Tender For As And As To P216 And Gymnasium And Sports Arena At Ins Rajali Arakkonam; 1 Demolition of cement concrete of any description and in any position complete all as specified 2 Taking down cement plaster on brick work or Concrete surfaces including raking out joints, hacking for key, scrubbing down with water, etc. 3 M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directedby Engr-in-charge. 4 M & L for Brushing neat cement slurry with 3.0kg of cement per sq. metrecomplete all as specified and as directed by Engr-in-charge. 5 M&L for Providing padding cement concrete in roof kerbs or mud stops, rounded or chamfered on edges cement concrete C-0, 1:3:6 (12.5mm graded aggregate) with water proofing liquid complete all as specified and as directed.(Note: WPC shall be measured and paid separately) 6 M&L for 5 mm thick Screed bed or bedding layer in CM 1:4 with water proofing compound on surface to have a smooth surface for laying floor finishes complete all as specified and as directed by Engr-in-charge. 7 M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in two layers 10mm thick in CM 1:4 followed by 5mm thick CM 1:4 with approved WPC, finished even and fair.( WPC shall be measured and paid separately). 8 Supply only Integral waterproofing compoundcomplete all as specified and as directed by Engr-in-charge. 9 M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minium 3mm thick reinforced with polyester non woven fabric (weight not less than 150 gms/ sqm) laid on primed surfaces with industrial bitumen 85/25, @ 1.20 Kg/Sqm over bitumen primer @ 0.5 litre/Sq.m. by gas flame torch application and cleaning surfaces, applying evenly a tack coat/primer ofindustrial bitumen 85/25 grade at the rate of 1.20kg/sqm over APP membrane complete all as specified and as directed by Engr-in-charge. 10 M & L for 2 coats Aluminium paint over Water Proofing Treatment complete all as specified and directed by Engineer in charge 11 Material and labour for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished fair and even without using extra cement complete all as specified . 12 Material and labour for rendering 5 mm thick in cement mortar 1:3 as in ceilingsurfaces, finished fair and evenwithout using extra cement complete all as specified. 13 M & L for preparation of newly plastered surfaces and applying wall care putty upto 1-2mm thick as required (Multipurpose mixer shall be used for uniform and propper mixing of putty) and applying two coats of emulsion weather coat white/coloured overa coat of exterior water proof primer by auto roller as per site requirement complete all as specified and directed as per manufacturer instruction.Note:1) All work shall be carried out by approved applicator of paint manufacture only. The same shall be approved before carrying out the work from GE.2) Contractor should submit Auth applicator certificate before execution of work.3) Contractor should submit warrenty certificate for 5 years from manufacturer.4) Columns, Beams and Chajja to be painted different colour as per direction of Engr-in-Charge 14 Material and labour forpreparation of newly plastered surfaces and applying two coats of oil bound distemper white or tinted with roller application over a coat of chalk whitening primer over 3mm thick wall care putty complete all as specified and as directed. 15 Material and labourfor prepration of newly plastered surface ofceilingapplying three coats of white wash complete all as specified . 16 M&L for complete removal of existing treatment from old decorated plastered surfaces by Vacuum based sanding machine, removal of nails etc & filling cracks/hole with putty and applying wall care putty upto 1mm thick as required (Multipurpose mixer shall be used for uniform and propper mixing of putty) and applying two coats of emulsion weather coat white/coloured overa coat of exterior water proof primer by auto roller as per site requirement complete all as specified and directed as per manufacturer instruction.Note:1) All work shall be carried out by approved applicator of paint manufacture only. The same shall be approved before carrying out the work from GE.2) Contractor should submit Auth applicator certificate before execution of work.3) Contractor should submit warrenty certificate for 5 years from manufacturer.4) Columns, Beams and Chajja to be painted different colour as per direction of Engr-in-Charge 17 Material and labour for complete removal of existing treatment from old decorated plastered surfaces by Vacuum based sanding machine, removal of nails etc & filling cracks/hole with puttyand applying two coats of oil bound distemper white or tinted with roller application over a coat of chalk whitening primer over 3mm thick wall care putty complete all as specified and as directed. 18 Material and labour for preparation of old decorated surfaces of Ceiling bybrooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent walls and trading oil and greasy spots and applyingfor one coat of white wash complete all as specified and as directed. 19 Taking down chowkats or frames of any description with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm but n exc 4 sqm each all as specified and as directed and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing. 20 Taking shutters of any description exc 1 sqm and n exc 2 sqm all as specified and as directed. 21 S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, hold fast, Butthinges, lock strike plate, including PCC 1:3:6 type C1 (20mm graded aggregates) as in bed blocks for hold fasts including necessary form works, including PCC 1:2:4 type B0 using 12.5 mm graded stone aggregates as in filling of pressed steel door frame etc complete, size of frame 125x60mm incl bottom of each chowkat complete all as specified. 22 S & F 35 mm thick2nd class hardwood partly glazed and skeleton and party panelled shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for windows, ventilators,etc complete, size of member of shutter as spd in SSR Part -I, Sec 8, clause 8.24 (b). 23 Material and labour for 30 mm thick flush shutters, solid core construction, with block board core and covered with decorative face veneer with lipping/frame to match on both faces complete all as specified and as directed by Engr-in-charge. 24 Supply and fix 100mm size stainless steel hinges, medium weight complete all as specified and as directed by Engr-in-charge. 25 Supply and fix 150 mm long stainless steel tower bolts, fixed in screws complete all as specified and as directed by Engr-in-charge. 26 Supply and fix door handle, 125mm size, stainless steel, complete all as specified and as directed by Engr-in-charge. 27 Supply and fix 300mm long stainless steel, sliding door bolt with hasp, stapple (bolt type) and fixing clip of sheet, and fixing bolts and sliding bolts of stainless steel complete all as specified and as directed by Engr-in-charge. 28 S & F of 150 mm size (Overall length of cover plate) floor door stopper of aluminiumbody and tongue, anodised, with hard drawn steel spring complete all as specified and directed. 29 Material and labour for preparation of new steel surfaces over 10 cm girth and applying two coat of synthetic enamel painting over a coat of zinc primer complete all as specified and as directed by Engr-in-charge. 30 M&L Preparing surfaces of new wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer. 31 Material and labour for one coat of synthetic enamel painting on old painted Steel surfaces of any description, not otherwise described over 10cm width or girth including preparation complete all as specified and as directed by Engr-in-charge. 32 Supply and fix Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed. 33 Dismantling PVC water tank of capacity exc 500 and n.exc 1000 ltrs and removing complete all as specified and as directed by Engr-in-charge. 34 S & F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Part I 35 Supply and fix for 25mm dia bore ball valves, high pressure of PTMT, with epoxy coated alu rod highdensity plastic ball complete, screwed for iron pipe or brass ferrule and fixed (Minimum weight 455 gms) complete all as specified and as directed by Engr-in-charge. 36 Disconnecting existing tanks of capacity exc 250 ltrs but n exc 500 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) 37 Disconnecting existing tanks of capacity exc 500 ltrs but n exc 1000 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) 38 Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc, capacity of tanks exc 250 ltrs but not exc 500 ltrs 39 Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc, capacity of tanks exc 500 ltrs but not exc 1000 ltrs 40 S & F in repairs 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) 41 Taking up or down 20mm bore steel water tubing and connections including removal complete all as specified and as directed by Engr-in-charge. 42 Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including clamping to walls complete all as specified. 43 Taking up or down 25mm bore steel water tubing and connections including removal complete all as specified and as directed by Engr-in-charge. 44 Supplying and laying of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including clamping to walls complete all as specified. 45 Supplying and fixing of 25 mm dia CPVC union complete all as specified. 46 Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the permises etc complete all as specified and as directed by Engr-in-charge. 47 Material and labour joint free non skid ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-charge. 48 All as per item No 47 here-in-before but glazed ceramic colour tiles of 7-8mm thick as on skirting/ dado over 10mm thickcement plastering in CM 1:4 complete all as specified and as directed by Engr-in-charge. 49 Supply and fix in repairs Bib tap 15 mm bore, brass, chromium plated, fancy type with crutch or butterflyhandle conforming to IS screwed down, screwedfor iron pipes or for brass ferrule complete all as specified and as directed by Engr-in-charge. 50 Supply and fix in repairs Angular stop cock 15mm bore, brass, chromium plated, fancy type conforming to IS, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed by Engr-in-charge. 51 Supply and fix in repairs Pillar tap 15 mm bore, brass with capstan heads, chromium plated, fancy type, long Neck with aerator conforming to IS, screwed down high pressure with long screwed shanks and fly nuts, screwedfor iron pipes or for brass ferrule etc., complete all as specified and as directed by Engr-in-charge. Make Parryware/Jaquar/Johnson/Kohler/Marc. 52 Supply and fix in repairs 15 mm Brass wall mixer, Chromium plated3 in 1 system with provision of both telephone shower and overhead shower complete with 115 mm long bend pipe and wall flange all as specified and as directed by Engr-in-charge. 53 Supply and fix in repairs 15 mm Over head shower rose with arms, ABS body chromium plated with revolving joint and 125 mm dia round shaped single flow with rubit cleaning system all as specified anddirected by Engr-in-charge. 54 Supply and fix in repairs PVC cabinet mirror with selected quality mirror 4 mm thick, with premoulded plastic frame of trade pattern 25 mm wide with PVC sheet backing for moisture proof and fixed to wall with raw plugs and chromium plated brass screws and cup washers etc., complete all as specified and directed by Engr-in-charge. 55 Supply and fix as in repairs tubular towel rail brass chromium plated, 20mm dia D type, 60cm long between flanges complete all as specified and as directed by Engr-in-charge. 56 Supply and fix in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by Engr-in-charge 57 Supply and fix in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps waste chain and plug and porcelain stopper but including brackets waste fitting brass chromium plated 32mm dia with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed etc complete all as specified and as directed by Engr-in-charge. 58 Supply and fix in repairs vitreous china wash down water closet pedestal pattern white including trap connections to drain and to flush pipe anti-syphonic pipe etc., complete all as specified and as directed by Engr-in-charge. 59 Supply and fix in repairs Soap dish, matt finished, chromium plated (MCH/Colour CP) complete all as specified and as directed by Engr-in-charge. 60 Supply and fix in repairs PVC valveless, syphonic action, flushing cistern low level 10 ltrs capacity, white with inlet ball valve float and handle including brackets and flush pipe of polyethylene of low or high quailty PVC 32mm dia complete all as specified and as directed by Engr-in-charge. 61 Supply and fix in repairs plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed by Engr-in-charge. 62 Supply and fix in repairs flexible PVC waste pipe suitable for wash hand basin and Kitchen Sink all as specified and as directed 63 Supply and fix in repairs PVC connection 15mm size PTMT nuts length 450mm complete all as specified and as directed by Engr-in-charge. 64 Supply and fix in repairs stainless steel grating doom 100mm dia complete all as specified and as directed by Engr-in-charge. 65 Taking up or down 15 mm steel tubing and connections, including cleaning for refixing or removal to store. 66 S&F 20 mm dia UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe with all fittings complete all as specified and as directed by Engr-in-charge. 67 S&F 15 mm dia UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe with all fittings complete all as specified and as directed by Engr-in-charge. 68 Dismantling water tanks and removing exc 1000 to n.exc 2000 ltrs capecity. 69 S & F 2000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Part I 70 S&F in repair 25mm Nipple suitable for HDPE water tank.(Minimum weight 25mm- 65gms) 71 Supply and fix in repair for 25mm dia bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixedcomplete all as specified and as directed by Engr-in-charge. 72 S & F in repair 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 73 Demolition of cement Concrete in floors and pavings n exc 15 cm thickness (below or above ground level) 74 M & L for Cutting out cracks to V section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete al as specified and directed 75 Screed bed or bedding layer of mortar 5 mm thick for laying floor finishes with Water Proofing Compounds in CM 1:3 ( WPC will be measured and paid separately) complete al as specified and directed 76 M & L for removal of old APP membrane and roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3.0kg of cement per sq. metre and applying APP based polymeric membraneweighing 3.5 to 5kg/sqm and minium 3mm thick reinforced with polyester non woven fabric (weight not less than 150 gms/ sqm) laid on primed surfaces with industrial bitumen 85/25, @ 1.20 Kg/Sqm over bitumen primer . by gas flame torch application and cleaning surfaces, applying evenly a tack coat/primer ofindustrial bitumen 85/25 grade at the rate of 1.20kg/sqm over APP membrane complete all as specified and as directed by Engr-in-charge. 77 M & L for plain cement concrete type B2 1:2:4 (using 20 mm graded aggregate) Cement concrete in foundations, filling and mass concrete, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars, posts etc...complete all as specified and directed. 78 Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete al as specified 79 M &L 50mm thick Cement Concrete type C-1, 1:3:6 (20mm graded aggregate) as in floors 80 M &L Providing, cement concretetype C-1, 1:3:6 (20mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges 81 Material and labour for plain cement concrete type D-2, 1:4:8 (Using 40mm graded stone aggregates) as in sub base complete all as specified and as directed by Engr-in-charge. 82 Material and labour for chequred cement concrete tiles 300x300x20-22mm thick set, jointed and pointed in neat cement slurry with grey pigment cement and pigments over 20mm thick screed bed in CM 1:6 with coloured cement to match the shade of tiles complete all as specified and as directed by Engr-in-charge. 83 M&L Integral waterproofing compound 84 Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq.m eachall as specified and as directed by Engr-in-charge. 85 S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing 86 M&L 100m Butt hinges,medium weight, cold rolled mild steel, and fixed 87 M&L 100mm Extruded aluminium alloy handles, fabricated type, anodised 88 M&L 100mm Aluminium anodised, barrel tower bolts of extruded section and fixed 89 M&L 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 90 Supplied and fixed Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, 91 M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with cement mortar 1:4 complete all as specified and as directed by Engr-in-charge. 92 M&L Rendering 10mm thickfor laying wall finishes with cement mortar 1:3 complete all as specified and as directed by Engr-in-charge. 93 M&L for Joint free Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-in-charge. 94 M&L for Glazed ceramic coloured tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed by Engr-in-charge. 95 S & F in repairs vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) 96 S & F in repairs vitreous china urinal partition slabs white of size 310 x 770 mm terminating about 40 cmabove floor line, fixed complete. 97 S&F in repairs of vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to trap and drain (or outgoing pipe) and to flushing pipe, antisyphoage pipe incl Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed by Engr-in-charge. 98 S&F in repairs 15mm bore Bib taps, cast copper alloy CP with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by Engr-in-charge. 99 S&F in repairs15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-charge. 100 S&F in repairs 15mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engr-in-charge. 101 S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets (10 ltrs) including PVC 32 mm dia, for low cistern complete all as specified and as directed by Engr-in-charge. 102 Dismantling and breakingup drain pipes AC /CI /PVC Pipes set in cement mortar 100mm/75mmbore. 103 S&F 110 mm PVC (SWR) pipes single socketed,inanylength with rubber ring joints, laidin trenches or in floors 104 S&F 75 mm PVC (SWR) pipes single socketed,inanylength with rubber ring joints, laidin trenches or in floors 105 S&F 75mm PVC (SWR) bends any radius with access door. 106 S&F 110mm PVC (SWR) bends any radius with access door. 107 S&F 75mm PVC (SWR) vent cowl 108 Material and labour for Complete removal of existing treatment and applying two coat of white wash on walls complete all as specified and as directed by Engr-in-charge. 109 Material and labour for preparation of old decorated wall/ceilingsurfaces by washing rubbing down and stopping of distempered surfaces and filling the nail holes by white cement and applying two coat of oil bound distemper white or tinted with rollercomplete all as specified and as directed by Engr-in-charge. 110 Supply and fix powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and as directed. 111 Supply and fix powder coated anodised sliding/hung type aluminium door, window and ventilator shutters (minimum thickness of powder coating 50 micron), without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2Nos) suitable handle (1 No), aluminium tower bolt 100 mm (1No)etc. complete all as specified and as directed 112 S&F 5.5 mm thickSheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. 113 Supply and fix for powder coated anodised aluminiumgrill of 8x 8mm bars size of opening 10cms size mesh with aluminium channel F angle 20x 15mm aluminium frame workcomplete all as specified and as directed 114 M&L for complete removal of existing treatment from old decorated plastered surfaces by Vacuum based sanding machine, removal of nails etc & filling cracks/hole with putty and applying wall care putty upto 1mm thick as required (Multipurpose mixer shall be used for uniform and propper mixing of putty) and applying two coats of Acrylic emulsion exterior weather coat white/coloured overa coat of exterior water proof primer by auto rollerfor upto G+6 storey bldg as per site requirement complete all as specified and directed as per manufacturer instruction.Note:1) All work shall be carried out by approved applicator of paint manufacture only. The same shall be approved before carrying out the work from GE.2) Contractor should submit Auth applicator certificate before execution of work.3) Contractor should submit warrenty certificate for 5 years from manufacturer.4) Columns, Beams and Chajja to be painted different colour as per direction of Engr-in-Charge 5) Workers should wear appropriate personal protective equipment. 115 Material and labour for light shade vitrified ceramic coloured tiles10mm thick (square/ rectangular) polished area of each tile n.exc 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-charge. 116 All as per item No.115 here-in-before but on vertical surfaces over 10mm thick screed plaster in CM 1:4. 117 M&L for complete removal of existing treatment from old decorated plastered surfaces by Vacuum based sanding machine, removal of nails etc & filling cracks/hole with putty and applying wall care putty upto 1mm thick as required (Multipurpose mixer shall be used for uniform and propper mixing of putty) and applying two coats of oil bound distemper white or tinted overa coat ofprimer with roller application complete all as specified and as directed by Engr-in-charge. 118 Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixtures, PVC conduits and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials from wall/ceiling etc to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc. all as specified and as directed. 119 Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed FRLS multi-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into existingconcealedconduitthrough Wall/Ceiling/Flore along with FRLS 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly and including 2 mm thick terminal boxes MS sheet flush mounted with 3 mm thick laminated hylem sheet fixed with camium plated iron screwsfor mountling switches, socket, fan regulators etc complete for for the following point wiring and making good disturbed surfaces matching with existing paint complete all as specified and as directed.Make of PVC copper conductor cable:- Finlex/Poly cab/ Havells. 120 One light/fan point controlled by one switch with cable 1.5 Sqmm size.. 121 One bell/buzzer point controlled by one push button with other switches on indipendent board with cable 1.5 Sqmm size. 122 All as per item ser no-121 above here in before but one 3 pin socket outlet 5 Amps, same boardwith cables 1.5 Sqmm size. 123 All as per item ser no-121 above here in before but one 3 pin socket outlet 5 Amps, independentboardwith cables 2.5 Sqmm size. 124 All as per item ser no-121 above here in before but one 5 pin socket outlet 5/15 Amps, indipendentboard/AC/Geyserwith cables 4 Sqmm size. 125 Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copperconductor drawn into including PVC conduit of minimum 20 mm dia concealed/surface wiringthrough Wall/Ceiling/Flore etcincluding provision of 1.5Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following 126 One light/fan point controlled by one switch. 127 All as per item ser no-125 above here in before but one 3 pin socket outlet 6 Amps, Independent boardwith cables 2.5 Sqmm size. 128 Supply and fixing Modular switch one way 5/6 A white Active one module all as specified and as directed by the Engineer-in-Charge. Make: Havells(Crabtree)/Legrand/Plaza. 129 Supply and fixing Modular switch Bell push,, 5 A white Active one module all as specified and as directed by the Engineer-in-Charge. Make: Havells(Crabtree)/Legrand/Plaza. 130 Supply and fixing Modular socket 5 Amp, 2/3 pin Active white two module complete all as specified and as directed by the Engineer-in-Charge.Make: Havells(Crabtree)/Legrand/Plaza. 131 Supply and fixing Modular switch one way 16 A white Active one module all as specified and as directed by the Engineer-in-Charge. Make: Havells(Crabtree)/Legrand/Plaza. 132 Supply and fixing Modular socket 16 A, 5 pin multi purpose Active white two module complete all as specified and as directed by the Engineer-in-Charge .Make: Havells(Crabtree)/Legrand/Plaza. 133 S&F Ceiling rose three terminals/ PVC/ polycarbonate, isolated bodycomplete all as specified and as directed by Engr-in-Charge Make: Anchor/ABB/Leader 134 Supply and fixing in repair of GImetal flush box suitable for mounting moduler plate including removing old rusted metal box from site as per requirement of following modules:- 135 GImetal flush box, 2 Module 136 GImetal flush box, 3 Module 137 GImetal flush box, 4 Module 138 GImetal flush box, 6 Module 139 GImetal flush box, 8 Module 140 GImetal flush box, 12 Module 141 Supply and fixingin repair of combined both frame and cover plates fixing on mounting boxes for following modules:- 142 Cover plate with frame,1 Module 143 Cover plate with frame,2 Module 144 Cover plate with frame,3 Module 145 Cover plate with frame,4 Module 146 Cover plate with frame,6 Module 147 Cover plate with frame,8 Module 148 Cover plate with frame,12 Module 149 Supply and fix high efficiency wall mounted LED light fitting 4 feet white, 20W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old one and taken as credit complete all as specified and as directed.(Make:- Philps Cat Part No. BN021C LED20S PSU CDL GR or or Equivalent in Panasonic, C&S, Havells) 150 Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. 151 Supply and Fixing and Testing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 66 protection with Surge Suppressor 5 KV complete and making good disturbed surfaces including taking down old u/s post top lanten all as specified and directed. Make : Surya / Philips/ Bajaj /Crompton. 152 Supply and fix for Buzzer, Ding Dong AC, 230 volts, single pole. Make: Anchor, GM, 153 Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including making hole/cutting wall/fixing complete all as specified and as directed. 154 Supply and fixing in repair ofmodular fan step regulator,120 W-2 module all as specified and as directed by the Engineer-in-Charge.Make: Havells(Crabtree)/Legrand/Plaza. 155 Taking down ceiling fans of any make and sweep from ceiling hook/existing position complete including disconnectingand transporting to workshop for repairs all as specified and as directed. 156 Hanging only ceiling fans any make and sweep after repairs to ceiling hook by connecting with 3 core copper flexible round cable from ceiling rose to fan complete incl shifting from workshop all as specified and as directed. 157 Supply and replacement ofMetal clad socket single pole and neutral enclosure with a two pin + earth plug top and socket complete with one doble pole 20-32 Amps MCB C Type 230 Volts all as directed. 158 Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc 159 Supply and fix for MCB SP 230 V, 6-32 Amps with breaking capacity 10KA C curve complete all as specified and as directed by Engr-in-chargeMake: Siemens/Scheneider/ABBNote : Including taking down old unserviceable. 160 Supply and fix for MCB TPN 230 V, 40-100 Amps with breaking capacity 10KA C curve complete all as specified and as directed by Engr-in-chargeMake: Siemens/Scheneider/ABBNote : Including taking down old unserviceable. 161 Supply and fix for MCCB 4 Pole, 415 V,adjustable Thermal &Fixed Magnetic setting typetype 150 Amps with breaking capacity 36 KA complete all as specified and as directed by Engr-in-charge.Make: Siemens/Scheneider/ABB, Note : Including taking down old unserviceable. 162 S&F sheet metal enclosure TPN MCB DB 4 way double door with spreader terminals,insulating phase barrier and hardware with neccesary arrangements all as specified and directed Note :-(i) Including taking down old u/s DB, MCBs (ii) MCBs shall be measured and paid separately under the respective item of shedule. Make : Legrand/ Siemens/Scheneider/ABB/ Havells. 163 M&L for cutting chases on brick walls concrete surfaces not exc10cm girth and making good in cement mortar (1:3) the existing surfaceafter carryiing out the concealed wiring including necessary finishesall as directedby Engr in charge. 164 Material and labour for Sub main wiring with Four run single core 10 sqmm for phase and neutral and two run single core 10 sqmm as earth wire with multi stranded copper conductorPVC insulated unsheathed FRLS cable 1100 volts grade confirming to IS-694 continuity conductor drawn into existingconcealedconduitthrough Wall/Ceiling/Flore including taking down old sub main wiring and taken as credit complete all as specified and as directed.Notes: (i) The disturbed surfaces shall be made good with existing surface including finishes as applicale. (i) Four different color wires shall be used for phase and neutral . (iii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles .Make of cable:- Finlex/Poly cab/ Asian. Make of PVC conduit : Avon plast/ Kon seal / Garware. 165 Supply and fixing in repair ofModular step type fan regulator,120 W white Active two module all as specified and as directed by the Engineer-in-Charge.Make: Havells(Crabtree)/Legrand/Plaza. 166 Supply and fixing Modular socket 5 Amp, 2/3 pin Active white two module complete all as specified and as directed by the Engineer-in-Charge.Make: Havells(Crabtree)/Legrand/Plaza. 167 Supply and fixing Modular switch one way 16 A white Active one module all as specified and as directed by the Engineer-in-Charge. Make: Havells(Crabtree)/Legrand/Plaza. 168 Supply and fixing Modular socket 16 A, 5 pin multi purpose Active white two module complete all as specified and as directed by the Engineer-in-Charge .Make: Havells(Crabtree)/Legrand/Plaza. 169 Taking down existing rusted switch board sunken box from site including removing fixtures and fittings such as switch, socket fan regulator complete, removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces necessary plaster, white wash matches with existing colour of wall, floors, etc. all as specified and as directed. 170 Supply and high performance low wattage Street light not less than 25 Watts LED light fitting ,IP66 protection powder coated pressure die cast aluminium high power street light with heatresisant toughened glass with lens by providingGI pipe medium grade 25 mm dia 1.5 Mtrin length with suitable size MS Clamp two nos made out of 25x3 mm FI incl two coat of synthetic enamel paint over a coat of red oxide primer, prewired and including connecting up with 3 core flexible copper conductor cable of 1.5 Sqmm from ceiling rose to fitting and including taking down old u/s damagedall as specified. (Make : philips,Cat Part No BRP042 LED 25 CW SLE S1 PSU GR P4210 or equivalent model of Panasonic/Havells). 171 M & L for rewinding of burnt out exhaust fan 300-380 mm sweep motor with super enameled copper winding wire of suitable gauge/size including necessary tapping, varnishing etc, including taking down burnt copper winding and necessary transportation to workshop and back and fixing and testing all as directed. 172 Material and labour for Sub main wiring with Two run single core 2.5 sqmm for phase and neutral and one run single core 2.5 sqmm as earth wire with multi stranded copper conductorPVC insulated unsheathed FRLS cable 1100 volts grade confirming to IS-694 continuity conductor drawn into existing concealed conduit or non-metallic rigid PVC conduit of minimum 20 mm dia as per site requirement wiring through wall/cable tray/ceiling/floor/roof etc including conduit accessories including taking down old sub main wiring with PVC conduit and taken as credit complete all as specified and as directed. Notes: (i) The disturbed surfaces shall be made good with existing surface including finishes as applicale. (i) Two different color wires shall be used for phase and neutral . (iii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles .(iv) Three run of 2.5 Sqmm cable, and one run of PVC conduit will be measured as one unit.Make of cable:- Finlex/Poly cab/ Havells.Make of PVC conduit : Avon plast/ Kon seal / Garware/ Finolex. 173 All as per item ser no-157 above here in before but two run single core 4 sqmm for phase and neutral and one run single core 4 sqmm as earth wire (ie 3X4 Sq mm) 174 All as per item ser no-157 above here in before but two run single core 10 sqmm for phase and neutral and one run single core 10 sqmm as earth wire (ie 3X10 Sq mm) 175 Supply and fixing LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp all as specified and as directed. 176 Supply and fix for MCB SPN 230 V, 40-63 Amps with breaking capacity 10KA C curve complete all as specified and as directed by Engr-in-charge.Make: Siemens/Scheneider/ABB/HavellsNote : Including taking down old unserviceable. 177 S&F DB for MCB SPN 12 waydouble door DB with 200 amps rated copper bus barin SS enclosure double door type having IP 43 and IK 09 protection Including taking down old u/s DB and MCBs all as specified and directed . Note : MCB SPN/SP shall be measured and paid under the respective item of the schedule. Make: Legrand/Siemens/Scheneider/ABB. 178 Supply Fabricate, install, connect andtestindoor type distribution board of 2mm thick CRCA sheet powder coated painting fabrication and concealed in wall with all incomming outgoing cable connections provisions neutral and earth links for distribution with suitable insulation materials for fixing, suitable wiring from existing DB covered and as well as comprising followingswitch gear items mounted on suitable fibre sheet for for protectcting and fixing DB SPN 12 way with locking arrangement complete including taking down old metal box and taken in to credit all as specified and as directed. 179 Supply,Fixing and Testing warm LED highbay light fitting of 120 Watt, Luminaire fittingof IP 66 protection comprises of Pressure die cast Aluminium housing powder coated, toughened glass,LEDs provided with secondary lens optics,luminaire efficacy not less than 140 lm/w provided with SPD 10 KV included complete all as specified and directed.Make - Crompton Cat No. CIP-327-120-57-60D-HL5-LM-NSG or equivalent model in Philips/Wipro/Surya 180 Hiring boom lift/crane suitable for minimum 10-15 mtr height for servicing, checking for repair / replacement of highbay lighting and other allied items installed at Hangers , including necessary operator,fuel,T&P, safety equipments/tools complete required for safe operation complete all as specified and directed. Note: Each day is minimum of 8 Hrs ofworking (2)Submain wiring minimum 300RMis considered in one Job.
