|
| 1 | SCHEDULE- A1 - Civil Works1. Dismantling and removing theexistingwooden shutters / Loft Shutters / Cupboard Shutters etc area less than 3 sqm including removing if any embedded in the masonry/concrete by cutting the masonry/concrete wherever required without damaging the structure near by , transporting and handing over the materials to the Departmental store/RSO and conveying, stacking the debris at ground level within a lead of 50m for disposal, all asdirected at site of work including all labour, tools equipments,scaffolding, transport, fuel, etc., complete. |
| 2 | 2. Dismantling/cutting the existing Reinforced cement concrete slabs including stacking the steel without disturbing near by structure and conveying and handing over the serviceable materials, if any, to the department stores/RSOincluding collecting and depositing the Debris in Ground level with in a lead of 50m for disposal all as specified and as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete. |
| 3 | 3. Dismantlingand removing the existing brickwork in Cement Mortarto the required size wherever required without damaging the nearby structures including collecting and bringing debris to ground level and depositing the debris within a lead of 50m for disposal all as per relevant specification and all as directed at site of work including all labour, tools, tackles, scaffolding, equipments, plants, transport, fuel etc., complete. |
| 4 | 4.Dismantling and removing the existing damaged cement /tiled /mosaic flooring includingCement Mortar from the floor to the required thick wherever necessary without damaging the nearby structures, including collecting and bringing the debris to the ground level and depositing withina lead of 50m for retransportation and disposal, all as per relevant specification andas directed, including all labour, tools, equipment, transport, fuel, etc., complete. |
| 5 | 5.Preparing the surfaces of walls and plastering in cement mortar 1:5 (1 cement : 5 crushed stone sand), 12mm thickand wherever required to the required finish all as directed at site of work, including cement and other materials, labour, tools, equipments, scaffolding, curing etc., complete. |
| 6 | 6.Providing and laying vitrified floor tiles in sizes of 600mm x 600mm with good quality (thickness to be specified by the manufacturer) or of nearest approved size and colour match with existing with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 crushed stone sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigmentsincluding all materials, labour, brushes, tools, equipment, plants, transport, fuel, etc., complete. |
| 7 | 7. Providing and laying vitrified glazedtiles for wall dadoing / skirting height 150 mm in sizes of 600mm x 600mm with good quality (thickness to be specified by the manufacturer) or of nearest approved size and colour match with existing with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on12mm thick cement mortar 1:3 (1 cement : 3 Crushed stone sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments including all materials, labour, brushes, tools, equipment, plants, transport, fuel, etc., complete. |
| 8 | 8. Providing and fixing one side Pre-polished Granite slab. of all colour black, Cherry/Ruby red or equivalentof 18mm nominal thick,kitchen platform, over Grinder stand and wherever requiredwith CM 1;3 (1cement : 3 crushed stonesand) 20mm thick fixed with cement slurryand joints neatly pointed with cement slurry including nosing to the exposed edges of the granite slab to the required finsih, curing includingall materials, labour, plants, tools, equipment, machinery, fuel etc., complete. |
| 9 | 9. Providing edge moulding to 18 mm thick Granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish nosing to the exposed edges of the granite slab to the required finsih,includingall materials, labour, plants, tools, equipment, machinery, fuel etc., complete. |
| 10 | 10. Supplying and fixing semi modular kitchenarrangements such as Bottom Cabinets, wall box cabinees, Cupboard shutters, loft shutter, Magic corner etc.,made of Prelam Hydrogaurd Plus- High Density Fiber with accessoriesat LHSblocks 14,15 & 16including all materials, labour, tools , accessories, fuel etc., complete as per drawing and as described in Part II -C of sec4.Note: 1. The term \"UNIT\" shall be taken as one individual residentail house.2.Payment will be made for each unit on completion of all works as Specified. |
| 11 | 11. Supplying and fixing semi modular kitchen for bottom cabinets made of Prelam Hydrogaurd Plus- High Density Fiber with accessoriesat HD2A Unit including all materials, labour, tools , accessories, fuel etc., complete as per drawing and as described in Part II -C of sec4.Note: 1. The term \"UNIT\" shall be taken as one individual residentail house.2.Payment will be made for each unit on completion of all works as Specified. |
| 12 | 12.Scrapping , cleaning thoroughly the existing wall surfaces to the required thick wherever necessary without damaging the wall and making suitable for paintingincluding collecting and bringing the debris to the ground level and depositing within a lead of 50m for disposal, all as per relevant specification and as directed at site ,including all labour, tools, equipments, transport, fuel, etc., complete. |
| 13 | 13.Preparing the surface of existing walls/new wallsand applying two coats of premium Acrylic emulsion paint (Asian or equivalent) over one coat of primerof approved colour and shade to give an even shade, finish all as perspecification and as directed at site of work including all materials, labour, scaffolding, brushes, tools, equipments etc., complete.. |
| 14 | 14. Providing and fixing window closure portion made of Prelam Hydrogaurd Plus- High Density Fiber with accessories for fixing Chimneyat LHSblocks 14,15& 16 and HD2A Unit all as directedat site including all materials, labour, tools , accessories, fuel etc., complete . |
| 15 | 15. Preparing theexisting ceiling surface and applying two coats ofpremium Acrylic emulsion paint(Asian or equivalent) of approved brand and colourto give an even shadeall as per specification and as directed at site of work including all labour, materials, tools, tackles, equipments, brushes, scaffolding, etc., complete |
| 16 | 16.Preparing the surfaces of existingwooden members and painting with two coats of synthetic enamel paint (Asian or equivalent) to give an even shade, all as directed at site of work including all materials, labour, scaffoldings, brushes, tools, equipments, etc.,complete.Note: 1. Necessary painting co-efficient shall be allowed as per ChPA engineering manual. 2. The above quantity is inclusive of painting co-efficient. |
| 17 | 17. Providing and fixing first quality stainless steel Kitchen sink with drain board (NERALI OR MOTI MAKE) of size 510x1040mm bowl depth 250mm with all accessoriesin sound working condition including testing etc., all as directed including all labour, materials, tools, etc, complete. |
| 18 | 18.Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 20mm dia pipes (Trubore/Finolex) or equivalent having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge for Concealed work all required accessories like tees, bends,couplings, elbows, reducers, unions, etc., and T.W plugs/clamps, including punching the masonry/concrete wherever required including all labour, materials, tools, equipments, etc., complete. |
| 19 | 19. Providing and fixing CP brass sink cock (Metro or equivalent) fittings in kitchen and wherever required including fixing to water pipe lines, making water tight joint etc., includingtesting the valves and joints etc., all as specified and as directedat site including all materials, labour, tools, equipments, etc., complete. |
| 20 | 20. Providing and fixing 40mm dia PVC flexible hose( Parry ware or equivalent)for sink as available in sound working condition including testing etc., all as directed at site of work including all materials, labour, tools, equipments, etc., complete |
| 21 | 21. Providing and fixing C.P Brass longbody bib cock (Metro or equivalent) including testing etc., all as directed at site including all labour, materials, tools, etc, complete |
| 22 | 22. Providing and fixing CP SS kitchen sink waste coupling ( Parry ware or equivalent)as available in sound working condition including testing etc., all as directed at site of work including all materials, labour, tools, equipments, etc., complete |
| 23 | 23. Loading, transporting and taking away the debris from port premises within a lead of 3 Kms all as per relevant specifications and as directed at site including all labour, transport, tools, equipments, fuel, etc., complete.Note:1. The tenderer shall maintain trip sheets in triplicate in Port\"s approved format at his own cost.2.Payment will be based on the lorry cubical content. No deduction of voids for debris will be made. |
| 24 | SCHEDULE - A2-Electrical Works (Note: The Following Itemwill be executed by M&EE Department of CHPA)1.Supply and Install / Replacing to be mount in the Surface/Recessed switchboard of all materials of 5Amps modular switch including supply of modular switch box with allother accessories to control of fan,light et., as per Schedule A of technical specification. |
| 25 | 2.Supply of Surface/Recessed of all materials and accessories for 16A/15A MODULAR type switch and 15A/5A socket outlet along with base plates, FRAME AND with SUITABLE BOX connections as per Schedule A oftechical specification. |
| 26 | 3.Installation/Replace of Surface/Recessed of all materials and accessories for 16A/15A MODULAR type switch and 15A/5A socket outlet along with base plates, FRAME AND with SUITABLE BOX connections as per Schedule A of oftechical specification. |
| 27 | 4.Supply of Surface/Recessed of all materials and accessories for 2 Nos 5AMODULAR type switch and socketoutlet along with base plates, FRAME AND with SUITABLE BOX connections as per Schedule A oftechical specification. |
| 28 | 5. Install/Replace of Surface/Recessed of all materials and accessories for 2 Nos 5AMODULAR type switch and socketoutlet along with base plates, FRAME AND with SUITABLE BOX connections as per Schedule A of oftechical specification. |
| 29 | 6. Supply of Surface/Recessed switchboard of all materials of 5Amps Modular Switch and Socket outlet to be mounted in the modular type Sub Switch Board itself, including baseplates, FRAME and wiring to the plug as per Schedule A of technical specification. |
| 30 | 7. Installation / Replacing to be mount in theSurface/Recessed switchboard of all materials of 5Amps Modular Switch and Socket outlet to be mounted in the modular type Sub Switch Board itself, including baseplates, FRAME and wiring to the plug as per Schedule A oftechical specification. |
| 31 | 8.Supply of all materials and accessories to carry out the Surface/concealed WIRINGby using suitable size of PVC / conduit/Casing and capping with 3 runs 1.5 Sq.mm PVC insulated unsheathed copper conductor multistrand wires for Phase, Neutral and Earth. From SSB to Individual PT for Fans, Tube lights etc., though connected junction/ inspection boxes along with modular flush type control switch along with base plates and ceiling rose including terminations wherever necessary as per schedule A oftechical specification. |
| 32 | 9. Supply of all materials and accessoriesand to carry out the Surface/concealed conduit wiringby using suitable size of PVC Conduit with 2 runs 4 Sq.mm and one run of 2.5 Sq.mm PVC insulated unsheathed copper conductor wiresetc., though connected junction/ inspection boxes along with terminations wherever necessary as per Schedule A oftechical specification. |
| 33 | 10. Supply of all materials and accessoriesand to carry out the Surface/concealed conduit wiringby using suitable size of PVC Conduit with 2 runs 2.5 Sq.mm and one run of 1.5 Sq.mm PVC insulated unsheathed copper conductor wiresetc., though connected junction/ inspection boxes along with terminations wherever necessary as per Schedule A of techical specification. |
| 34 | 11. Supply of 4 Feet 1x 20w BOX type LED Fittings with T8 LED Tube light with all connections other accessories as per Schedule A oftechical specification. |
| 35 | 12. Installation of 4 Feet Tube LightFittingsas per Schedule A oftechical specification. |
| 36 | 13. Supply of 12” size of Exhaust fan with necessary clamps and accessories for all units as per the technical specification as per Schedule A oftechical specification. |
| 37 | 14. Installation of above Exhaust fan of as per Schedule A oftechical specification. |
| 38 | 15. Supplying and fixing of 3Pin,5A Ceiling rose on the existing junction box/ wooden block including connections etc. |
