Construction Of New(Type 1-2-3) M O Quarter, Compound Wall , Drain And Road Other Works Phcat. Hayatnagartq .Basmath Dist.Hingoli, Basmath-Maharashtra

TDR : 51711289

Tender Notice
BOQ

Expired

Basmath , Maharashtra

Tender Brief : Construction Of New(Type 1-2-3) M O Quarter, Compound Wall , Drain And Road Other Works Phcat. Hayatnagartq .Basmath Dist.Hingoli

Document Fees
₹ 10000 /-

EMD
₹ 678000.0 /-

Tender Value
Refer document

Submission Date
03-11-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Construction of New(type 1M O Quarter 8 Nos :- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removingtheexcavatedmaterialuptoadistanceof50m.beyondthebuildingareaand stackingandspreadingasdirected,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Bd.A.1 Page One Number 259
2	Excavation for Foundation In Hard Murum including removing the excavated materials upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50m) Spec.No. : Bd.A.2, Page No. 259.
3	Providing Preconstructional Antitermite Treatment As Per I.S. 6313 (PartII) By Treating The Bottom Surface And Sides Of Excavation at the rate of 5 litres of emulsion concentrate of 0.5 percent of clorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. Spec. No. As Directed By Engineer In Charge.
4	Providing Ppreconstructional Antitermite Treatment As Per I.S. 6313 (PartII) By Treating The Top Surface Of Plinth Filling at the rate of 5 litres of emulsion concentrate at 0.5 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. ( AS per Item no. 22.43 of schedule of rates of NBO ) Spec.No. : As Directed By Engineer In Charge.
5	Providing Soling Using 80 mm Size Trap Metal In 15 Cm. Layer including filling voids withCrushed Sand / grit, ramming, watering complete. Spec.No. : As Directed By Engineer In Charge.
6	Filling In Plinth And Floors With Approved Excavated Materials In 15 Cm To 20 Cm Layers including watering and compaction complete. Spec. No Bd. A. 10 Page No. 262
7	Filling In Plinth And Floors With Contractor\"s Soil, Sand Or Murum In 15 Cm To 20 Cm Layers including watering and compaction complete. Spec. No. Bd.A 11, Page No. 263
8	Providing and laying in Cast In Situ / Ready Mix Cement Concrete In M-10 Of Trap / Granite / Quartzite / Gneiss Metal For Foundation And Bedding including bailing out water, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With Natural Sand / V.S.I. Quality Artificial Sand. Spec. No. Bd.E.1 Page No. 287
9	Providing and laying in Cast In Situ / Ready Mix Cement Concrete M-25 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Work In Foundations Llike Raft, Strip Foundations, Grillage And Footings of R.C.C. Columns and steel stanchions etc. including bailing out water, formwork, cover blocks,laying / pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. etc. complete, With fully automatic micro processor based PLC with SCADA enabled reversible. Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With Natural Sand / V.S.I. Quality Artificial Sand. Spec. No. Bd.F.3 Page No. 298 and B.7, Page No. 38
10	Providing and casting in Cast In Situ / Ready Mix Cement Concrete M-25 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan Mixer) etc. complete. With Natural Sand / V.S.I. Quality Artificial Sand. Spec. No. Bd.F.5 Page No. 300 And B7, Page No 38.
11	First Floor
12	Providing & casting in Cast In Situ / Ready Mix Cement Concrete M-25 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Beams And Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan Mixer) etc. complete. With Natural Sand / V.S.I. Quality Artificial Sand. Spec. No. Bd.F.6 Page No. 300 and B.7, Page No.38
13	First Floor
14	Providing & casting in Cast In Situ / Ready Mix Cement Concrete M-25 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Chajja as per detailed design & drawings including centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. Spec. No. Bd.F.9 Page No. 303 and B.7, Page No.38
15	First Floor
16	Providing and casting in Situ / /Ready Mix Cement Concrete M-25 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Slabs And Landings as per detailed designs and drawings including centering, formwork, cover blocks compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan Mixer) etc. complete. With Natural Sand / V.S.I. Quality Artificial Sand.. Spec. No. Bd.F.8 Page No. 302 and B.7, Page No.38
17	First Floor
18	Providing and casting inCast In Situ / Ready Mix Cement Concrete M-25 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Pardi of required thickness including centering, formwork, cover blocks, laying / pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Spec. No. Bd.F.11 Page No. 304 and B.7, Page No. 38
19	First Floor
20	Providing and laying Cast In Situ / Ready Mix Cement Concrete M-25 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Waist Slab, And Steps Of Staircases as per detailed design and drawings or as directed including steel centering, plywood / steel formwork, steel props, laying / pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With Natural Sand / V.S.I. Quality Artificial Sand. Spec. No. : Bd.F. 13 Page No. 305. /I.S. 456 (2000)
21	First Floor
22	Providing and laying Cast In Situ / Ready Mix Cement Concrete M-15 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C.Coping To Plinth Or Parapet Moulded Or Chamfered As Per Drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) Spec. No. Bd.E. 3/Page No. 288/I.S. 456 (2000)
23	First Floor
24	Providing and fixing in position TMT FE - 500 Bar Reinforcement Of Various Diameters For R.C.C. Pile Caps, Footings, Foundations, Slabs, Beams Columns, Canopies, Staircase, Newels, Chajjas, Lintels Pardis, Copings, Fins, Arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec. No. Bd.F.17 Page No.306.
25	First Floor
26	Providing Fly Ash Brick Masonry With Conventional / I.S. Type Fly Ash Bricks In C.M. 1:6 In Foundation And Plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. Spec. No. As director by engineer in charge and BDG- 2 and 5 Complete.
27	ProvidingAutoclavedAeratedConcreteBlockmasonaryofEcoliteorequivalentmake conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) Complete As directed by engineer in charge
28	First Floor
29	ProvidingAutoclavedAeratedConcreteBlockmasonaryofEcoliteorequivalentmake conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech orequivalentinHalfbrickthickwallincludingstrikingjoints,rakingoutjointsand scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) As directed by engineer in charge
30	First Floor
31	Providing andapplying plaster withplaster of paris in 6mm thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete.. Spec.No. : As Directed By Engineer In Charge.
32	First Floor
33	Providingandapplyingplaster/wallpunningwithplasterofparis(withplasterofparis materialofAmbuja/MorChaporequivalentmake)in10to13millimeterthicknessto previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete.As directed by Engineer in charge.
34	First Floor
35	Providing Fine Cement Finish 1.5 mm Thick Over Green Plaster Surface including scaffolding curing etc. complete. Spec.No. : As Directed By Engineer In Charge.
36	Providing internal / external 20 mm thick Ready Mix plaster confirming to IS:4031(Part-4) 1988andIS383-1970inasingle coatusing Cementmortar ofproportion1:4containing special type of polymer additives about 0.4%, to all type of surfaces in all positions including scaffolding and curing complete As directed by Engineer Incharge
37	First Floor
38	Providing and fixing Chicken Mesh Of 22 Gauge, With About 30 Cm. Width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. Spec.No. : As Directed By Engineer In Charge.
39	First Floor
40	Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Rubyred / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. Spec. No.Bd.M. 3 B/Page Number 380
41	First Floor
42	Providing and laying Vitrified Matt Fininsh Tiles Having Size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring. Spec. No. Bd.M.12 Page No. 385.
43	First Floor
44	Providing and laying Vitrified Matt Finish Tiles Having Size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. b) Skirting
45	First Floor
46	Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of1:4cementmortarincludingneatcementfloat,fillingjoints,curingandclearing etc. complete.Bd.M. 12 Page Number385
47	First Floor
48	Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete. Bd.M. 12 Page Number385
49	First Floor
50	Providing 25 mm To 30 mm Thick Partition Of Polished Black Kadappa Stone Slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. a) One Side Polish. Spec. No. Bd.M.35 Page No.393.
51	First Floor
52	Providing and constructing Granite Kitchen Platform With Fixing Of Stainless Steel Sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) Spec. No. As Directed By Engineer In Charge.
53	First Floor
54	Providing and fixing Machine Cut Machine Polished Machine Cut 20 To 25 mm Thick Telephone Black / Amba White / Cat bary brown / RBI red / Ocean Brown Granite Stone For Treads And Risers Of Steps And Staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaningetc. complete.. Spec. No .BDM- 22, Page No. 390
55	First Floor
56	Providing and laying Telephone Black / Amba White / Cadburybrown / Ruby red / Ocean Brown Granite Stone Of 18 to 20 mm Thick For Door Frame / Dado / Window Boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing,etc. complete. Spec. No .As directed by Engineer-In- Charg
57	First Floor
58	Providing and fixing Heavy Duty Inter Locking Concrete Coloured Paving Blocks Of 60 mm Thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. comple. Spec. No. As Directed By Engineer In Charge.
59	Providing and Fabricating Structural Steel Work In Rolled Sections Like Joists, Channels, Angles, Tees Etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted / welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. Spec. No. Bd.C.2 Page No. 275
60	Providing andfixing colourcoatedZincalume (R)AZ150(min150gms/sq.mt.totalon each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength,metallichotdipcoatedwithAluminium-Zincalloy(55%aluminium 43.4%zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganicpigment).Thepaintshallhaveatotalcoatingthicknessofnominal35um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center.The endribshallbedesignedforanti-capillarygroove.andreturnleg.Thefeed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) As directed by Engineer in charge.
61	Providing and fixing 34 mm Thick Moulded Door Shutter Consisting Of Solid Core Single Leaf Fush Door Of 30 mm Thickness lipped with 15 mm ( 5mm x 3) thick x 30 mm width on one style and top rail and 10 mm (5mm x 2) thick x 30 mm width on other style and bottom rails. The inner panels laminated with 2 mm thick termite proof, water proof and fire resistant moulded PVC sheet with 2,4,6 design in different plain and /or prelim colours on one side after routing the moulded design on flush doors and 2 mm plain and /or pre lam PVC on other side using rubber adhesive on flush door and solvent cement adhesive on the PVC lipping etc. as per direction of Engineer in charge and manufacturers specification and drawing etc. complete.. Spec. No. As directed by Engineer in charge.
62	First Floor
63	Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coatofmetelprimerof approvedmake andmanufacture. M.Sframe shallbe coveredwith heat mouled PVC \"C\" channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 Kilogram/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and5 mm thick ,95mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the \" c \" channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3nos M.S.powdercoatedbuthingesofsize100mmx25MMx2mmusing32mmlongsteelscrewsdrilledsuitabletopassthroughboththewallsoftheM.Stube.Otherhardwares Spec. No. As directed by Engineer in charge.
64	First Floor
65	Providing and fixing in position (as per 1868 / 1982) Alluminium Sliding Window Of Three Tracks With Rectangular Pipe 95 x 38.10 x 0.90 mm At Weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With Colour Anodising With Box. Spec. No. As directed by engineer in charge.
66	First Floor
67	Providing and fixing in position Powder Coated Aluminium Louvered Windows / Ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. Spec. No. As directed by engineer in charge.
68	First Floor
69	Providing and fixing Mild Steel Grill Work For Windows, Ventilators Etc. 15Kg / Sqm as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete. Spec. No. Bd.U.1 Page No. 537.
70	First Floor
71	Providing and Fixing Mat Finish Stainless Steel (of 302 grade ) Railing With Top Pipe of 50 mm Dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use) Spec. No. As Directed By Engineer In Charge.
72	First Floor
73	Providing and applying Dezzly texture paint of approved make and approved barand exterior emultion paint of approved quality, colour and shade to old and new suface in teo coats, including exterior acrylic primer coat, scaffloding, prepparing the surface etc complete (Heat Reflective Paint).
74	First Floor
75	Providing andapplyingimpression 24 carrat Luxury paint of approved make &approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to newsurfaceintwocoats,includingsubsurfaceprparationbyAcrylicputtyandAcrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC).As directed by Engineer in charge
76	First Floor
77	Providing and applying Two Coats Of Synthetic Enamel Paint Of Approved Colour To New / Old Structural Steel Work And Wood Work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. Spec. No. Bd.O.5 Page No. 405.
78	First Floor
79	Providingandapplyingwaterproofingtreatmentusingacrylicpolymermodifiedcement basedwaterproofingcoatingwithfibreglassmeshmixingattherateofpowdertoliquid (2:1)byweightcovering9to10SquareMetre/Kilogramwithtwocoatusingapproved chemicals for masonry andconcrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. BDJAs directed by Engineer in charge First Floor
80	Providing Water Proof Bedding For Flooring Of Bath And W. C.25 mm Thick In C. M. 1:3 Including Using Approved Water Proofing Compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/including ponding test etc. complete. Spec .No. As directed by Engineer in charge.
81	Painting Letters Upto 20 Centimetre Height including cost of brushes, coir brushes dusting, cleaning etcetera complete. Spec. No. As Directed By Engineer In Charge. Only For Road Side Furniture. Spec .No. MORTH 801
82	Providing and fixingOrissa Pan of size 580x445x260 mm with approved make flush valve including trap, C.I. soil andvent pipe upto outside face ofwall including 100mm dia.C.I. plug, bend and necessary pipe connection, etc complete. As directed by Engineer in charge. Spec. No. As directed by Engineer in Charge.
83	First Floor
84	Providing and fixingwall hung white wash basin of size 350x450x165mm with approved make pillar cock, C.P. Angular stop cock long thread approved make continentalincluding SS bottle trap of approved make having necessary pipe connection up to the outside face of the wall etc complete as directed by Engineer in charge.As Per SSr Item No.48.32
85	First Floor
86	Providing and fixing Stainless Steel Sink Of Size 600 x 510 x 200 mm Of Nirali Or Equivalent Make incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. Spec. No. As directed by Engineer in charge.
87	Providing and fixing C. P. Sink Cock With Raised \"J\" Shaped Swinging Casted Spout Jaquar Or Equivalent Make Continental (CAT. NO. CON 359) including necessary sockets / union nut etc. complete. Spec. No. As directed by Engineer in charge.
88	Providing and fixing C. P. BIB Cock With Wall Flange Jaquar Or Equivalent Make Continental (CAT. NO. CON047) including necessary sockets/ union nut etc. complete. Spec. No. Bd.V.8 Page No.554.
89	Providing and fixing C. P. Pillar Cock Long Neck With Aerator Jaquar Or Equivalent Make Continental (CAT. NO. CON 021) including necessary sockets / union nut etc. complete. Spec.No. As directed by Engineer in charge.
90	Providing and fixing C. P. Angular Stop Clock With Wall Flange Jaquar Make Or Equivalent Continental (CAT. NO. CON 059) including necessary sockets/union nut etc. complete. Spec.No. As directed by Engineer in charge.
91	Providing and Fixing Half Turn 25 mm Dia Gun Metal Flushing Cock including all accessories etc. complete. Spec. No. As directed by Engineer in charge.
92	Providing and fixing Chromium Plated Towel Rod 16 mm Dia And 75 Cm. In Length including all accessories complete. Spec. No. As directed by Engineer in charge.
93	Providing and fixing 450 mm x 550 mm Size Superior Type Belgium Mirror with 16mm dia. nickel plated towel rod etc. complete. Spec. No. As Directed By Engineer In Charge.
94	Providing and fixing 15 Cm Rigid PVC Nahani Trap Including PVC Grating, Bend, Connecting Piece Of UPVC Pipe Up To The Outside Face Of Wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use). Spec. No. As directed by Engineer in charge.
95	Providing and fixing 75 mm Dia Stabiliser Pipe / P.V.C. Soil Vent / Waste Pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete Spec. No. As directed by Engineer in charge.
96	Providing , laying and fixing ,jointing Supreme Eco- Drain 110 mm SN 8 Nu- Drain UPVC Pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete. Spec. No. As Directed By Engineer In Charge.
97	Providing , laying and fixing ,jointing Supreme Eco- Drain 160 mm SN 4 Nu- Drain UPVC Pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees , coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc. complete. Spec. No. As Directed By Engineer In Charge.
98	Providing,constructingandfixing 250mmdia.InspectionchambermadeupofUPVC material of thickness 3.5 mm and height of 259 mm with inlet and outlet of 110 mm dia. with 75 mm dia. U Trap, Ultra shaft pipe of Upvc material having height of 470 mm and fixing Ultra 250 mm dia. UPVC cover and frame in 150 mm thick in c.c.1:2:4, having crushed sand bedof100mmthickofsize550mmdia.Includingexcavationandrefillingthesidesof chamberbycrushedsandcushioning150mmthickness,connectingallrequiredUPVC fittings with rubber lubricant etc. complete. Spec.
99	Providing , constructing and fixing450 mm dia. Inspection chamber made up of Polypropylene/polyethylenematerialHaving315mmdiameterinlet(s)/outletsandwith eccentric reducers as per requirement to connect 160 mm and 200 mm pipes having thickness of5mmand600mminheight,withinbuiltshaftachievetheinvertdepthaspersite condition of wall thickness of 5 mm having R.C.C. cover and frame fixing in 150 mm thick in c.c.1:2:4, having crushed sand bed of 150 mm thick of size 750 mm dia. Including excavation and refilling the sides of chamber by ?sand crushed cushioning 150 mm thickness, connecting all required UPVC fittings with rubber lubricant etc.complete..Spec.As Directected By Engineer Incharge
100	Providing and fixing 15 mm. Dia Ball Cock Medium Type With PVC Float including sockets & necessary fittings and tested as per municipal requirements etc. complete. Spec. No. As directed by Engineer in charge.
101	Providing and fixing P.V.C. Rain Water Pipes Of 160 mm Outer Diameter And Having Wall Thickness Of 2.2 To 2.7 mm Confirming To I.S. 135921992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment) Spec. No. As directed by Engineer in charge.
102	Providing and fixing in position Unplasticized Polyvinyl Chloride (UPVC) Ultra Voilet Stabilized 110mm Outer diameter Cowl Dome Confirming To IS 4985 including making joint with solvent cement etc. complete. Spec. No. As directed by Engineer in charge.
103	Providing and fixing H.D.P Container Syntex Or Alike One Piece Moulded Water Tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks Capacity Above 1000 To 20,000 Litres
104	Providing and fixing on Walls / Ceiling / Floor 15 mm Dia. CPVC Pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer incharge
105	Providing and fixing on Walls / Ceiling / Floor 20 mm Dia. CPVC Pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer incharge
106	Providing and fixing on Walls / Ceiling / Floor 25 mm Dia. CPVC Pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer incharge
107	Providing Soak Pit Of Size 120 Cm x 120 Cm x 120 Cm including excavation and filling with brick bats. Spec. No. Bd.V.46 Page No.576.
108	Construction of New(type IIStaff Qtr 4 Nos Quarter:- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removingtheexcavatedmaterialuptoadistanceof50m.beyondthebuildingareaand stackingandspreadingasdirected,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Bd.A.1 Page One Number 259
109	Excavation for Foundation In Hard Murum including removing the excavated materials upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ram
110	Providing Preconstructional Antitermite Treatment As Per I.S. 6313 (PartII) By Treating The Bottom Surface And Sides Of Excavation at the rate of 5 litres of emulsion concentrate of 0.5 percent of clorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. Spec. No. As Directed By Engineer In Charge.
111	Providing Ppreconstructional Antitermite Treatment As Per I.S. 6313 (PartII) By Treating The Top Surface Of Plinth Filling at the rate of 5 litres of emulsion concentrate at 0.5 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. ( AS per Item no. 22.43 of schedule of rates of NBO ) Spec.No. : As Directed By Engineer In Charge.
112	Providing Soling Using 80 mm Size Trap Metal In 15 Cm. Layer including filling voids withCrushed Sand / grit, ramming, watering complete. Spec.No. : As Directed By Engineer In Charge.
113	Filling In Plinth And Floors With Approved Excavated Materials In 15 Cm To 20 Cm Layers including watering and compaction complete. Spec. No Bd. A. 10 Page No. 262
114	Filling In Plinth And Floors With Contractor\"s Soil, Sand Or Murum In 15 Cm To 20 Cm Layers including watering and compaction complete. Spec. No. Bd.A 11, Page No. 263
115	Providing and laying in Cast In Situ / Ready Mix Cement Concrete In M-10 Of Trap / Granite / Quartzite / Gneiss Metal For Foundation And Bedding including bailing out water, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With Natural Sand / V.S.I. Quality Artificial Sand. Spec. No. Bd.E.1 Page No. 287
116	Providing and laying in Cast In Situ / Ready Mix Cement Concrete M-25 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Work In Foundations Llike Raft, Strip Foundations, Grillage And Footings of R.C.C. Columns and steel stanchions etc. including bailing out water, formwork, cover blocks,laying / pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. etc. complete, With fully automatic micro processor based PLC with SCADA enabled reversible. Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With Natural Sand / V.S.I. Quality Artificial Sand. Spec. No. Bd.F.3 Page No. 298 and B.7, Page No. 38
117	Providing and casting in Cast In Situ / Ready Mix Cement Concrete M-25 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan Mixer) etc. complete. With Natural Sand / V.S.I. Quality Artificial Sand. Spec. No. Bd.F.5 Page No. 300 And B7, Page No 38.
118	First Floor
119	Providing & casting in Cast In Situ / Ready Mix Cement Concrete M-25 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Beams And Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan Mixer) etc. complete. With Natural Sand / V.S.I. Quality Artificial Sand. Spec. No. Bd.F.6 Page No. 300 and B.7, Page No.38
120	First Floor
121	Providing & casting in Cast In Situ / Ready Mix Cement Concrete M-25 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Chajja as per detailed design & drawings including centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. Spec. No. Bd.F.9 Page No. 303 and B.7, Page No.38
122	Providing and casting in Situ / /Ready Mix Cement Concrete M-25 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Slabs And Landings as per detailed designs and drawings including centering, formwork, cover blocks compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan Mixer) etc. complete. With Natural Sand / V.S.I. Quality Artificial Sand.. Spec. No. Bd.F.8 Page No. 302 and B.7, Page No.38
123	Providing and casting inCast In Situ / Ready Mix Cement Concrete M-25 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Pardi of required thickness including centering, formwork, cover blocks, laying / pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Spec. No. Bd.F.11 Page No. 304 and B.7, Page No. 38
124	Providing and laying Cast In Situ / Ready Mix Cement Concrete M-25 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Waist Slab, And Steps Of Staircases as per detailed design and drawings or as directed including steel centering, plywood / steel formwork, steel props, laying / pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With Natural Sand / V.S.I. Quality Artificial Sand. Spec. No. : Bd.F. 13 Page No. 305. /I.S. 456 (2000)
125	Providing and laying Cast In Situ / Ready Mix Cement Concrete M-15 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C.Coping To Plinth Or Parapet Moulded Or Chamfered As Per Drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) Spec. No. Bd.E. 3/Page No. 288/I.S. 456 (2000)
126	First Floor
127	Providing and fixing in position TMT FE - 500 Bar Reinforcement Of Various Diameters For R.C.C. Pile Caps, Footings, Foundations, Slabs, Beams Columns, Canopies, Staircase, Newels, Chajjas, Lintels Pardis, Copings, Fins, Arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec. No. Bd.F.17 Page No.306.
128	First Floor
129	Providing Fly Ash Brick Masonry With Conventional / I.S. Type Fly Ash Bricks In C.M. 1:6 In Foundation And Plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. Spec. No. As director by eng
130	ProvidingAutoclavedAeratedConcreteBlockmasonaryofEcoliteorequivalentmake conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking ou
131	First Floor
132	ProvidingAutoclavedAeratedConcreteBlockmasonaryofEcoliteorequivalentmake conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech orequivalentinHalfbrickthickwallincludingstrikingj
133	Providing andapplying plaster withplaster of paris in 6mm thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete.. Spec.No. : As Directed By Engineer In Charge.
134	Providingandapplyingplaster/wallpunningwithplasterofparis(withplasterofparis materialofAmbuja/MorChaporequivalentmake)in10to13millimeterthicknessto previously plastered surface / or on newly br
135	Providing Fine Cement Finish 1.5 mm Thick Over Green Plaster Surface including scaffolding curing etc. complete. Spec.No. : As Directed By Engineer In Charge.
136	Providing internal / external 20 mm thick Ready Mix plaster confirming to IS:4031(Part-4) 1988andIS383-1970inasingle coatusing Cementmortar ofproportion1:4containing special type of polymer additives about 0.4%, to all type of surf
137	First Floor
138	Providing and fixing Chicken Mesh Of 22 Gauge, With About 30 Cm. Width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. Spec.No. : As Directed By Engineer In Charge.
139	Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Rubyred / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing i
140	Providing and laying Vitrified Matt Fininsh Tiles Having Size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement
141	Providing and laying Vitrified Matt Finish Tiles Having Size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement m
142	Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required
143	Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required posit
144	Providing 25 mm To 30 mm Thick Partition Of Polished Black Kadappa Stone Slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. a) One Side Polish. Spec. No. Bd.M.35 Page No.393.
145	Providing and constructing Granite Kitchen Platform With Fixing Of Stainless Steel Sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) Spec. No. As Directed By Engineer In Charge.
146	Providing and fixing Machine Cut Machine Polished Machine Cut 20 To 25 mm Thick Telephone Black / Amba White / Cat bary brown / RBI red / Ocean Brown Granite Stone For Treads And Risers Of Steps And Staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaningetc. complete.. Spec. No .BDM- 22, Page No. 390
147	Providing and laying Telephone Black / Amba White / Cadburybrown / Ruby red / Ocean Brown Granite Stone Of 18 to 20 mm Thick For Door Frame / Dado / Window Boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing,etc. complete. Spec. No .As directed by Engineer-In- Charg
148	Providing and fixing Heavy Duty Inter Locking Concrete Coloured Paving Blocks Of 60 mm Thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. comple. Spec. No. As Directed By Engineer In Charge.
149	Providing and Fabricating Structural Steel Work In Rolled Sections Like Joists, Channels, Angles, Tees Etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted / welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. Spec. No. Bd.C.2 Page No. 275
150	Providing andfixing colourcoatedZincalume (R)AZ150(min150gms/sq.mt.totalon each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength st
151	Providing and fixing 34 mm Thick Moulded Door Shutter Consisting Of Solid Core Single Leaf Fush Door Of 30 mm Thickness lipped with 15 mm ( 5mm x 3) thick x 30 mm width on one style and top rail and 10 mm (5mm x 2) thick x 30 mm width on other style and bottom rails. The inner panels laminated with 2 mm thick termite proof, water proof and fire resistant moulded PVC sheet with 2,4,6 design in different plain and /or prelim colours on one side after routing the moulded design on flush doors and 2 mm plain and /or pre lam PVC on other side using rubber adhesive on flush door and solvent cement adhesive on the PVC lipping etc. as per direction of Engineer in charge and manufacturers specification and drawing etc. complete.. Spec. No. As directed by Engineer in charge.
152	First Floor
153	Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coato
154	Providing and fixing in position (as per 1868 / 1982) Alluminium Sliding Window Of Three Tracks With Rectangular Pipe 95 x 38.10 x 0.90 mm At Weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With Colour Anodising With Box. Spec. No. As directed by engineer in charge.
155	Providing and fixing in position Powder Coated Aluminium Louvered Windows / Ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. Spec. No. As directed by engineer in charge.
156	Providing and fixing Mild Steel Grill Work For Windows, Ventilators Etc. 15Kg / Sqm as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete. Spec. No. Bd.U.1 Page No. 537.
157	Providing and Fixing Mat Finish Stainless Steel (of 302 grade ) Railing With Top Pipe of 50 mm Dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use) Spec. No. As Directed By Engineer In Charge.
158	Providing and applying Dezzly texture paint of approved make and approved barand exterior emultion paint of approved quality, colour and shade to old and new suface in teo coats, including exterior acrylic primer coat, scaffloding, prepparing the surface
159	Providing andapplyingimpression 24 carrat Luxury paint of approved make &approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to newsurfaceintwocoats,includingsubsurfaceprparationby
160	Providing and applying Two Coats Of Synthetic Enamel Paint Of Approved Colour To New / Old Structural Steel Work And Wood Work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. Spec. No. Bd.O.5 Page No. 405.
161	Providingandapplyingwaterproofingtreatmentusingacrylicpolymermodifiedcement basedwaterproofingcoatingwithfibreglassmeshmixingattherateofpowdertoliquid (2:1)byweightcovering9to10SquareMetre
162	Providing Water Proof Bedding For Flooring Of Bath And W. C.25 mm Thick In C. M. 1:3 Including Using Approved Water Proofing Compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/including ponding test etc. complete. Spec .No. As directed by Engineer in charge.
163	Painting Letters Upto 20 Centimetre Height including cost of brushes, coir brushes dusting, cleaning etcetera complete. Spec. No. As Directed By Engineer In Charge. Only For Road Side Furniture. Spec .No. MORTH 801
164	Providing and fixingOrissa Pan of size 580x445x260 mm with approved make flush valve including trap, C.I. soil andvent pipe upto outside face ofwall including 100mm dia.C.I. plug, bend and necessary pipe connection, etc complete. As directed by En
165	Providing and fixingwall hung white wash basin of size 350x450x165mm with approved make pillar cock, C.P. Angular stop cock long thread approved make continentalincluding SS bottle trap of approved make having necessary pipe connection up to the outsi
166	Providing and fixing Stainless Steel Sink Of Size 600 x 510 x 200 mm Of Nirali Or Equivalent Make incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. Spec. No. As directed by Engineer in charge.
167	Providing and fixing C. P. Sink Cock With Raised \"J\" Shaped Swinging Casted Spout Jaquar Or Equivalent Make Continental (CAT. NO. CON 359) including necessary sockets / union nut etc. complete. Spec. No. As directed by Engineer in charge.
168	Providing and fixing C. P. BIB Cock With Wall Flange Jaquar Or Equivalent Make Continental (CAT. NO. CON047) including necessary sockets/ union nut etc. complete. Spec. No. Bd.V.8 Page No.554.
169	Providing and fixing C. P. Pillar Cock Long Neck With Aerator Jaquar Or Equivalent Make Continental (CAT. NO. CON 021) including necessary sockets / union nut etc. complete. Spec.No. As directed by Engineer in charge.
170	Providing and fixing C. P. Angular Stop Clock With Wall Flange Jaquar Make Or Equivalent Continental (CAT. NO. CON 059) including necessary sockets/union nut etc. complete. Spec.No. As directed by Engineer in charge.
171	Providing and Fixing Half Turn 25 mm Dia Gun Metal Flushing Cock including all accessories etc. complete. Spec. No. As directed by Engineer in charge.
172	Providing and fixing Chromium Plated Towel Rod 16 mm Dia And 75 Cm. In Length including all accessories complete. Spec. No. As directed by Engineer in charge.
173	Providing and fixing 450 mm x 550 mm Size Superior Type Belgium Mirror with 16mm dia. nickel plated towel rod etc. complete. Spec. No. As Directed By Engineer In Charge.
174	Providing and fixing 15 Cm Rigid PVC Nahani Trap Including PVC Grating, Bend, Connecting Piece Of UPVC Pipe Up To The Outside Face Of Wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use). Spec. No. As directed by Engineer in charge.
175	Providing and fixing 75 mm Dia Stabiliser Pipe / P.V.C. Soil Vent / Waste Pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete Spec. No. As directed by Engineer in charge.
176	Providing , laying and fixing ,jointing Supreme Eco- Drain 110 mm SN 8 Nu- Drain UPVC Pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete. Spec. No. As Directed By Engineer In Charge.
177	Providing , laying and fixing ,jointing Supreme Eco- Drain 160 mm SN 4 Nu- Drain UPVC Pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees , coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc. complete. Spec. No. As Directed By Engineer In Charge.
178	Providing,constructingandfixing 250mmdia.InspectionchambermadeupofUPVC material of thickness 3.5 mm and height of 259 mm with inlet and outlet of 110 mm dia. with 75 mm dia. U Trap, Ultra shaft pipe of Upvc material having height of 470 mm and fixing Ultra 250 mm dia. UPVC cover and frame in 150 mm thick in c.c.1:2:4, having crushed sand bedof100mmthickofsize550mmdia.Includingexcavationandrefillingthesidesof chamberbycrushedsandcushioning150mmthickness,connectingallrequiredUPVC fittings with rubber lubricant etc. complete. Spec.
179	Providing , constructing and fixing450 mm dia. Inspection chamber made up of Polypropylene/polyethylenematerialHaving315mmdiameterinlet(s)/outletsandwith eccentric reducers as per requirement to connect 160 mm and 200 mm pipes having thickness of5mmand600mminheight,withinbuiltshaftachievetheinvertdepthaspersite condition of wall thickness of 5 mm having R.C.C. cover and frame fixing in 150 mm thick in c.c.1:2:4, having crushed sand bed of 150 mm thick of size 750 mm dia. Including excavation and refilling the sides of chamber by ?sand crushed cushioning 150 mm thickness, connecting all required UPVC fittings with rubber lubricant etc.complete..Spec.As Directected By Engineer Incharge
180	Providing and fixing 15 mm. Dia Ball Cock Medium Type With PVC Float including sockets & necessary fittings and tested as per municipal requirements etc. complete. Spec. No. As directed by Engineer in charge.
181	Providing and fixing P.V.C. Rain Water Pipes Of 160 mm Outer Diameter And Having Wall Thickness Of 2.2 To 2.7 mm Confirming To I.S. 135921992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment) Spec. No. As directed by Engineer in charge.
182	Providing and fixing in position Unplasticized Polyvinyl Chloride (UPVC) Ultra Voilet Stabilized 110mm Outer diameter Cowl Dome Confirming To IS 4985 including making joint with solvent cement etc. complete. Spec. No. As directed by Engineer in charge. First floor
183	Providing and fixing H.D.P Container Syntex Or Alike One Piece Moulded Water Tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks Capacity Above 1000 To 20,000 Litres
184	Providing and fixing on Walls / Ceiling / Floor 15 mm Dia. CPVC Pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer incharge
185	Providing and fixing on Walls / Ceiling / Floor 20 mm Dia. CPVC Pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer incharge
186	Providing and fixing on Walls / Ceiling / Floor 25 mm Dia. CPVC Pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer incharge
187	Providing Soak Pit Of Size 120 Cm x 120 Cm x 120 Cm including excavation and filling with brick bats. Spec. No. Bd.V.46 Page No.576.
188	Construction of New(type II1StaffQuarter 8 Nos & other works:- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removingtheexcavatedmaterialuptoadistanceof50m.beyondthebuildingareaand stackingandspreadingasdirected,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Bd.A.1 Page One Number 259
189	Excavation for Foundation In Hard Murum including removing the excavated materials upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50m) Spec.No. : Bd.A.2, Page No. 259.
190	Providing preconstructional antitermitetreatment as per I.S. 6313 (Par t -II) by t reat ing the bot tom sur face and sides of excavat ion at the rate of 5 litres of emulsion concent rate of 1.0 percent of chlorophyr i fos per square meter of sur face area cover ing 10 years guarantee on bond paper .
191	Providing Ppreconstructional Antitermite Treatment As Per I.S. 6313 (PartII) By Treating The Top Surface Of Plinth Filling at the rate of 5 litres of emulsion concentrate at 0.5 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. ( AS per Item no. 22.43 of schedule of rates of NBO ) Spec.No. : As Directed By Engineer In Charge.
192	Providing Soling Using 80 mm Size Trap Metal In 15 Cm. Layer including filling voids withCrushed Sand / grit, ramming, watering complete. Spec.No. : As Directed By Engineer In Charge.
193	Filling In Plinth And Floors With Approved Excavated Materials In 15 Cm To 20 Cm Layers including watering and compaction complete. Spec. No Bd. A. 10 Page No. 262
194	Filling In Plinth And Floors With Contractor\"s Soil, Sand Or Murum In 15 Cm To 20 Cm Layers including watering and compaction complete. Spec. No. Bd.A 11, Page No. 263
195	Providing and laying in Cast In Situ / Ready Mix Cement Concrete In M-10 Of Trap / Granite / Quartzite / Gneiss Metal For Foundation And Bedding including bailing out water, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With Natural Sand / V.S.I. Quality Artificial Sand. Spec. No. Bd.E.1 Page No. 287
196	Providing and laying in Cast In Situ / Ready Mix Cement Concrete M-25 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Work In Foundations Llike Raft, Strip Foundations, Grillage And Footings of R.C.C. Columns and steel stanchions etc. including bailing out water, formwork, cover blocks,laying / pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. etc. complete, With fully automatic micro processor based PLC with SCADA enabled reversible. Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With Natural Sand / V.S.I. Quality Artificial Sand. Spec. No. Bd.F.3 Page No. 298 and B.7, Page No. 38
197	Providing and casting in Cast In Situ / Ready Mix Cement Concrete M-25 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan Mixer) etc. complete. With Natural Sand / V.S.I. Quality Artificial Sand. Spec. No. Bd.F.5 Page No. 300 And B7, Page No 38.
198	First Floor
199	Providing & casting in Cast In Situ / Ready Mix Cement Concrete M-25 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Beams And Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan Mixer) etc. complete. With Natural Sand / V.S.I. Quality Artificial Sand. Spec. No. Bd.F.6 Page No. 300 and B.7, Page No.38
200	Providing & casting in Cast In Situ / Ready Mix Cement Concrete M-25 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Chajja as per detailed design & drawings including centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. Spec. No. Bd.F.9 Page No. 303 and B.7, Page No.38
201	First Floor
202	Providing and casting in Situ / /Ready Mix Cement Concrete M-25 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Slabs And Landings as per detailed designs and drawings including centering, formwork, cover blocks compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan Mixer) etc. complete. With Natural Sand / V.S.I. Quality Artificial Sand.. Spec. No. Bd.F.8 Page No. 302 and B.7, Page No.38
203	Providing and casting inCast In Situ / Ready Mix Cement Concrete M-25 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Pardi of required thickness including centering, formwork, cover blocks, laying / pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Spec. No. Bd.F.11 Page No. 304 and B.7, Page No. 38
204	First Floor
205	Providing and laying Cast In Situ / Ready Mix Cement Concrete M-25 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Waist Slab, And Steps Of Staircases as per detailed design and drawings or as directed including steel centering, plywood / steel formwork, steel props, laying / pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With Natural Sand / V.S.I. Quality Artificial Sand. Spec. No. : Bd.F. 13 Page No. 305. /I.S. 456 (2000)
206	Providing and laying Cast In Situ / Ready Mix Cement Concrete M-15 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C.Coping To Plinth Or Parapet Moulded Or Chamfered As Per Drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) Spec. No. Bd.E. 3/Page No. 288/I.S. 456 (2000)
207	Providing and fixing in position TMT FE - 500 Bar Reinforcement Of Various Diameters For R.C.C. Pile Caps, Footings, Foundations, Slabs, Beams Columns, Canopies, Staircase, Newels, Chajjas, Lintels Pardis, Copings, Fins, Arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec. No. Bd.F.17 Page No.306.
208	First Floor
209	Providing Fly Ash Brick Masonry With Conventional / I.S. Type Fly Ash Bricks In C.M. 1:6 In Foundation And Plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. Spec. No. As director by engineer in charge and BDG- 2 and 5 Complete.
210	ProvidingAutoclavedAeratedConcreteBlockmasonaryofEcoliteorequivalentmake conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) Complete As directed by engineer in charge
211	First Floor
212	ProvidingAutoclavedAeratedConcreteBlockmasonaryofEcoliteorequivalentmake conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech orequivalentinHalfbrickthickwallincludingstrikingjoints,rakingoutjointsand scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) As directed by engineer in charge
213	Providing andapplying plaster withplaster of paris in 6mm thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete.. Spec.No. : As Directed By Engineer In Charge.
214	Providingandapplyingplaster/wallpunningwithplasterofparis(withplasterofparis materialofAmbuja/MorChaporequivalentmake)in10to13millimeterthicknessto previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete.As directed by Engineer in charge.
215	First Floor
216	Providing Fine Cement Finish 1.5 mm Thick Over Green Plaster Surface including scaffolding curing etc. complete. Spec.No. : As Directed By Engineer In Charge.
217	Providing internal / external 20 mm thick Ready Mix plaster confirming to IS:4031(Part-4) 1988andIS383-1970inasingle coatusing Cementmortar ofproportion1:4containing special type of polymer additives about 0.4%, to all type of surfaces in all positions including scaffolding and curing complete As directed by Engineer Incharge
218	First Floor
219	Providing and fixing Chicken Mesh Of 22 Gauge, With About 30 Cm. Width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. Spec.No. : As Directed By Engineer In Charge.
220	First Floor
221	Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Rubyred / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. Spec. No.Bd.M. 3 B/Page Number 380
222	Providing and laying Vitrified Matt Fininsh Tiles Having Size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring. Spec. No. Bd.M.12 Page No. 385.
223	Providing and laying Vitrified Matt Finish Tiles Having Size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. b) Skirting
224	Providing and laying Vitrified Matt Fininsh Tiles Having Size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring. Spec. No. Bd.M.12 Page No. 385.
225	Providing and laying Vitrified Matt Fininsh Tiles Having Size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring. Spec. No. Bd.M.12 Page No. 385.
226	Providing 25 mm to 30 mm thick partition of polished black kadappa stone slab of approved quali ty including giving required size and shape etc. Fixing in cement mor tar 1:3 curing and cement etc.complete.a) One side polish
227	Providing and constructing Granite Kitchen Platform With Fixing Of Stainless Steel Sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) Spec. No. As Directed By Engineer In Charge.
228	Providing and fixing Machine Cut Machine Polished Machine Cut 20 To 25 mm Thick Telephone Black / Amba White / Cat bary brown / RBI red / Ocean Brown Granite Stone For Treads And Risers Of Steps And Staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaningetc. complete.. Spec. No .BDM- 22, Page No. 390
229	Providing and laying Telephone Black / Amba White / Cadburybrown / Ruby red / Ocean Brown Granite Stone Of 18 to 20 mm Thick For Door Frame / Dado / Window Boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing,etc. complete. Spec. No .As directed by Engineer-In- Charg
230	Providing and fixing Heavy Duty Inter Locking Concrete Coloured Paving Blocks Of 80 mm Thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. comple. Spec. No. As Directed By Engineer In Charge.
231	Providing and Fabricating Structural Steel Work In Rolled Sections Like Joists, Channels, Angles, Tees Etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted / welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. Spec. No. Bd.C.2 Page No. 275
232	Providing and fixing of colour coated Zinc aluminium ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( withinorganicpigment).Thepaintshallhave atotalcoatingthicknessofnominal35um, comprising of nominal 25um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center.Theendribshallbedesignedforanti-capacitygroove.andreturnleg.Thefeed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre)900 mm girth (Surface Width). Spec. No. Bd.R.5, Page No. 453
233	Providing and fixing 34 mm Thick Moulded Door Shutter Consisting Of Solid Core Single Leaf Fush Door Of 30 mm Thickness lipped with 15 mm ( 5mm x 3) thick x 30 mm width on one style and top rail and 10 mm (5mm x 2) thick x 30 mm width on other style and bottom rails. The inner panels laminated with 2 mm thick termite proof, water proof and fire resistant moulded PVC sheet with 2,4,6 design in different plain and /or prelim colours on one side after routing the moulded design on flush doors and 2 mm plain and /or pre lam PVC on other side using rubber adhesive on flush door and solvent cement adhesive on the PVC lipping etc. as per direction of Engineer in charge and manufacturers specification and drawing etc. complete.. Spec. No. As directed by Engineer in charge.
234	Providing and fixing Fiber Glass Reinforced Polyster Door Shutter 30 mm Thick As Per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. Spec. No. As directed by Engineer in charge.
235	Providing and fixing in position (as per 1868 / 1982) Alluminium Sliding Window Of Three Tracks With Rectangular Pipe 95 x 38.10 x 0.90 mm At Weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With Colour Anodising With Box. Spec. No. As directed by engineer in charge.
236	First Floor
237	Providing and fixing in position Powder Coated Aluminium Louvered Windows / Ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. Spec. No. As directed by engineer in charge.
238	Providing and fixing Mild Steel Grill Work For Windows, Ventilators Etc. 15Kg / Sqm as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete. Spec. No. Bd.U.1 Page No. 537.
239	First Floor
240	Providing and Fixing Mat Finish Stainless Steel (of 302 grade ) Railing With Top Pipe of 50 mm Dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use) Spec. No. As Directed By Engineer In Charge.
241	Providing and applying Dezzly texture paint of approved make and approved barand exterior emultion paint of approved quality, colour and shade to old and new suface in teo coats, including exterior acrylic primer coat, scaffloding, prepparing the surface etc complete (Heat Reflective Paint).
242	Providing andapplyingimpression 24 carrat Luxury paint of approved make &approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to newsurfaceintwocoats,includingsubsurfaceprparationbyAcrylicputtyandAcrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC).As directed by Engineer in charge
243	First Floor
244	Providing and applying Two Coats Of Synthetic Enamel Paint Of Approved Colour To New / Old Structural Steel Work And Wood Work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. Spec. No. Bd.O.5 Page No. 405.
245	First Floor
246	Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixedwithapprovedwaterproofingcompound.Markingfinishedsurfacewithfalse squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for requiredheight,withdripmouldatthejunctionofplasterandparapetandcuringand covering10yearsGuaranteeagainstleakproofnessonCourtfeestamppaperofRs.500/- including ponding test etc. complete.BDJ As directed by Engineer in charge. SSR Item No.31.04
247	Painting Letters Upto 20 Centimetre Height including cost of brushes, coir brushes dusting, cleaning etcetera complete. Spec. No. As Directed By Engineer In Charge. Only For Road Side Furniture. Spec .No. MORTH 801
248	Providing and fixing white european type wall-hung, of size 360mm x 360mm x 575mm with flushvalveofapproved make includingsoilpipe,ventpipeuptooutsidefaceofwall, 100mm dia C.I. plug bendinlet pipe all fittings,cutting & making good walls, floors etc as directed by Engineer in charge. Spec. No. As Directed By Engineer In Charge.
249	Providing and fixingOrissa Pan of size 580x445x260 mm with approved make flush valve including trap, C.I. soil andvent pipe upto outside face ofwall including 100mm dia.C.I. plug, bend and necessary pipe connection, etc complete. As directed by Engineer in charge. Spec. No. As directed by Engineer in Charge.
250	Providing and fixingwall hung white wash basin of size 350x450x165mm with approved make pillar cock, C.P. Angular stop cock long thread approved make continentalincluding SS bottle trap of approved make having necessary pipe connection up to the outside face of the wall etc complete as directed by Engineer in charge.As Per SSr Item No.48.32
251	Providing and fixing Stainless Steel Sink Of Size 600 x 510 x 200 mm Of Nirali Or Equivalent Make incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. Spec. No. As directed by Engineer in charge.
252	Providing and fixing C. P. Sink Cock With Raised \"J\" Shaped Swinging Casted Spout Jaquar Or Equivalent Make Continental (CAT. NO. CON 359) including necessary sockets / union nut etc. complete. Spec. No. As directed by Engineer in charge.
253	Providing and fixing C. P. BIB Cock With Wall Flange Jaquar Or Equivalent Make Continental (CAT. NO. CON047) including necessary sockets/ union nut etc. complete. Spec. No. Bd.V.8 Page No.554.
254	Providing and fixing C. P. Pillar Cock Long Neck With Aerator Jaquar Or Equivalent Make Continental (CAT. NO. CON 021) including necessary sockets / union nut etc. complete. Spec.No. As directed by Engineer in charge.
255	Providing and fixing C. P. Angular Stop Clock With Wall Flange Jaquar Make Or Equivalent Continental (CAT. NO. CON 059) including necessary sockets/union nut etc. complete. Spec.No. As directed by Engineer in charge.
256	Providing and Fixing Half Turn 25 mm Dia Gun Metal Flushing Cock including all accessories etc. complete. Spec. No. As directed by Engineer in charge.
257	Providing and fixing Chromium Plated Towel Rod 16 mm Dia And 75 Cm. In Length including all accessories complete. Spec. No. As directed by Engineer in charge.
258	Providing and fixing 450 mm x 550 mm Size Superior Type Belgium Mirror with 16mm dia. nickel plated towel rod etc. complete. Spec. No. As Directed By Engineer In Charge.
259	Providing and fixing 15 Cm Rigid PVC Nahani Trap Including PVC Grating, Bend, Connecting Piece Of UPVC Pipe Up To The Outside Face Of Wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use). Spec. No. As directed by Engineer in charge.
260	Providing and fixing 75 mm Dia Stabiliser Pipe / P.V.C. Soil Vent / Waste Pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete Spec. No. As directed by Engineer in charge.
261	Providing , laying and fixing ,jointing Supreme Eco- Drain 110 mm SN 8 Nu- Drain UPVC Pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete. Spec. No. As Directed By Engineer In Charge.
262	Providing , laying and fixing ,jointing Supreme Eco- Drain 160 mm SN 4 Nu- Drain UPVC Pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees , coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc. complete. Spec. No. As Directed By Engineer In Charge.
263	Providing and laying Concrete Pipes Of I. S. NP.Class Of 300 mm Diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Spec. No. Bd.V.41 Page No.573.
264	Providing,constructingandfixing 250mmdia.InspectionchambermadeupofUPVC material of thickness 3.5 mm and height of 259 mm with inlet and outlet of 110 mm dia. with 75 mm dia. U Trap, Ultra shaft pipe of Upvc material having height of 470 mm and fixing Ultra 250 mm dia. UPVC cover and frame in 150 mm thick in c.c.1:2:4, having crushed sand bedof100mmthickofsize550mmdia.Includingexcavationandrefillingthesidesof chamberbycrushedsandcushioning150mmthickness,connectingallrequiredUPVC fittings with rubber lubricant etc. complete. Spec.
265	Providing , constructing and fixing450 mm dia. Inspection chamber made up of Polypropylene/polyethylenematerialHaving315mmdiameterinlet(s)/outletsandwith eccentric reducers as per requirement to connect 160 mm and 200 mm pipes having thickness of5mmand600mminheight,withinbuiltshaftachievetheinvertdepthaspersite condition of wall thickness of 5 mm having R.C.C. cover and frame fixing in 150 mm thick in c.c.1:2:4, having crushed sand bed of 150 mm thick of size 750 mm dia. Including excavation and refilling the sides of chamber by ?sand crushed cushioning 150 mm thickness, connecting all required UPVC fittings with rubber lubricant etc.complete..Spec.As Directected By Engineer Incharge
266	Providing and fixing 15 mm. Dia Ball Cock Medium Type With PVC Float including sockets & necessary fittings and tested as per municipal requirements etc. complete. Spec. No. As directed by Engineer in charge.
267	Providing and fixing P.V.C. Rain Water Pipes Of 160 mm Outer Diameter And Having Wall Thickness Of 2.2 To 2.7 mm Confirming To I.S. 135921992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment) Spec. No. As directed by Engineer in charge.
268	Providing and fixing in position Unplasticized Polyvinyl Chloride (UPVC) Ultra Voilet Stabilized 110mm Outer diameter Cowl Dome Confirming To IS 4985 including making joint with solvent cement etc. complete. Spec. No. As directed by Engineer in charge.
269	Providing and fixing H.D.P Container Syntex Or Alike One Piece Moulded Water Tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks Capacity Above 1000 To 20,000 Litres
270	Providing and fixing on Walls / Ceiling / Floor 15 mm Dia. CPVC Pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer incharge
271	Providing and fixing on Walls / Ceiling / Floor 20 mm Dia. CPVC Pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer incharge
272	Providing and fixing on Walls / Ceiling / Floor 25 mm Dia. CPVC Pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer incharge
273	Providing Soak Pit Of Size 120 Cm x 120 Cm x 120 Cm including excavation and filling with brick bats. Spec. No. Bd.V.46 Page No.576.
274	Providing and fixing 100 mm dia. chromium plated brass showers rose to 15mm dia. supply pipe including necessary bend and socket complete.
275	Compound Wall + RCC Road& Drain + Rainwater Harvesting :- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removingtheexcavatedmaterialuptoadistanceof50m.beyondthebuildingareaand stackingandspreadingasdirected,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Bd.A.1 Page One Number 259
276	Excavation for Foundation In Hard Murum including removing the excavated materials upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50m) Spec.No. : Bd.A.2, Page No. 259.
277	Providing Soling Using 80 mm Size Trap Metal In 15 Cm. Layer including filling voids withCrushed Sand / grit, ramming, watering complete. Spec.No. : As Directed By Engineer In Charge.
278	Providing and laying in Cast In Situ / Ready Mix Cement Concrete In M-10 Of Trap / Granite / Quartzite / Gneiss Metal For Foundation And Bedding including bailing out water, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With Natural Sand / V.S.I. Quality Artificial Sand. Spec. No. Bd.E.1 Page No. 287
279	Providing and laying in Cast In Situ / Ready Mix Cement Concrete M-25 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Work In Foundations Llike Raft, Strip Foundations, Grillage And Footings of R.C.C. Columns and steel stanchions etc. including bailing out water, formwork, cover blocks,laying / pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. etc. complete, With fully automatic micro processor based PLC with SCADA enabled reversible. Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With Natural Sand / V.S.I. Quality Artificial Sand. Spec. No. Bd.F.3 Page No. 298 and B.7, Page No. 38
280	Providing and casting in Cast In Situ / Ready Mix Cement Concrete M-25 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan Mixer) etc. complete. With Natural Sand / V.S.I. Quality Artificial Sand. Spec. No. Bd.F.5 Page No. 300 And B7, Page No 38.
281	Providing & casting in Cast In Situ / Ready Mix Cement Concrete M-25 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Beams And Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan Mixer) etc. complete. With Natural Sand / V.S.I. Quality Artificial Sand. Spec. No. Bd.F.6 Page No. 300 and B.7, Page No.38
282	Providing and laying Cast In Situ / Ready Mix Cement Concrete M-15 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C.Coping To Plinth Or Parapet Moulded Or Chamfered As Per Drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) Spec. No. Bd.E. 3/Page No. 288/I.S. 456 (2000)
283	Providing and fixing in position TMT FE - 500 Bar Reinforcement Of Various Diameters For R.C.C. Pile Caps, Footings, Foundations, Slabs, Beams Columns, Canopies, Staircase, Newels, Chajjas, Lintels Pardis, Copings, Fins, Arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec. No. Bd.F.17 Page No.306.
284	Providing Fly Ash Brick Masonry With Conventional / I.S. Type Fly Ash Bricks In C.M. 1:6 In Foundation And Plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. Spec. No. As director by engineer in charge and BDG- 2 and 5 Complete.
285	Providing internal / external 20 mm thick Ready Mix plaster confirming to IS:4031(Part-4) 1988andIS383-1970inasingle coatusing Cementmortar ofproportion1:4containing special type of polymer additives about 0.4%, to all type of surfaces in all positions including scaffolding and curing complete As directed by Engineer Incharge
286	Providing and fixing Heavy Duty Inter Locking Concrete Coloured Paving Blocks Of 60 mm Thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. comple. Spec. No. As Directed By Engineer In Charge.
287	Providing and applying Dezzly texture paint of approved make and approved barand exterior emultion paint of approved quality, colour and shade to old and new suface in teo coats, including exterior acrylic primer coat, scaffloding, prepparing the surface etc complete (Heat Reflective Paint).
288	Providing and applying Two Coats Of Synthetic Enamel Paint Of Approved Colour To New / Old Structural Steel Work And Wood Work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. Spec. No. Bd.O.5 Page No. 405.
289	Providing , laying and fixing ,jointing Supreme Eco- Drain 160 mm SN 4 Nu- Drain UPVC Pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees , coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc. complete. Spec. No. As Directed By Engineer In Charge.
290	Providing , constructing and fixing450 mm dia. Inspection chamber made up of Polypropylene/polyethylenematerialHaving315mmdiameterinlet(s)/outletsandwith eccentric reducers as per requirement to connect 160 mm and 200 mm pipes having thickness of5mmand600mminheight,withinbuiltshaftachievetheinvertdepthaspersite condition of wall thickness of 5 mm having R.C.C. cover and frame fixing in 150 mm thick in c.c.1:2:4, having crushed sand bed of 150 mm thick of size 750 mm dia. Including excavation and refilling the sides of chamber by ?sand crushed cushioning 150 mm thickness, connecting all required UPVC fittings with rubber lubricant etc.complete..Spec.As Directected By Engineer Incharge
291	Providing and fixing on Walls / Ceiling / Floor 40 mm Dia. CPVC Pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer incharge
292	Providing and fixing on Walls / Ceiling / Floor 50 mm Dia. CPVC Pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer incharge
293	Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.
294	Providing and laying in Cast In Situ / Ready Mix Cement Concrete In M-10 Of Trap / Granite / Quartzite / Gneiss Metal For Foundation And Bedding including bailing out water, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With Natural Sand / V.S.I. Quality Artificial Sand. Spec. No. Bd.E.1 Page No. 287
295	Providing earth work in embankment with approved materials obtained from departmental land upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from departmental Land)
296	Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader/ Paver on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- By Mix in Place Method andGrading - III Material
297	Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge.
298	Providing and laying in situ / ready mix controlled grade of M20 of trap /granite /quartzite /gneiss metal for RCC works in cut off walls / curtain walls including necessary scaffolding, centering, compacting by vibrator, finishing and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer)with fine agreegates of required specifications ( VSI sand finely washed etc ), excluding reinforcement) As directed by Engineer in charge.
299	Providing and erecting Y Type Barbed Wire Fencing With Seven Rows of wire with 2.45 mm dia G.I. pipe ( Rezan/ concentiDeleted ire 0.75 mm dia ) with hot dip and G.I. coated hooks as per drawing supported on M.S. angle 50 x 50 x 6 mm at 2.5 mtr. c/c including fixing and fastening with wire, painting M.S. angles with one coat of red lead primer and two coat of oil paint etc. complete.
300	Providing and fixing in position TMT FE 500, tie bars precoated with anticorrosive epoxy paint of 12 mm dia. 70 cms.long and at 30.00 cm. C/Cand wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening , supported by assembly of TMT FE 500, chairs with proper alignment etc. complete.MORTH 602.6.4.2
301	Providing and fixing in position TMT FE 500, 25mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 60 cms. Long and at 30.00 cm. C/C and wherever directedincluding handling, straightening, necessarycuttingsupportedbyTMTFE500,chairswithproperalignmentbyusingproperlydesigned assembly of Bulkheads lubricating half length with bituminous paint as directed etc. MORTH 602.6.5complete.
302	Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machinewithdiamondstuddedsawwithin48hoursofcastingofbay/slabetc.completeincluding subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge.MORTH 602.6.3 & 602.6.4
303	Providingtocontractionjointspolysuphidesealent(Pouringgrade)confirmingtoBS:5212-1989into sawedgroovewidenedattopforsealentreservoirofspecifiedsizeandshapeasperdetaileddrawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger thanthe initial 3 mm.to 4 mm. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints withwaterjet/aircompressorandallowing jointto becomethoroughlydrybefore sealentisappliedand applying primer. (A) Contraction and longitudinal joints (15 mm. deep x 8 mm.wide) MORTH 602.6.3 & 602.6.4
304	Providing cast in situ / ready mix M20 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer)with SCADA CD 8 Page 163
305	Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 1200mm diameter in proper line, level and slopeetc. complete. CD.7 Page.No. 162
306	Providing and filling annular space around footing in rock by using concrete of M15 grade etc. complete. M.O.R.T and H - 2100
307	Providing and laying in situ / ready mix M20 CC of trap/ granite/ quartzite/ gneiss metal for wearing course 8cm thick including compacting, finishing, curing and filling in joints with bitumen etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ) BR.47(a) Page Number 140 and B. 7, Page Number38
308	Providing selected hard murum filling including laying in layers of 15 to 20cmwith watering and compacting etc. complete. CD.14 Page.No. 167
309	Drillind for bore well on land 200/150 dia with all types of startaincluding trasportation ete completed
310	providing and fixing 180 mm DiaPVC Casing pipe etc. complete(As Per GSDA Rate 2018-19)
311	Add Cost For Furniture
312	Add For Dismentaling Cost
313	Add For Internal Electrification And External Electrification Works
314	Add For LWC
315	Add For GST

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Maharashtra Tenders

Construction Tenders

Road Construction Tenders

Road Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of New(Type 1-2-3) M O Quarter, Compound Wall , Drain And Road Other Works Phcat. Hayatnagartq .Basmath Dist.Hingoli, Basmath-Maharashtra

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of New(Type 1-2-3) M O Quarter, Compound Wall , Drain And Road Other Works Phcat. Hayatnagartq .Basmath Dist.Hingoli, Basmath-Maharashtra

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us