Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down eaves gutters and PVC rain water pipes (of any or pattern) including all fittings, heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed. |
| 2 | S & F 110mm bore PVC (SWR) rain water pipes, single sockets, in any length with sealant rubber ring joints fixed to wall , complete all as specified and directed. |
| 3 | S&F 110mm bore, PVC (SWR) bends of any radius, complete all as specified and directed. |
| 4 | S&F 110mm bore PVC (SWR) junction, single, (single T) equal or unequal, complete all as specified and directed. |
| 5 | S & F 75mm bore PVC (SWR) rain water pipes, single sockets, in any length with sealant rubber ring joints fixed to wall , complete all as specified and directed. |
| 6 | S&F 75mm bore, PVC (SWR) bends of any radius, complete all as specified and directed. |
| 7 | S&F 75mm bore PVC (SWR) junction, single, (single T) equal or unequal, complete all as specified and directed. |
| 8 | S&F 75mm bore PVC (SWR) junction, single, (single Y) equal or unequal, complete all as specified and directed. |
| 9 | S&F in repair 15mm bore, stop valve, fancy type, chromium plated, with long shank and cup, concealed type, cast copper alloy screwed down high pressure with crown head, screwed bothends for iron pipe or union, complete all as specified and directed. |
| 10 | S&F in repairs stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with capstan head, screwed both ends for 15mm bore iron pipe or for unions, complete all as specified and directed. |
| 11 | S&F in repair angular stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions, complete all as specified and directed. |
| 12 | S&F in repair 15mm bore bib taps, cast copper alloy, crutch or butterfly handle, chromium plated, fancy type, with capstan head, screwed down, screwed for iron pipe, compelete all as specified and directed. |
| 13 | S&F of 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed. |
| 14 | S&F in repairs chromium plated shower roses with or without swivel joints, any size, including fixing to any type of pipe or union, complete all as specified and directed. |
| 15 | S&F in repair 600mm x 450mm bevelled edge looking mirror of selected quality glass, not less than 5.5mm thick mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws, complete all as specified and directed. |
| 16 | S&Fin repair plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel CP hinges for pedestal pan, complete all as specified and as directed. |
| 17 | S&F in repair vitreous china wash hand basin white flat back of size 630 x 450mm (flat back) including PVC waste pipe 32mm dia, waste coupling including cutting for and pinning in ends of brackets etc including dismantling the existing basin, complete all as specified and directed. |
| 18 | S & F in repair for 32mm dia waste fittings, brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed,complete all as specified and as directed. |
| 19 | S&F in repair 32mm dia waste coupling of PTMT (half or full threaded) (Minimum weight -45 gms), complete all as specified and directed. |
| 20 | S & F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed. |
| 21 | S&F in repair vitreous china squatting pan, \"Orissa pattern\"white, size 580mm x 440mm with integral foot rest,\"P\" or \"S\" trap, including connection to trap, and to flushing pipe, anti -syphonage pipe etc, complete all as specified and directed. |
| 22 | S&F vitreous china urinal bowl white flat back of size 465 x 355 x 265mm including PVC waste pipe 32mm dia, waste coupling including cutting for and pinning in ends of brackets etc, complete all as specified and directed. |
| 23 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm bore pipe, with 1.25 metre long flexible tube and ABS wall hook including makeing connection and fixed in position, complete all as specified and directed. |
| 24 | S&Fin repair 75mm steel grating, fixed with white cement,complete all as specified and as directed. |
| 25 | S & F in repair 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends, complete all as specified and directed. |
| 26 | S&F in repair of 32mm bore and 950mm long PVC corrugated/collapsible waste pipe, one end with socket, complete all as specified and directed. |
| 27 | S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm - 90 gms),complete all as specified and directed. |
| 28 | S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with inlet ball valve, float and handle and connection to flush pipes of polyethylene of low or high density or PVC 32mm dia, complete all as specified and directed. |
| 29 | Fixing only in repairs, flushing cistern and flushing pipe (exclusive of brackets), complete all as specified and directed. |
| 30 | S & F in repair PVC flushing cistern handle including all necessary items, complete all as specified and directed. |
| 31 | S&F in repair sinks made of stainless steel 1mm thick with plugs and wastes including in cement mortar onto dwart wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including waste pipe & coupling 32mm, complete all as specified and directed. |
| 32 | S & F in repair, 20mm bore,ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight - 210 gms), complete all as specified and directed. |
| 33 | S&Frotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of oldunserviceable water tank and removing from site of work, complete all as specified and directed. |
| 34 | S&Frotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of oldunserviceable water tank and removing from site of work, complete all as specified and directed. |
| 35 | Cleaning and removing all scale and dirt etc, fromtanks of capacity exc 500 ltr & n. exc 1000 ltr, and from mouths of circulating pipes etc using edible bleaching powder/liquid and washing with water, writing the item \"Tank Cleaned on dd/mm/yy\" indicating the date, month & year of cleaning on external surface of tank walls with synthetic enamel paint, complete all as specified and directed. |
| 36 | Cleaning and removing all scale and dirt etc, fromtanks of capacity exc 250 ltr & n. exc 500 ltr, and from mouths of circulating pipes etc using edible bleaching powder/liquid and washing with water, writing the item \"Tank Cleaned on dd/mm/yy\" indicating the date, month & year of cleaning on external surface of tank walls with synthetic enamel paint, complete all as specified and directed. |
| 37 | S&F in repair PVC/plastic lid/cover for 500/1000/2000 Ltrs capacity rotational moulded polyethylene water storage tanks,complete all as specified and directed. |
| 38 | Taking down 15mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed. |
| 39 | Re-fixing old steel tubing and connection, 15mm bore, in new or old position with new fittings, complete on wall/ceiling, complete all as specified and directed.(Note : Serviceable steel tube obtained from taking down shall be re-used) |
| 40 | S&F steel water tubing and connection medium grade 15mm bore with all fittings, fixed to wall or in ceiling with or laid in floors, complete all as specified and directed. |
| 41 | Taking down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed. |
| 42 | Re-fixing old steel tubing and connection, 20mm bore, in new or old position with new fittings, complete on wall/ceiling, complete all as specified and directed.(Note : Serviceable steel tube obtained from taking down shall be re-used) |
| 43 | S&F steel water tubing and connection medium grade 20mm bore with all fitting fixed to wall or in ceiling with or laid in floors, complete all as specified and directed. |
| 44 | S&F in repairs 20mm bore gun metal, globe or gate valve, ISI marked, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed. |
| 45 | S&F in repair brass CP tubular towel rail, 20mm dia, D type, 60cm long between flanges, compelete all as specified and directed. |
| 46 | S&F 110mm bore, PVC (SWR) ventcowl, complete all as specified and directed. |
| 47 | S & F in repair CP, brass soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed. |
| 48 | M&L 100mm dia cast iron floor trap / Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1, (1:2:4), compelete all as specified and directed. |
| 49 | Demolition of brick work or stone masonry, built in CM including all quoins, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed. |
| 50 | M & L for brick work with sub class \"B\"bricks, old size, burnt clay bricks, straight or curved on plan exc 6m mean radius built in CM (1:6), complete all as specified and directed. |
| 51 | Taking down cement plaster of any description any thickness incl racking out joints hacking for keys scrubbing down with water etc, complete all as specified and directed. (Note : Necessary scafolding, safety belts, as required at site, shall be provided by the contractor and quoted rate shall deemed to be included the provision) |
| 52 | M & L for rendering 15mm thick in two coats (10mm under layer + 5mm top layer) on fair faces of brick work or concrete surfaces of wall in CM (1:4),mixed with water proofing compound on top layer as per manufacturer\"s instructions and finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately) |
| 53 | Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed. |
| 54 | M&L 10mm thick rendering in CM (1: 6) on fair faces of brick work or concrete surfaces finished surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 55 | M&L for preparing newly plastered surfaces of walls etc and applying two coats of distemper oil emulsion over a coat of chalk whitening primer, complete all as specified and directed. |
| 56 | M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed. |
| 57 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar, complete all as specified and directed |
| 58 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over and including 15mm thick rendering in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling existing one, complete all as specified and directed. |
| 59 | M&L for machine cut kota stone slab flooring and shelves 20-25mm thick laid over cement screed bed of 15mm thick in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. |
| 60 | M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. Note: Kota stone slab to be provided to treads of steps shall be in one piece with rounding off edge on front face. |
| 61 | M&L for rounding to edges of stone slabs kota stone/marble one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed. |
| 62 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backin), removing serviceable tiles to store and rubbish off the premises,complete as specified and directed. |
| 63 | M&L glazed ceramic coloured tiles in vertical surface 350 x 250 x 7mm/450 x 300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM (1:4), complete all as specified and directed. |
| 64 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match the surfaces over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 65 | M&L for vitrified ceramic coloured tiles 8 to 10mm thick (square/rectangular) area of each tile not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match the surfaces over and including 15mm thick screed bed in CM (1:4), complete all as specified and directed. |
| 66 | Demolition of plain cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for drain etc., complete all as specified and directed. |
| 67 | M&L for 75mm thick PCC (1:3:6), type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection, complete all as specified and directed |
| 68 | M&L for 4mm thick pre-painted E-fibre board, designer/decorative,fixed or laid/inserted to GI snap grid frame size 605mm x 605mm work for false ceiling hangers with 4mm to 6mm dia. G.I. (length as required) adjusting level, fixed to roof slabs/truss by means of ceilling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners, 12.5mm dia, 40mm long including necessary dismentaling of existing unserviceable ceiling boards of any thickness including cover fillets, complete all as specified and directed. |
| 69 | S&F pre painted galvalume aluminium zinc coating, GI based corrugated steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws including dismantling of old CGI sheet of any thickness complete all as specified and directed. |
| 70 | S&F pre painted galvalume aluminium zinc coating, GI based plain steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws including dismantling of old PGI sheet of any thickness , complete all as specified and directed. |
| 71 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling our old glazing pins/spring clips, complete all as specified and directed. |
| 72 | M&L for 4mm thick figured glass, pin head type and glazing with oil putty in squares n. exc. 0.5 Sqm in each pane, complete all as specified and directed. |
| 73 | M&L for sheet glass, 4mm thick, ordinary quality and glazing with oil putty in sqaren. exc. 0.5 sqm in each pane, complete all as specified and directed. |
| 74 | S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed. |
| 75 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed. |
| 76 | Takiing down chowkat with shutter n.exc 1.5 Sqm each and removing from site of work, complete all as specified and directed. |
| 77 | S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, complete all as specified and directed. |
| 78 | S&F factory made solid PVC door shutter 30mm thick (stiles), consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed. |
| 79 | S&F 100mm size MS butt hinge, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 80 | S&F 150mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed. |
| 81 | S&F 150mm long extruded aluminium alloy handle, fabricated type, anodised, complete all as specified and directed. |
| 82 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 83 | S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg eachbrackets, conforming to Fe.290.Gde-E-165, complete all as specified and directed |
| 84 | S & F in repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed. |
| 85 | Dismantling fencing wire mesh, of any type including fillets, complete all as specified and directed. |
| 86 | Supply only chain link fencing made out of 4mm dia galvanised iron wire of mesh 75 mm x 75 mm/ 100 mm x 100mm size, made up to into mattress or cages, complete all as specified and directed. (Note : Per meter weight of chain link brought by the contractor shall be finalized through a BOO.) |
| 87 | Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provisition of binding wire etc, complete all as specified and directed. |
| 88 | M&L for preparation of new steel or iron surfaces of any description n. exc. 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer, complete all as specified and directed. |
| 89 | Supply and spreading unslaked lime at sub station/DG set installations/water supply installations area to destroy the roots of grass and herbs, complete all as specified and directed. |
| 90 | Supply and filling dry river sand at surrounding of E/M installations / sub stations /cable trenches including watering and consolidation, complete all as specified and directed. |
| 91 | Supply and filling crushed stone aggregate, free from any foreign particles, 20mm gradded, for spreading at E/M sub station area, complete all as specified and directed. |
| 92 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars, manholes etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100m and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100m, complete all as specified and directed. |
| 93 | M & L for brick work with sub class \"B\"bricks, old size, burnt clay bricks, straight or curved on plan any radius built in CM (1:6), complete all as specified and directed. |
| 94 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) and finished even and smooth without using extra cement, complete all as specified and directed. |
| 95 | M&L for preparation of newly plastered surfaces of wall and applying two coats of white wash, complete all as specified and directed. |
| 96 | M&L for preparation of old painted steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over one coat of red oxide primer, complete all as specified and directed. |
| 97 | Demolition of concrete in ground floors and pavings n. exc. 15cm thickness (below or above ground level), complete all as specified and directed. |
| 98 | M&L for PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate), as in benching, coping etc. including necessary form work, complete all as specified and directed. |
| 99 | M&L for 75mm thick PCC (1:3:6), type C-2 (using 40mm graded stone aggregate) as in sub-bases, path, hardstanding etc, complete as specified and directed. |
| 100 | Supply, installation, testing and commissioning ofout door type LT distribution box made out of2mm thick CRCA sheetout doortype, CPRI approved manufacture totally enclosed weather dust and vermin proof as per ISwith front and rearopening suitablelocking arrangement having copperbus bar 800 Amp capacity for RYB and neutral and insulated with insulators,including connecting incoming and outgoing cables necessary PCC (1:3:6) in foundation and made out of 50 x 50 x 6mm angle iron grouted at groundabove 30cm from ground level comprising the following, complete all as specified and directed:-Incoming :(i) MCCB 250 Amp 4 pole 36 KA with thermal magnetic protection - 01 No.(ii) On load change over 250 Amp 4 pole 36 KA - 01 No.(iii) Digital multi functionMeter 0- 500 Volt - 01 No.(iii) RYB Indicating lamps -03 Nos.(iv) CT\"s 500 /5 Amp - Set of threeOutgoing :(i) MCCB 200 Amp 4 pole 36 KA with thermal magnetic protection - 02 No.(ii) MCCB 63 Amp 4 pole 36 KA with thermal magnetic protection - 02 Nos. |
| 101 | Horizontal boring under the road (with manual method) below 1mtr from the road surface and dia of hole not exc 100mm, without damaging the existing road, getting out and disposal of materials to a distance not exceeding 50m from the site of work, complete all as specified and directed. |
| 102 | S&F GI tubing 80mm bore (light grade) with all fittings for protection of cables, laid in trenches including making good to the distrurbed surface,complete all as specified and directed (Note : Excavation and earth work shall be measured and paid separately) |
| 103 | Supply and installation information display board of size 100cm x 130cm at E/M installations to display the maintenance chart/shock treatment/Do\"s and Dont\"s/fire fighting/first aid/circuit diagram etc, the border of the board made out of 2nd class hard wood bead width n. exc. 25cm of thickness 30mm including varnishing display area of board made of 1st class hard wood 25mm thick hard wood including soft material for pinning of information on board including covered with green velvate cover and complete board should be covered with talcum sheet, transparent type, and charts are pined on the board with spikes, complete all as specified and directed. |
| 104 | S&F in repair danger notice sticker of size 8cm x 8cm, industrial grade vinyl film with UV protected layer, suitable for external use, self adhesive including signage for electric danger with skull and bones 415 volts, complete all as specified and directed. |
| 105 | Taking out 200 KVA unserviceable stabilizer from site by dismantling all electrical connectiion from panel and rearrange for bypass connection temporary basis and carry to the contractors workshop and dismantle the outer and inner fittings part by part carefully and repair/replacement of all under mentioned unserviceable spare parts along with connectivity accessories including overhauling other parts complete and reinstall its previous place with proper connection by thimboling all termination end of cable, complete all as specified and directed. |
| 106 | Taking out burnt out coil from stabilizer of capacity 200 KVA and rewinding the samewith DPC copper wire of existing gauge and weight with insulating materials for LT coil of approved quality, complete all as specified and directed. |
| 107 | S & F control PCB card suitable for 200 KVA stabilizer ,complete all as specified and directed. |
| 108 | M&L for rewiring control circuit partially with single core copper conductor as per existing size for 200 KVA stabilizer, complete all as specified and directed. |
| 109 | Supply and filling up transformer oil (Grade \"B\") in Transformers and oil circuit Breakers installed at various Sub stations, having Di-electric strength not less than 40 KV on 4mm over gap for a period of one minute, complete all as specified and directed. |
| 110 | Dismantling the components from engine assembly of DG set of capacity upto 63 KVA, segregating serviceable and semi/unserviceable parts, decarbonisation, cleaning all interior & exterior parts after disconnectingthe out-going connection of Diesel Engine from the panel board including following services :-(a)Repair/re-conditioning of cylinder head including machine.(b)Repair/re-conditioning of cooling pump with its all assembly, pipes and clamping ring, engine mounted, including machine work.(c) Repair/re-conditioning of exhaust manifold, cleaning, pressure testing for detection of leak, de-sealing leak-proof by necessary welding including machine work.(d) Overhauling and testing of governor assembly including machine work.(e) Dismantling the fuel injection pump / PT pump, segragating serviceable and semi unserviceable parts, replacing all unserviceable parts and cleaning serviceable parts, drying, lubricating, reassembling the FIP/PT pump with cleaned serviceable parts alongwith new parts as per requirment, calibration and testing on completion with computerised testing equipment.(f) Repair of ON/OFF Solenoid switch including repair/replacement of defective/unserviceable spares.(g) Rre-assembling the engine assembly after completion of workminute, complete all as specified and directed.Note - (i) Spare parts/ components shall be measured and paid separately as \"supply only\". (ii) Cost of transportation of defective components (if any) from site of work to workshop and return back to side shall deemed to be included in the unit quoted rate. |
| 111 | Dismantiling and servicingof alternator 3 Phase, 440 Volt, of DG set of capacity upto 63 KVA, from its mounting by unscrewing the nuts & bolts,cleaning the whole assembly of alternator, Replace the commutator, carbon bush & holder and re-assembling all the parts and re-mounted the alternator on its existing including necessary connections, complete all as specified and directed. Note :- Spare parts/ components shall be measured and paid separately as \"supply only\" |
| 112 | Supply only Pistonsuitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 113 | Supply only Cylinder liner suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 114 | Supply only Piston ring set suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 115 | Supply only Piston pin suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 116 | Supply only Piston circlips suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 117 | Supply only O seal ring, first groove suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 118 | Supply only O seal ring, 2nd & 3rd groove suitable for DG engine 40 to 63 , complete all as specified and directed. |
| 119 | Supply only Main bearing upper & lower suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 120 | Supply only Oil seal ring suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 121 | Supply only Radiator cap suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 122 | Supply only Thrust bearing suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 123 | Supply only Inlet/exhaust valvesuitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 124 | Supply only Inlet/exhaust valve seat ring suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 125 | Supply only Valve guide suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 126 | Supply only Valve collet suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 127 | Supply only Valve stem cap suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 128 | Supply only Valve seal suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 129 | Supply only Washer for cylinder head cover suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 130 | Supply only Seal ring (rocker arm) suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 131 | Supply only Water drain cock sub assy suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 132 | Supply only Cylinder head gasket suitable for DG engine 40 to 63 KVA complete all as directed (Make- Kirloskar) |
| 133 | Supply only Gasket cylinder cover suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 134 | Supply only Gasket for water return pipe suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 135 | Supply only Gasket, thermostat outlet suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 136 | Supply only Gasket, thermostat inletsuitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 137 | Supply only Oil filter seat gasket suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 138 | Supply only Oil strainer gasket suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 139 | Supply only Connecting rod bush suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 140 | Supply only Oil sump washer suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 141 | Supply only V-belt suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 142 | Supply only Filter kit (lub oil, fuel,air cleaner) suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 143 | Supply only Air filter element suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 144 | Supply only Copper washer suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 145 | Supply only HCT switch suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 146 | Supply only Radiator water inlet hose suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 147 | Supply only Radiator water outlet hose suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 148 | Supply only Thermostat element suitable for DG engine 40 to 63 KVA , complete all as specified and directed. |
| 149 | Supply only Fly wheel gear ring suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 150 | Supply only Connecting rod suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 151 | Supply only Main bearing suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 152 | Supply only Connecting Rod bolt suitable for DG engine 40 to 63 KVA, complete all as specified and directed. |
| 153 | Dismantling the weak self starter 12 Volt motor of capacity & make as taken out mentioned above, segragating serviceable and semi/unserviceable parts , cleaning serviceable parts , drying, lubricating. Reassembling the self starter motor with cleaned serviceable parts along with the new parts as below and testing, complete all as specified and directed. |
| 154 | Supply only Armature suitable for 24 Volts self starter complete all as directed |
| 155 | Supply only Armature brake spring suitable for 24 Volts self starter, complete all as specified and directed. |
| 156 | Supply only Bush Set (Set of 02 Nos) suitable for 24 Volts self starter, complete all as specified and directed. |
| 157 | Supply only Bush Spring suitable for 24 Volts self starter, complete all as specified and directed. |
| 158 | Supply only Bush holder suitable for 24 Volts self starter complete all as directed |
| 159 | Supply only Bushing commutator end suitable for 24 Volts self starter complete all as directed |
| 160 | Supply only Carbon bush set suitable for 24 Volts self starter complete all as directed |
| 161 | Supply only Drive bushing pinion drive lever suitable for 24 Volts self starter, complete all as specified and directed. |
| 162 | Supply only End cap gasket suitable for 24 Volts self starter, complete all as specified and directed. |
| 163 | Supply only Field coil set (Set of 4 Nos) suitable for 24 Volts self starter, complete all as specified and directed. |
| 164 | Supply only Magnetic switch suitable for 24 Volts self starter, complete all as specified and directed. |
| 165 | Excavation in trenches not exceeding 1.5 metre wide and not exc 1.5 metre in depth for foundation, or cable trenches etc. n. exc. 10 Sqm on plan and getting out in soft/loose soil, complete all as specified and directed. |
| 166 | Removing of excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point in any type of soil, complete all as specified and directed. |
| 167 | Returning filling in including spreading, leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed. |
| 168 | S&F in repair CPVC ball valve of size 50mm dia, suitable for CPVC pipe, complete all as specified and as directed. |
| 169 | S&F in repair CPVC ball valve of size 40mm dia, suitable for CPVC pipe, complete all as specified and as directed. |
| 170 | S&F in repair CPVC ball valve of size 25mm dia, suitable for CPVC pipe, complete all as specified and as directed. |
| 171 | S&F in repair CPVC pipe of size 50mm dia, in trenches, high pressure CPVC pipes SDR-11 & plain CPVC SDR 11 fittings includingall necessay fittings, solvents cement, complete all as specified and as directed. |
| 172 | S&F in repair CPVC pipe of size 40mm dia, in trenches, high pressure CPVC pipes SDR-11 & plain CPVC SDR 11 fittings includingall necessay fittings, solvents cement, complete all as specified and as directed. |
| 173 | S&F in repair CPVC pipe of size 25mm dia, in trenches, high pressure CPVC pipes SDR-11 & plain CPVC SDR 11 fittings includingall necessay fittings, solvents cement, complete all as specified and as directed. |
| 174 | M&L for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under aluminium coat and one aluminium finishing coat of paint, complete all as specified and directed. |
| 175 | S&F 80mm bore cast iron sluice valve in any position, double flanged complete with brass spindle, iron wheel handle clock wise closing with drilled hole, flanged, heavy duty, PN 1.6, including rubber gasket, nuts, bolts, washers including taking down old unserviceable sluice valve, complete all as specified and directed. |
| 176 | All as per item No 175.00 here-in-before but of 100mm bore, complete all as specified and directed. |
| 177 | S&F power pack, industrial type, 180 AH, 12 volt, 25 plate alongwith copper lead and clamp, complete all as specified and as directed. |
| 178 | S&F mild steel column pipe 80mm bore heavy duty having wall thickness 5.4mm (3.0m/1.524m long) both end threaded with one socket conforming to IS-1239 (part-I), 1979 including painting with two coats of black bitumenous paint over a coat of red oxide zinc chrome primer internally and externaly (suitable for drinking purpose) including taking out old unserviceabe column pipe and deposited to AGE E/M store yard, complete all as specified and directed. |
| 179 | M & L for taking up the existing column pipe of 80mm bore cleaining and descaling the column pipe of 80mm bore by wire brush including painting the internal and external surface of column pipe with two coats of black bituminious paint over a coat of red oxide primer (suitable for drinking water) after preperation of old painted surfacesand re-fixing of column pipe without any damages, complete all as specified and directed.Note : Rate included of taking up all column pipe of size 80mm upto pump level / for installation of pump to refix all column pipe after installation of pump complete including connection of column pipe with delivery size 80/100/150mm with necessary fixing. |
| 180 | M&L for flushing bore well at the site with air compressor of capacity 250PSI/1000 Cum and related accessories at least 60 hours till water discharge is free from sand and potable water and to achieve maximum discharge capacity, complete all as specified and directed.Note: Unit rate quoted shall deemed to be inclusive of necessary tools and equipments, as required at site of work, and removing the same after completion of work. |
| 181 | S & F in repair fully automatic star delta starter,in steel sheet enclosure type with single phase preventer suitable for submersible pump motor capacity 20 HP, 415 V, 50 Hz, 3 phase, relay range 20-32 Amps, complete all as specified and directed. |
| 182 | S&F in repair PVC insulated FR, PVC sheathed, stranded, flat submersible copper conductor cable, of size 10 Sqmm 4 core, 1100 volts grade, complete all as specified and directed. |
| 183 | S & F in repair LED aviation obstraction light fixed on overhead tank, heavy duty, with light dependent senser, IP65/IP66 (single light) protected with all electric connection, complete all as specified and directed. |
| 184 | M & L for attending pipeline breakdown of CI pipe of 80mm dia by making lead joint with lead and spun yarn and moulding clay including takin up/down pipe using chain pulley or rope and excavation in any type of soil including returning filling and removal of soil and testing of pipe line, complete all as specified and directed .Note- Earth work/material/fitting/pipe line shall be measured and paid seperately |
| 185 | M &L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6.3cm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized wire of size 4mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part -1, including necessary excavation and earth work, P.C.C (1:3:6) type C-1 with 50mm thick Pre-cast R.C.C. (1:2:4) type B1 cover slab (reinforced with 8mm dia deformed bar 15cm C/C both ways and suitable handle of 10mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15cm compacted thickness all around the earth electrode, with funnel and 20mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, Gl earth wire protected by 15mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion including dismantling of old unserviceable earthing of any descriprtion, complete all as specified and as directed.Note : Proper earthing pit shall be provided with pit cover. |
| 186 | All as per item No 185.00 here-in-before but using galvanised iron strip 32 x 6mm as earth lead, protected by 40mm bore GI pipe, medium grade, complete all as specified and directed. |
| 187 | Supply only calcium based high standard chlorination chemical (Calcium hypo chlorite) for water disinfection in granular form in factorysealed HDPE container complete generic specification as given below :- (a) Chemical name : Calcium hypochlorite(b) Commonname:Stable bleaching powder / high str bleaching powder(c) Toxic & undersireable substance : Should not induced substances beyond acceptable limit as given in IS 10500(2012) in treated and disinfected water. (d) Packing 40-45 kg drums (25 drum @ 45 kg each)Charaterstic specification:- (a) Available chlorine - Min 65 %(b) Particle size (passing through 1+ .70mm IS) % by mass min99.5(c) Water insoluble matter, max 6%(d) Calcium Hydroxide, max 4% (e) Sodium chloride,max 15% |
| 188 | Supply only Chlorine Testing Kit with coloured ample complete with all tesing fitments and OT solutions in rexine finish boxtest of PPM, complete all as specified and directed. |
| 189 | Note: An amount of Rs.44,800.00 on account of Credit Schedule for schedule \"A\" part - II shall be deducted from the total amount of BOQ to arrive at the contract sum. |
| 190 | Supply and fixing energy efficient ‘LED Flood Light120 W LED luminairewith Aluminium dia cast housing, toughened glass cover with IP 66 protection, CCT 5700 K including fixing arrangment on wall/pole / surface and connecting cable up to nearest ceilign rose into flexible PVC conduit. Make : Crompton/Havells/ Surya/Philips |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
