Tender For Certain Repairs To Boundary Wall, Chain Link Fencing/Barbed Wire Fencing Including Repairs To Footpath And Misc Works At Various Locs Under Age Br-I New Cantt Prayagraj; 1 Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and directed. 2 Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, Arches etc and removal of debrishes from site complete all as specified and directed. 3 M&L for brick work with sub class ‘B’ bricksstraight or curved on plan exceeding 6m mean radious, built in cement mortar (1:6) complete all as specified and directed. 4 Description same all as per item No. 3 here in above but except bricks (Bricks shall be obtained from demolition rates for segregation of old bricks, stacking, cleaning etc shall be included in this item complete all as specified and directed. 5 M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 M mean radius built in CM (1:4) complete all as specified and directed 6 Description same all as per Item No 05here-in- above but except bricks (using old serviceable bricks) complete all as specified and directed. 7 M&L for brick work with sub class ‘B’ bricksstraight or curved on plan to any mean radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed. 8 Taking down cement plaster of any description including racking out joints, hacking for key, scrubbingdown with water etc and prepare to receive new plaster complete all as specified and directed. 9 M&L for 15 mm thick rendering in CM (1:4)on external surface fair/other than fair faces of brick wall finished even and smooth etc complete all as specified and directed. 10 M&L for preparing new plastered wall surfaces and applying two coats of cement base paint on wall surfaces over one coat of primer complete all as specified and directed. 11 M&L for preparing, plastered or unplastered of old plastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed. 12 M&L for Keyed pointing in cement mortar (1:4) to brick wall of drains complete all as specified and directed. 13 De-silting and cleaning of existing rain water drain and removing the earth / sand / silt and shrub and other materials etc complete to a distance exc. 250 m but n. exc 500 mtr and depositing where directed at a level n. exc. 1.5 m above the starting paint complete all as specified and directed. 14 Grubbing up tree trunk/shrubs etc girth n exc 30cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground and removing of unserviceable material to a distance n exc. 50 m and clearing site complete all as specified and directed. 15 M&L for PCC (1:4:8) type D-2(using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete, complete all as specified and directed. 16 M&L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in surface channel and drain finished surface even & fair complete all as specified and directed. 17 M&L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete with using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed. (inner girth only measured) 18 Add or deduct from item No. 17 for each 25mm girth or part thereof over or under 30cm inner girth (inner girth only measured) complete all as specified and directed. 19 Demolition ofreinforced cement concrete of any description and in any position as in ground foors complete all as specified and directed by Engr-in-Charge 20 M&L for Reinforcement cement concrete pre-cast reinforcement cover slab (1:2:4) type B-1 using( 20 mm graded crushed stone aggregate) as in manhole cover of any size including RCC ring/Frame and MS frame set in CM(1:4) etc complete all as specified and directed. 21 M&L for TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. 22 Use and waste foe form work (flat) to soffits of suspended slab such as floor slabs ,landing mancover slab stc complete n exc 200mm thick in flat surface complete all as specified and directed. 23 DismantlingStone slabs and tiles of any description or thickness in floors aprons etc laid dry or laid dry and pointed complete all as specified and directed. 24 M&L for 75 mm thick type D-2 1:4:8 (using 20mm graded stone agg) as in sub base. complete all as specified and directed. 25 M&L for machine pressed precast concrete interlocking paver block of grey cement rubber moulded glossy finish and no pigment, any shape and size confirming to IS-15658-2006 of 80mm thickness, M-40 grade laid over and including 30mm thick sand cushion complete all as specified and directed. 26 M&L for (Except Tiles) for machine pressed precast concrete interlocking paver block of grey cement rubber moulded glossy finish and no pigment, any shape and size confirming to IS-15658-2006 of 80mm thickness, M-40 grade laid over and including 30mm thick sand cushion complete all as specified and directed. 27 M&L for machine pressed precast concrete interlocking paver block of grey cement rubber moulded glossy finish and no pigment, any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 grade laid over and including 30mm thick sand cushion complete all as specified and directed. 28 M&L (Except tiles) for machine pressed precast concrete interlocking paver block of grey cement rubber moulded glossy finish and no pigment, any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 grade laid over and including 30mm thick sand cushion complete all as specified and directed. 29 M&L for Rubber moulded chequered cement concrete tile25 mm thick with grey cement and pigment set jointed and pointed in neat cement siurry over screed bed or bedding layer 15 mm thick in CM (1:6) in floor complete all as specified and directed. 30 M&L for vitrified pavement outdoor tiles of 300mm X 300mm X 9-10mm thick coloured for floor /pavement etc and jointed in solvent and pointed in coloured cement to match the tiles including 15mm thick screed bed or bedding layer ie. cement mortar (1:6) complete all as specified and as directed. 31 M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. 32 M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in beching and coping, leveling course bed block and other similar bands, plinth courses, string courses, lacing courses, opings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. 33 M&L for preparation of new concrete/brick/stone or plastered surface of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer etc complete all as specified and directed. 34 Dismantling of mild steel or structural steel work including doors, gates, but excluding framed truss and dismantling of CI work and removing complete all as specified and directed. 35 S&F for mild steel framed work such as grills, gratings etc with ends of bars shoulders or reveted, forged into spikes, framed guard bars, railings, ladders and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed. 36 Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed. 37 S&F for mild steel workas in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. 38 Description same all as per item No 35 here in above but fixing only complete all as specified and directed. 39 M&L for two coats of synthetic enamel paint on new steel surfaces of any description over and including a coat of red oxide primer including preparation of steel surface complete all as specified and directed. 40 M&L for preparation of old steel surfacses of any description and applying one coats of synthetic enamel paint etc complete all as specified and directed. 41 S&F in repair for galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining fixing to any type of strandard rail straining bolts,including securing or tyingat crossing with provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed. Note:- (each line wire to be measured) 42 S&F in repair concertina coil 600mm dia (in stretched position) hot dip galvanized steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dovetail clips (18 SWG) fixed over and including razaor wire, medium barb, hot dip galvanized steel wirerazor wire with angle iron. The concertina coil to be fixed with razor wire at points wherever coil touches bottom of razor wire with the help of hog rings (14 SWG) including all fittings like fastener clips,steel lug rings etc complete all as specified and directed. Note - (i) Stretch length of each coil shall be 6 mtr complete all as specified and directed. (ii) Angle iron shall be measured paid separately underrespective item of schedule of works. 43 S&F in repair chain link mild steel galvanized fencing of mesh size 50mmx50mm and not less than 3mm dia hot dipped GI wire fixed and binding with GI wire complete all as specified and directed. 44 Excavation in soft/loose soil for getting out puncturing or existing damaged/broken or otherwise nonfunctional salt glazed stone ware pipe 100mm dia bore (length of pipe 60cm) and supply and fixing salt glazed stone ware pipe of 100mm dia bore grade A ISI Marked incl PCC 1:3:6, Type C-2 using 40mm graded crushed stone aggregate bed and haunching as required incl jointing with existing line, returning, filling in and well ramming the soil and removal of surplus spoil to a distance n. exc 50 mtr and deposited where directed etc complete all as specified and directed. 45 Description same all as per item No 45 here-in above but bore of pipe 150mm complete all as specified and directed. 46 Description same all as per item No 45 here-in above but bore of pipe 300mm complete all as specified and directed. 47 Taking down PVCpipe of any size or pattern including all fitting head, shoe, band, swan neck etc complete all as specified and directed by Engineer-in-Charge. 48 S&F for PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 110mm bore complete all as specified & directed. 49 S&F for PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, laid in trenchs or floor 110mm bore complete all as specified & directed. 50 S&F for PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 75 mm bore complete all as specified & directed. 51 S&F for PVC (SWR) bends any radius, 110mm bore completeall as specified & directed. 52 S&F for PVC (SWR) bends any radius, 75 mm bore completeall as specified & directed. 53 S&F for PVC (SWR) Junnction single (T) equal or unequal 110mm dia complete all as specified and directed. 54 S&F in repair PVC (SWR) floortrap plain with grating in cluding jointing with solvent cement 75/100mm dia complete all as specified and directed 55 S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. 56 S&F for PVCstack clamps out of suitable for 110 mm bore dia SWR pipe including bolts and nuts and securing ends of stays to wall or roofs complete all as specified and directed. 57 S&F for PVCstack clamps out of suitable for 75mm bore dia SWR pipe including bolts and nuts and securing ends of stays to wall or roofs complete all as specified and directed. 58 Excavation in trenches n.exc 1.50 mtr wide and n. exc 1.50 mtr depthfor foundation etc or for shafts, wells, cesspits , manholes , pier holes etc n.exc 10 Sqm on plan & n. exc 1.5 m in depth andgetting out in soft/loose soil complete all as specified and directed. 59 Removal of excavated material (soil)to a distance n. exc 50 mtr and depositing where directed at a level n. exc 1.50 mtr above the starting point complete all as specified and directed 60 Returning filling in including spreading, leveling, watering and well ramming in layers n. exc 25 cm thick in soft/loose soil complete all as specified and directed. 61 M&L for 100 mmbore salt glazed stonewaredrain pipe grade ‘A’ conforming to IS 651-1972 laid in trenches and jointed in CM 1:1 complete all as specified and directed. 62 M&L for 150 mmbore salt glazed stonewaredrain pipe grade ‘A’ conforming to IS 651-1972 laid in trenches and jointed in CM 1:1 complete all as specified and directed. 63 M&Lfor cement concrete aggregatebed to drain pipe 100 mm dia including packing under and haunching againstthe sides of pipe after they are laid and testedin cement concrete 1:4:8 type D 2 using 40mm graded stone aggregate complete all as specified and directed. 64 M&L for cement concrete aggregatebed to drain pipe 150 mm dia including packing under and haunching againstthe sides of pipe after they are laid and testedin cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate complete all as specified and directed. 65 Cutting into existing man holes for connecting new drains making good to pipes and rendering cutting out existing benching for and forming branch channel (1/2 round or ¾ in section) in cement concrete 1:2:4 type B-1(using 20 mm graded stone aggregate) surface smooth finished and reforming benching as required for internaldia of pipe 100mm complete all as specified and directed. 66 Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed. 67 S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 68 S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 69 Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified & directed. 70 M&L for structural steel work with rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-290 (Gde E-165) quality A complete all as specified and directed. 71 S&F in repair rotational moulded polythene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed top), triple layer construction, ISI marked, hoisted & fixed in position including disconnecting and refixing the existing GI fitting and pipegate valves gun metal with iron wheel head screwed both ends for iron pipes and fixed 25mm,float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 25mm bore minimum weight 210 gms complete all as directed. 72 S&F in repairs to triple layer black/white colour rotational moulded vertical water storage tanks with closed tops ( cylinderical ) hoisted and fixed in position 500 ltr capacity incl disconnecting and refixing the existing GI fitting and pipegate valves gun metal with iron wheel head screwed bot h ends for iron pipes and fixed 25mm,float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 25mm bore minimum weight 210 gms complete all as directed. 73 S&F in repair ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms complete all as specified and as directed. 74 S&F in repair Stop valves/Gate valves 25 mm dia cast copper alloy,screwed down, high pressure with crutch or butterfly handel, screwed both ends for iron pipe or for unions and fixed.complete all as specified and directed. 75 Taking up or down steel tubing 15mm dia bore and connections including cleaning for refixing or removal to store complete all as specified and directed. 76 Taking up or down steel tubing 20mm dia bore and connections including cleaning for refixing or removal to store complete all as specified and directed. 77 Refixing old15 mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid infloorscomplete all as specified and directed. 78 Refixing old20 mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid infloorscomplete all as specified and directed. 79 S&F for 15 mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid infloorsincluding cutting chaising,if required complete all as specified and directed. 80 S&F for 20 mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid infloorsincluding cutting chaising complete all as specified and directed. 81 S&F for oil and Grease trap of size 900 x 900 x 900 mm, body material Stainless Steel Gde-304, thickness 1.8 mm, basket size 325 x 325 mm & trap size 75 mm ,inlet and outlet size 75mmalongwith its connection accessories and making good etc including excavation in soft soil of required size and depth upto 1mtr and P.CC of 75mm thickin 1:4:8 ratio with 40mm aggregate and brick wall of 0.115 mm thick surrounding the grease trap and making connection to nearesr manhole thogh 110mm/75mm PVC (SWR) pipe complete all as specified and directed.Note : P.C.C ,Brick work and PVC(SWR) pipe paid sepratvely in respective items 82 Supply and fixing in repair vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe)and P or S trap including connection to drain (or outgoing pipe) and to flushing pipe anti-syphonage pipe etc complete all as specified and directed . including plastic water closet seat cover closed pattern with flat bottom and cover and mild steelchromiunm plated or aluminum hinging device 83 S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified and directed. 84 Supply & fixing in repair vitreous china one piece EWC (pedestal pattern)Snow white/Star white/ white type with S concealed trap, front of back inlet including all fitting e.g soft seat cover, lid, twin flush fitting, health faucet, CP brass angular cock with wall flange, CP brass toilet paper holder etc complete all as specified in particular specifications.Make :- (i) Hindware model Constellation premiu for EWC & Cistern with lid model no 21038 or CERA- model Calvina -orequivalent model of make specified in Appendix B to particular specifications. 85 S&F in Repair for vitreous china wash and basin thin rim table top basin of size 415x415x145mm shape round complete all as specified and directed. 86 S&F in Repair for bottle trap (with internal partition ) 32mm size with 300 mm & 190 mm long wall connection pipes & wall flanges complete all as specified and directed 87 S&F in repairs PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including dual flushball valve float & handle, waste pipe & brackets complete set complete all as specified and directed. 88 S&F in repairVitreous China wash basin, flat back, size 450x300mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed. 89 S&F in repair Waste coupling of PTMT (half or full threaded) (Minimum weight2mm45gms/40mm 60 gms waste pipe of 40mm dia suitable for WHB, kitchen sink complete all as specifed and directed 90 S&F in repair angle cock fancy type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed. 91 S&F in repairs bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed. 92 S&F in repair wash basin mixter fancy typecast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot or `Cold with long screwed shanks and fly-nuts, screwed for 15mm dia iron pipe and fixed complete all as specified and directed. 93 S&F forWall mixer with provision for overhead shower with 115 mm bend pipe on upper side,connecting legs and wall flanges complete all as specified and directed. 94 S&F in repairPVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed. 95 S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and directed . 96 S&F in repair waste pipe 32mm dia 800 mm long for wash basin complete all as specified and directed.Make- Prayag Cat No-237 or equivelent as per approved make list. 97 S&F for corner glass self (with bracket) complete all as specified and directed 98 S&F in repair CP vitreous china soap dish fancy type complete all as specifed and directed. 99 S&F for 900 mmx450 mm bevelled edge mirror of selected quality glass, mounted on 4 mm thick ACP boardand fixed to wooden plugs with CPbrass screws and cup washers complete all as specified and directed. 100 S&F in repairBrass chromium plated, tubular towel rails 20 mm dia, D-type, 60 cm long between flanges, completed all as specified and directed. 101 S&F in repair brass chromium plated shower roses with swivel joints, 200 mm sizein square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed. 102 Dismentling of floor, hearth or wall tilingincluding cement mortar bedding (but not backing) complete all as specified and directed. 103 M&L for Non-Skid colouredvitrified ceramic tiles 8-10mmmm thick, scratch free,acid reistance (square/rectangular) area of tiles exc 18 sqm and n exc .38 sqm in each tilwe as in floors,skirting and dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying glazed tiles in floors etc complete all as specified and as directed by the Engineer-in-Charge 104 M&L forNon Skid ceramic coloured tiles 7 to 8 mm thickjoint free (square/ rectagular) area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm ,in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchthe shade of tile and laid over and inclduing 15mm thick screed bed layer in CM (1:6) complete all as specified and directed. 105 M&L for vitrified light shade floor tiles (scratch free Double charge GVT) 10mm thick (square/ rectangular) area of each tile not exc 0.36 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed. 106 M&L for Glazed ceramic tiles in vertical surface 450x 300x7 mmthick joint lesstiles set and jointed in neat cement slurry and pointed in white or coloured cement to matchthe shade tile over and inclduing 10mm thick rendering in CM (1:3) complete etc. (1st quality/Premium Quality) complete all as specified and directed. 107 M&L for Glossy elevationtiles in vertical surface 450x 300x7 mmthick joint lesstiles set and jointed in neat cement slurry and pointed in white or coloured cement to matchthe shade tile over and inclduing 10mm thick rendering in CM (1:3) complete etc (1st quality/Premium Quality) complete all as specified and directed. 108 Schedule of Credit (MINUS) Rs. 93,885.00 B/F from Serial Page No.[Note : Detailsof items for schedule of credit is given on Srl Page No. _____] This amount shall be automatically deducted to arrive at tendered sum
