Tender For Renovation Of Toilets At Administrative Building And Qc Lab; 1 Dismantling, chipping, removal of brick/masonry wall, RCC lintel, slabs, floor/ wall tiles, loose concrete etc., using hammer / electrically operated breaker machine in low vibration mode. Details as per Sl No 1 in BOQ 2 Providing masonry work in CM 1:5, using solid concrete block of size 300x200x150mm including raking out joints, finishing to proper lines & levels, curing, etc., complete at all levels.Details as per Sl No 2 in BOQ 3 Providing plastering in CM 1:4 for wall, floor 12mm average thick, using M-sand, one coat floated hard and trowelled smooth & curing etc., complete. Details as per Sl No 3 in BOQ 4 Providing and laying Reinforced Cement Concrete 1:2:4 mix for lintel with a minimum cement content of 320 kg/m3of concrete by using 20-12mm downgraded stones, mechanically vibrated, consolidated, curing, including usage of quality material as approved, cost, conveyance, lead, lift of all materials, labour, required reinforcement, shuttering/formwork etc.Details as per Sl No 4 in BOQ 5 Providing & fixing good quality vitrified tiles, double charged of 600mmx600mm or 600mmx1200mm, 8mm thickness anti- skid, anti-strain & scratch resistant at all levels in floor & wall area of toilets, approved design, shade & finish, laying with tile adhesive after chipping & removing of existing floor& wall tiles from masonry surface etc.Details as per Sl No 5 in BOQ 6 Providing painting in masonry surfaces wall & ceiling with one coat of water based primer, two coats of water based premium grade acrylic emulsion finish paint after thorough surface preparation which includes removing loose old paint layer thoroughly, dirt, grease etc.Details as per Sl No 6 in BOQ 7 Supply & fixing WPC (wood polymer composite) door with door frame of size 100mm x 50mm, door size of width 85mm to 900mm, height of 2000mm height suitable for bathroom use (wet area application), after dismantling of existing wooden doors. Details as per Sl No 7 in BOQ 8 European water closet floor mounted or wall mounted depends upon site suit to S or P trap (make – Jaquar, model no. 755 SS or equivalent of make Kholer / Toto)Details as per Sl No 8 in BOQ 9 Half pedestal washbasin.Details as per Sl No 9 in BOQ 10 Pillar cock.Details as per Sl No 10 in BOQ 11 Bib cock.Details as per Sl No 11 in BOQ 12 Angle cock.Details as per Sl No 12 in BOQ 13 Health faucet.Details as per Sl No 13 in BOQ 14 Shower.Details as per Sl No 14 in BOQ 15 Shower cock.Details as per Sl No 15 in BOQ 16 Mirror – (size -600 mm X 450mm approx..)Details as per Sl No 16 in BOQ 17 Floor trap.Details as per Sl No 17 in BOQ 18 Towel rod.Details as per Sl No 18in BOQ 19 Soap tray.Details as per Sl No 19 in BOQ 20 Supply and fixing of PVC pipe 25mm-50mm dia PVC pipe of15 kg/cm2 pressure rating including bends, tees, brass threaded elbows for fixing angle cocks, bib cocks, any other specials required for the work etc.Details as per Sl No 20 in BOQ 21 Supply and fixing of PVC pipe 60-110mm of 4kg/cm2 pressure rating including bends, tees, elbows any other specials required for the work for fixing closet outlet drains etc.Details as per Sl No 21 in BOQ 22 Supply and fixing of metal blade exhaust fan of 12 inch size, heavy duty with 300mm sweep, 70W & 1380 Rpm, three leaf type with mesh, after core cutting, removing of existingexhaust fan and their accessories. The colour shade shall be got approved before commencement of work.Details as per Sl No 22 in BOQ 23 Supply & fixing powder coated aluminium ventilator using section size of 50mm x 25mm approx, 1.2 mm thickness or nearest, clear glass louvers of 5mm thick at 120mm center to center with sufficient dividers suit to site after removing the existing wooden ventilators from the masonry wall without damaging the structure. Details as per Sl No 23 in BOQ
