|
| 1 | Excavating of hard / dense soil in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying cable. |
| 2 | Material & Labour for sand filling for cushioning on U.G cable. |
| 3 | Materal & Labour for Bricks; common burnt clay building bricks sub class B designation 75, Old size bricks for protection to U.G cable. |
| 4 | Returning, refilling in the excavated trench of hard / dense soil after laying of power cable including spreading levelling, watering and well ramming in layers not exc 25 cm. |
| 5 | Brick work with subclass \"B\" bricks straight / curved on pla,n exc 6m mean radius built in (Cement mortar 1:4). |
| 6 | Rendering 10mm thickness on fair faces of brick work surfaces. (Cement plaster 1:4) |
| 7 | Demolition of un-reinforced cement concrete of any description and in any position. |
| 8 | Material and Labour for Cement concrete 1:2:4 Type B1 using 20mm graded aggregate in foundations, filling and mass concrete. |
| 9 | Supply, laying or fixing with suitable clamps or passing through pipe, PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 120 sqmm, 3.5 core. (Make: GLOSTER/ Nicco/ Polycab/ Kaior suitable equivalent make). |
| 10 | Supply, laying or fixing with suitable clamps or passing through pipe, PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 25 sqmm, 4 core. (Make: GLOSTER/ Nicco/ Polycab/ Kaior suitable equivalent make). |
| 11 | Supply, laying or fixing with suitable clamps or passing through pipe, PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 35 sqmm, 3.5 core. (Make: GLOSTER/ Nicco/ Polycab/ Kaior suitable equivalent make). |
| 12 | Supply & fixing of Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc., as required 32x6mm galvanised iron strip. |
| 13 | Material & Labour for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of by using galvanised iron 32×6mm strip as earth lug lead all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion. |
| 14 | OUT DOOR FPB consisting of 200A MCCB-1 No for incoming, outgoing feeders are 63A MCCB-6 Nos. Specifcation sheet enclosed as annexure -1 (1.0.1 to 1.0.9.5). |
| 15 | Material and Labour for horizontal drilling hole (trench less boring) at a depth of 1.5 mtr below the normal ground level and supply and insert including materials 150 mm bore HDPE pipe across the road, the horizontal position at different locations using special drilling machine as per trade of practise and as directed. |
| 16 | Supply, fixing & connecting of the system cable end termination of size 35 sqmm 3.5 core including with suitable cable gland & lugs. |
| 17 | Supply, fixing & connecting of the system cable end termination of size 25 sqmm 4 core including with suitable cable gland & lugs. |
| 18 | Material & Labour for straight through heat shrink type cable joint, complete with jointing material and accessories suitable for PVC armoured under ground cable of size 35 sqmm 3.5 / 4 core. Make: Raychem/ 3M or suitably equivalent make approved by EIC. |
| 19 | Material & Labour for straight through heat shrink type cable joint, complete with jointing material and accessories suitable for PVC armoured under ground cable of size 25 sqmm 3.5 / 4 core. Make: Raychem/ 3M or suitably equivalent make approved by EIC. |
| 20 | Material & Labour for Cable jointing kit for 1100 Volt (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3/4 core, PVC armoured under cable of size 16 sqmm to 35 sqmm. |
| 21 | Supply, fixing & connecting of the system cable end termination of size 120 sqmm 3.5 core including with double compression suitable cable gland & lugs. |
