Tender For Detailed Design, Supply, Installation, Testing, Commissioning, Operation And Maintenance For 5 Years For The Facade Lighting Work Of Clock Tower Mainpuri Uttar Pradesh - Supply of exterior rated Architectural RGBW Linear LED Wall Washer luminaire, suitable for facade lighting with extruded aluminium housing, powder-coated finish, Clear toughened glass of 4mm thickness and die casted end caps. Total System wattage not exceeding 40W with system lumers output should be more than 1500 lm with all LEDs on. Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol/Ethernet based control. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per the site requirement. Fixture should have Height 125.5 mm ± 5% including surface mount base width 64 mm ±5%, length 1200 mm ±5% with constant locking hinges for simple position control from various angles without special tools. DMX enabler curcuit should be inside the Luminaire only. The rated voltage of the Luminaire should be 230Vac, Luminaire shall be offered with a BIS Approved Potted Driver of IP 66/67 rating made of extruded aluminium to make it more thermal efficient, Led Driver should have Operating input voltage range: 90-305VAC, rF > 0.9 and must have safety operation range form 90V-176Var. Life time of LED driver should be > 80000 hours and MTBF of LED driver should be 2 2,00,000 hrs, Led driver must have SELV output and Case temperature Le Tc > 90 deg * C Fixture shall be suitable to operate at an ambient temperature range of - 30 deg * C to 50°C and complete luminaire shall be IP66 and 1K07 rated. LED Life time shall be at least 170850 & 70000 burning hours at S * O deg * C LED should be with ceramic package of make Nichea, Oszam, Cree, Lumiled only The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports-LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS ie. IS 10322 (Part 5/5 * ec * 5 ) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required with five year Operation and Maintenance 2 Supply of exterior rated Architectural LED RGB flood lighting luminaire, suitable for facade lighting with Die-cast aluminium housing, powder-coated finish, Clear toughened glass of 4mm thickness, Total System wattage not exceeding 40W with system fumen output should be more than 2000 Im with all LEDs on. Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol/Ethernet based control Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per the site requirement. Fixture should have Height 66 mm±1% including surface mount base, Length of 282 mm±1% and Width of 274mm21% with constant locking hinges for simple position control from various angles without special tools Fixture shall be suitable to operate at an ambient temperature range of -20°C to 50°C and complete luminaire shall be IP66 and IK07 rated LED Life time shall be at least 170850 70000 burning hours at 50 deg * C LED should be with ceramic package of make Nichea, Osram, Cree, Lumiled only. DMX enabler circuit should be inside the Luminaire only. Luminaire shall be complete with integrated BIS IP 66/67 potted driver and capable of operating at line voltage from 90-305 Vac, 50Hz with power factor > 0.9 The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports -LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to B15 ie I5 10322 (Part 5/Sec 5) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required with five year Operation and Maintenance 3 SITC of DMX Controller for the system including all other accommories required for the renning of the system Controller should have hopur Power 5-5.5V DC A and Output Protocol DMX512 with #vwse, 2 universe should work in Stand Alone Mode ould work in five mode with bptop/tablet/vomputer The universe should be 241 cres. It should be compatible for Programinability with PC. Mac Tablet, Senartphone by using USB & Ethemet. Dmx controller should have network conerotissitity fexture to control the scene remotely through LAN and triggered via UDP packets on pert 2430 th must have ConType C USB, XURX Ethernet, battery. There should be provision for Meesory microb card Device should have Intuitive backlit keyboard with 10 presets and also have provision of keypad on device for changing scere manually from device. Device should be capable to work on Extended triggering posibilities (TCA) & also have Smart Upgrade Technology (SUT) Its an IP20 unit and has an Operating Temperature of 0°C to 50°C. weight should not be more than 120g, OS Requirements for the controller is Mac OS X 10.8-10.12, Windows 7/8/10 Suretards should be EC, EMC, BORS. The controller should have a variety of features including 2018 DMX chaneels, dock/calendar, iPhone/iPad/Android remote control. Ethernet facilities, dry contact port triggering and multi-rone SD card memory. Network synchronization of one area acros dreds of universes with the possibility of 99 scenes across 5 areas with auto clock triggering for mrise and sunset and as per the festivals for specific occasions. Device should be equipped with meta, clamp to mount on wall. All Dynamic LED lighting fixtures & controllers shall be of same make to avond integration, synchronization, and maintenance issues in future. To be provided with IP 66 enclosure if installed in external environment & shall be provided with all necessary accessories required for proper werking of fixture including weather proof connection cables, water proof connectors etc, as required. with five year Operation and Maintenance 4 supply, installation, ion, testing & commissioning of DMX Signal Amplifier to boost the Signal, IP 65 rated module to enahce the depleting DMX Signals, should have IP 66/67 rates inbuilt connectors compatible with Luminaires. It should be offered with inbuilt electronic ciruit for functioning, with five year Operation and Maintenance 5 Supply of DMX address writer to write automatically address of DMX fixtures, with five year Operation and Maintenanc 6 Supply, installation, testing & commissioning of DMX Splitter with Input Voltage range: 190-240V AC Power Consumption 5W max. Housing is made of CRCA with powder coated finish Mounting, 19 inch rack mountable, Operation Temperature -30°C to +55°C, 8 Output with 3pin XLR terminal sockets, Ingress Protection Rating IP20. This unit takes the DMX Signal from DMX Controller & split the signal into 8 separate output channels. The output terminals of Splitters are optically isolated from the input. Splitters should be capable to amplify the DMX signal & allowing the data link to be extended by max. 300 m (1044 ft.) using AWG 22 DMX cable or 150 m (500 ft.) using AWG 24 DMX cable or maximum 20-25 fixture per output channel. To be provided with IP enclosure if installed in external environment, with five year Operation and Maintenance 7 Plaming. Designing, Programming of all the light fixtures with integration inte controller and making multiple programing in total of 5 different occasion. Synchronizing all fixtures into one. with five year Operation and Maintenance 8 Supply installation commissioning of following sizes of power and data cable as mentioned:3Cx4 sqmm Cu unarmored multistrand with five year Operation and Maintenance 9 4 x 16 sqmm Al armoured 10 Data cable Cat 6 with five year Operation and Maintenance 11 Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring cic. complete in all respect. The armouring of the cable shall be properly connected with the earth. 16 sqmm 12 Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc.16 sqmm 13 Supply and fixing of horizontal air termination (roof conductor) of 25mm x 3mm G.1. strip, surface complete in all respects 14 Supply and burring of Safe Farthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer Gl pipe of 16 swg and inner Gl pipe of 12 vwg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & condoctive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity 15 Supply, installation, testing and commissioning of PVC Pipe of size 20 min as per requirement for cable layingand its protection 16 Supply, installation, testing and commissioning of PVC Pipe of size 40 min as per requirement for cable layingand its protection 17 Supply, installation, testing and commissioning of Oil Cooled Servo Stabilizer of 6 KW Three Phase with Enduwure and connection to the main panel with rating of 180-250 V stabilizong and Feeder Pillar maintaining a fixed voltage output of 220Volt for the entire system, with five year Operation and Maintenance. 18 S/L of with 32 MM GI Pipe ISI as per Site requirement with five year of opearation and Maintainance
