 S&F Butt hinges medium weight 100mm cold rolled complete all as specified. 27.00 S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified. 28.00 S&F 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified. 29.00 M&L roughly squared stone lintels hammer dressed on face and soffits, hoisted, set and pointed in cement mortar 1:6 complete, n.exc 3m in length complete all as specified. 30.00 M&L cement concrete 1:2:4 mix type B-O (12.5 mm graded stone aggregate) average thickness 40mm as in padding finishing surface of concrete topping even and fair (without using extra cement) all as specified. 31.00 M&L for 10mm thick plastering in CM(1:3) on concrete roof surfaces with water proofing compound @ 3% by weight of cement and finishing the surface even and fair without using extra cement complete all as specified.Note :- WPC shall be measured and paid separately. 32.00 M & L painting roof surfaces with one coat of bitumen primer T-10/polymerised grade conforming to IS-3384 @ 0.30kg /Sqm and one coat of bonding material using blown type bitumen confirming to IS-702 grade 85/25 @ 1.20 Kg/Sqm laying of 3mm thick and weight not less than 3.50 Kg/Sqm with 10cm side overlap having centre core of 100 micron HMHDPE, outer film is 20 micron each and applying one coat of bonding material using blown type bitumen confirming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm over APP membrane complete all as specified. 33.00 S & F rotational moulded polythylene water storage tank with float valve, plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of 500 ltr capacity incl making connections complete all as specified. 34.00 S & F Vitreous China wash basin, white, flat back, size 630x450mm, including brackets, (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand complete all as specified. 35.00 S&F GI tube med grade with all fittings and fixed complete to wall bore of pipe 15mm complete all as specified. 36.00 All item as per Ser No 35 above but 20mm bore complete all as specified. 37.00 S&F vitreous China squatting pan orrisa pattern, of size 580mm white with P or S trap front or back inlet and complete with integral foot rests (excluding flushing cistern and flush pipe) compete all as specified. 38.00 S&F Vitreous China Urinal, ladies type of size 580mm fixed on floor white (excluding flushing cistern, flush pipe and waste pipe complete all as specified. 39.00 S&F PVC low level flushing cistern 10 ltrs capacity white with inlet ball value, float valve and handle incl brackets, PVC flush pipe complete all as specified. 40.00 S&F PVC connection of length 450mm, 15mm size with PTMT nut of length 450 mm complete all as specified. 41.00 S&F steel ventilator top hung incl hinges steel peg stay complete all as specified. 42.00 S&F Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified. 43.00 S&F Flush pipe of polythylene of low or high density or PVC 32mm dia for low level flushing cistern complete all as specified. 44.00 S&F Stop valves 15mm cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends chromium plated 15mm bore with long shank and cup (concealed type) complete all as specified. 45.00 S&F Bib taps cast copper alloy with crutch or butterfly handles screwed down ,screwed for iron pipe 15mm bore chromium plated complete all as specified. 46.00 M&L for 110mm PVC (SWR) pipes, single socketed, in any length, with rubber rings joints, laid in trenches or in floors complete all as specified. 47.00 M&L for 75mm PVC (SWR) pipes, single socketed, in any length, with rubber rings joints, laid in trenches or in floors complete all as specified. 48.00 M&L for 75mm dia of bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified. 49.00 M&L for 110mm PVC (SWR) bends any radius complete all as specified. 50.00 M&L for 75mm dia PVC (SWR) vent cowl complete all as specified. 51.00 PCC (1:4:8) type D2 using 40mm graded crushed stone aggregate in concrete bedding to drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested complete for 150mm bore pipe complete all as specified. 52.00 M&L reinforced concrete pipes 150mm bore, class NP-2, laid and jointed complete all as specified. 53.00 M&L for precast cement concrete block masonary with solid block of (1:4:8) type D2 exc 10 cm in width & setting in cm (1:6) complete all as specified. 54.00 M&L for cement concrete (1:2:4) type B1 using 20 mm graded crushed stone aggregate in surface channels or drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified. 55.00 M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred /stopped ends etc complete all as specified. 56.00 All item as per Ser No 55 above for each 25mm girth or part thereof over 30cm complete all as specified. 57.00 M&L for precast reinforcement cement concrete 1:2:4 using 20 mm graded crtushed stone aggr for manhole cover including placing in position and set in CM( 1:4) complete all as specified. 58.00 M&L for mild steel work conforming to Fe-290 Gde E-165 in flat iron and similar small articles complete all as specified. 59.00 M&L for rendering 10 mm thick on block masonary walls In cm (1:4) mixed with WPC as per manufactures instructions. (Note : WPC shall be measured and paid sepately) complete all as specified. 60.00 Construction of soakage wells of size 1.20m x 3.90 metre effective depth excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of RCC 1:2:4 including intercepting chamber and screen chamber made of Brick masonary in CM, 1:4 RCC cover slab in 1:2:4 SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats complete all as specified. 61.00 M&L Squared rubble walling Jodhpur type, regular coursed, well bonded, bedded and solidly hearted,built in cement mortar 1:4 complete all as specified. 62.00 Extra over to stone walling for hammer dressing to face stones and dressing of the face beds & joints as specified of squared rubble walling regular coursed,Jodhpur type, with maximum depression of face from straight edge held against the dressed surface n.exc. 20mm complete all as specified. 63.00 M& L for rendering in cement mortar (1:4), 10mm thick on stone masonry surfaces finished fair and even complete all as specified. 64.00 M&L moorum/ red bajri filling in floors or pavings, laid in layers n.exc 15cm thick, spread, levelled and rammed including watering ramming complete all as specified. 65.00 M&L for 100mm thick cement concrete type C2 1:3:6 (using 40mm graded broken stone aggregates) laid to required gradient and camber as in sub floor complete all as specified. 66.00 M&L cement concrete type B1 1:2:4 (20mm graded aggregate) as in mass concrete and flooring finished complete all as specified. 67.00 M&L for forming contraction (Dummy) joints 65mm deep x 10mm wide and filled with sealing compound grade A complete all as specified. 68.00 M & L for preparation of newly plastrered surfaces of walls & applying two coats of white wash complete all as specified. 69.00 M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLSH cable 1100 volts grade, ISI - 694 marked, in PVC rigid conduits heavy duty ISI marked totally concealed in wall/floor/roof including all accessories etc. with sunken boxes suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified for the following:-Note- (i) Cutting in chases and pointing in will be done by contractor without any cost. (ii) Making good of distrubed surfaces matching with existing finishes will be done by contractor without any extra cost .(a) One light point/fan point controlled by one way switch. 70.00 All item as per Ser No 69.00 above but one 5 pin 5Amp Socket outlet point on same board with other switches including earth wire complete all as specified. 71.00 Supply and fixing switch Piano flush type 5 Amp single pole complete all as specified. 72.00 Supply and fixing multipurpose socket outlet with piano flush type 3 pin 5/6 Amp complete all as specified. 73.00 Supply and fixing ceiling rose on PVC board three terminal complete all as specified. 74.00 S&F MCB SPN DB 4 way, double door, with 200 amp rated busbar 240 V complete all as specified. 75.00 S & F for MCB Single pole rated capacity 6 to 32 amps, 240 V breaking capacity 10 KA ,C- curve complete all as specified. 76.00 S & F for MCB SPN rated capacity 32 amps, 240 V breaking capacity 10 KA ,C- curve complete all as specified. 77.00 Supply and fix Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 300mm complete all as specified. 78.00 Supply and fixing LED lights fitting 1x 20/22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified. 79.00 Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified. 80.00 Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified. 81.00 M & L for cutting/making of hole suitable size for 300mm exhaust fan in the stone masonary/brick wall and making good the surfaces by plastring of cement mortar and finish surface with existing wall complete all as specified. 82.00 M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover and watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete all as specified. 83.00 Material and labour for sand cushioning for under ground cable with locaally available sand for protection of cable 8 cm under the cable and 15 cm over the cable including and spreading and consolidations complete all as specified.Note :- For the purpose of payment only punned thickness will be measured. 84.00 Supply and laying un reinforced precast concrete cable cove class LV type 1 flat size 250mmx150mmx40mm laid perpendicular to cable length in trench after sand cushioning to cable complete all as specified. 85.00 Supply laying and testing in replacemenet of LT XLPE cable,insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with multistanded allumiuium conductor of size 10 sqmm 2 core complete all as specified. 86.00 Supply and lay galvanised medium grade including fitting 40 mm dia with all fittings laid in trenches/floor complete all as specified. 87.00 M&L for cutting the road/hard standings/boundary wall and excavating in trenches not exceding 0.40 mtr wide and not exc 0.80 mtr deep across the road for laying cable including making good the excavated portion by means of PCC 1:2:4, Type B1 using 20 mm graded stone aggregate complete and matching with the surroundings. 88.00 Supply and laying GI tubing medium grade with all fittings(ISI Marked) and fixed complete laid in trenches/fixed to walls (including clamps)/fixed on pillars etc complete all as specified and directed of size 25 mm dia complete all as specified. 89.00 Supply and laying GI tubing medium grade with all fittings and fixed complete laid in trenches/fixed to walls (including clamps)/fixed on pillars etc complete all as specified and directed of size 20 mm dia complete all as specified. 90.00 Supply and fixing Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe, non rising forged brass spindle class I and fixed with required necessary GI fittings complete of size 20 mm dia complete all as specified. 91.00 M&L for Cutting /Drilling of water pipe line of 50mm to 100 mm and making hole for taking new connection of 20/25 inluding ferrule, clamps and all fittings complete all as specified.
