Tender For External Electrification Work H T And L T Work At Sector-16 Manjhola Yojna No 4 Part Ii Vistar Moradabad. - H.T. Work 2 Supply and Erection of following Steel Tubular polesBottom Portion Galvanised with base plate with 1/6 over all length of pole grouted with cement concrete below G.L. in 1:4:8 (1 cement 4 fine sand and 8-40mm nominal size OBB) including plinthing of pole 30cm above the groundlevel and 10cm below G.L. with 1:4:8 cement coarse sand & 20mm nominal size stone grit plastering with 1:4 cement sand mortar (1 part cement 4 part fine sand of FM-1.25) painting and numbering and also making strip with enamel paint in white and P.O red colour alternate layers of 20cm upto 1M above the plinth on pole including excavation, back filling etc. rate includes cost of all materials, labour and T & P etc. required for proper completion of work as per direction of E/I. 3 410 SP 5511.0 M long. 4 Supply & Fixing of F-bracket for 11KV pin insulator. 5 S.T. pole 6 Supply & Fixing of V-shape cross arm made of M.S. channel size 75x40mm(5.7kg/m) as per Direction of E/I. 7 Supply & Fixing of Straight M.S. channel size 100x50mm (7.9 kg/m) 1.380M. Long for Cross Arm . 8 Supply & Fixing of straight of M.S. channel size 75x40 mm (5.7kg/m) 2.24 Mtr. Longfor guarding. 9 Supply & Fixing of clamps make of 75x10mm M.S. flat with packing piece for securing channel of item no. 3, 4 & 5 with the following types of supports. These will be painted with Al. paint in two coats over one coat of red oxide of complete with bolt & nut etc. 10 For S.T. pole 11 Supply & Erection of D clamps (For Disc Insulator)Made of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with Aluminium paint . As per PWD SOR-2018 S.I. No. 623 12 Supply & Fixing of 11 KV pin insulator with pin on steel poles or any where specified including bolt and nut to fasten the pole cap/cross arm with the pole. 13 Supply & Fixing of 11 KV disc. And fittings B/S type on cross arm/clamps fixed on poles including bolts, nuts and washers etc. for proper completion of work. 14 Supply & Erection of 11 KV section Double pole structure (Riser) made of following types of supports duly grouted. Plinthed, Plastered and painted in the same manner as already specified for respective supports with one nos. channels of size 100x50mm and 75x40mm M.S. channel and 2 Nos. bracing of angle iron size 65x65x6mm 3M length fixed with packing piece and bolt and nuts as required including cost of material, labour and T & P required for proper completion of work as per direction of E/I. 15 11 Mts. longSP-55 16 Supply & Fixing Eye bolt 100x12mm with nut on guarding channel fixed on steel supports. 17 Supply and Erection of suitable size of ACSR conductor confirming to latest relevant IS specification on steel support including binding, jumpering, sagging and cost of all material, labour and T & P required for proper completion of work as per direction of E/I.As Per PWD SOR-2018 S.I. No. 627 18 Raccon/Dog 19 Supply and Erection of 7/16 SWGG.S. wire used with guarding channel on steel poles including the cost of material, labour and T & P etc. required for proper completion of work. 20 Supply & Fixing of Cradle type guards of 6 SWGG.I. wire including binding etc. complete. (as per specification no. 14) As Per PWD SOR-2018 S.I. No. 629 21 Making Suitable earth of H.T. overhead line pole with 2.5 Mts. long 20mm M.S rod connected with 7/16 SWGG.S. wire duly clamped & binded on pole including the cost of materials, labour and T & P required for proper completion of work as per direction of E/I. 22 Supply & erection of stay set at 3.5 Meters away from the pole complete with galvanized 19 mm dia x 1.80 Metres long stay rod, 30 cm x 30 x 6.3 mm anchor plate, thimble stay clamps, stay insulator, 19mm600 mm double screwtightener, 7/3.5 mm G.I. Stay wire etc. in 1:3:6 cement concrete complete in all respect. As per PWD SOR-2018 S.I. No. 631 23 Supply and Erection of strut stay atleast 1.8Mts. away or as per actual site requirement for following types or supports duly grouted plinthed with cement concrete in the ratio 1:4:8 (1 part cement, 4 part fine sand and 8 part 20mm size nominal size grit) plastered with cement find sand mortar in the ratio 1:4 (1 part cement & 4 part fine sand of FM-1.25) painted and numbered in the same manner as already specified for S/F of respective support for L.T. works. Including 2 Nos. M.S. clamps made of 50x6mm M.S. flat with nut bolt and washers required for proper completion of work as per direction of E/I. 24 410 SP 55, 11 Mts. long S.T. Pole. 25 Supply & Fixing of danger board (L.T.) size 200x250x1.6 mm at suitable height of pole as per direction of E/I 26 Supply & Fixing of barbed wire (1.5kg) duly clamped with 20x3mm M.S. flats at both ends on steel poles at suitable height as per direction of E/I. Annexure No. 27 Supply & Laying of 3 Core Standered Aluminium Conductor XLPE (Cross Linked Polyethylene) insulated PVC Bedded, Galvanised Flat Steel Strip armoured Cables Confirming to IS 7098 (Part-II with latest Ammendments) 11 KV Grade at a depth of 900 mm below Ground Level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps. 28 300 Sqmm 3 core 11KV XLPE 29 120 Sqmm 3 core 11KV XLPE 30 Supply and jointing of Outdoor 11 KV jointing kit (Heat Sink) per XLPE cable including cost of all material Labour and T & P as per proper completion of work as per direction of E/I. Make (Raychem/3M) as per DSR 2022 S.No.10.5.2 & 10.5.4 31 300 Sqmm3core 32 120 Sqmm3core 33 Supply & Fixing of following type of G.I. pipe B class for cable clamped with supports by 3 Nos. clamps made of 20x3mm M.S. flat and suitable size of nut bolt and washer required for proper completion of work as per direction of E/I. 34 100 mm dia 35 L.T. & Transformation Work 36 Supply and Erection of 8.5 Mtr. long PCC Pole confirming to the I.S.S. No. IS 2678-1960,IS 1343-1960 & IS 456-1964 grouted with 1:4:8 cement, concrete ( 1 cement, 4 fine sand and 8-OBB of 40mm nominal size including plinthing with 20mm nominal size stone grit 10cm below the G.L. & 30cm above the G.L. plastering with 1:4 cement mortar, painting and numbering of pole and making strip with enamel paint complete with all materials, labour and T & P etc. and also including the cartage of pole to site of work. 37 Supply & Fixing of suspension type clamp (H.T. & L.T. Pole) made of Al alloy and shall be capable of holding Al alloy messenger wire of compacted dia. The eye hook shall be made of forged or mild steel the clamp shall be provided with black weather resistant plastic coating of atleast 1mm thickness to prevent insulation of phase conductor from chafing due to rubbing against the clamp it shall provided sufficient flexibility to allow the movement of clamp at both, straight and angle location its hard ware shall have good finished and all ferous fittings, eye hook, bolts, nut and washer shall be galvanized with zinc and it also includes all the cost of material, labour T & P proper completion of work. 38 Supply & Fixingof dead end clamp (H.T. & L.T. Pole) made of high strength Al alloy and U-bar shall be made ofhot dip galvanised steel and eye hook of forged steel or mild steel clamp shall be suitable for holding suitable messenger wire all ferous fitting eye hook bolt, nut and washer shall be galvanised with zinc including the cost of material, labour. T & P for proper completion of work. 39 Supply & Fixing of piercing connector made of Al alloy suitable of holding main conductor/ tap conductor of compacted diameter the connector shall be covered by the black weather resistant insulation cover made of polythylene atleast 2 mm thick to avoid short circuit and corrosion including the cost of material, labour. T & P for proper completion of work. 40 For phase wire 41 For street lightwire 42 S/F of connector for neutral conductor. 43 Supply & Fixing of distribution board box for 3 phase 10 way 100 Amp. connection made of M.S sheet 450x300x200mm size complete with 03 No. kit kat 63Amp phase bus bar 25x5mm, neutral bus bar 20x5mm, copper flat, clamps holes etc. including the cost of material, labour,T & P etc. required for proper completion of work. 44 Supply & Laying of following size of Arial bunch cable 1100 V grade confirming to latest relevant specification on steel/PCC supports including binding, jumpering sagging and cost of material, labour,T & P etc. required for proper completion of work. 45 (3Cx120 + 95 + 16)Sqmm 46 (1Cx35 )Sqmm 47 (1Cx16)Sqmm 48 Supply & Erection of stay set at 3.5 Mts. away form the pole complete with Galvanised 19mmx1.8m long stay rod, 30cm x30 x6.3 mm anchor plate, thimble stay clamps, stay insulator, 19 mm 600 mm double screw tightener, 7/3.5 mm G.I. stay wire etc. in 1 : 3 : 6 cement concrete complete ia all respect. as per PWD SOR no. 631 49 Supply and Erection of strut set atleast 1.5 meters away or as per actual site requirement grouted in the same manner as specified for respective supports & plinthing of pole with 1:4:8 cement, concrete (1 cement 4 coarse sand and 20mm nominal size stone grit) 40Cm high with 30cm above G.L.& 10Cm below G.L., plinthing, plasteringand painting including clamps made of 50x6mm M.S. flat with bolts nuts and washers etc. complete in all respect as per direction of E/I with following supports 50 With 8.5Mts. long P.C.C. pole 51 Making suitable earthing of PCC/ST poles with 2.5Mts. long 20mm dia M.S. rod with 7/16 SWGG.S. wire in 15mm dia 2Mtr. long G.I. pipe duly clamped with 3 nos clampes and binding on poles including cost of labour & T & P etc. required for proper completion of work. 52 Supply and fixing of palm or pin copper tin plated cable socket (lugs) to the cable leads insulating with tape and making connections etc. complete in all respects as per PWD SOR 2018 SI No. 504 (d) & (f) 53 16 Sqmm 54 35 Sqmm 55 Supply and Erection of Double Pole Structure made of following types of support duly grouted in 1:4:8 cement concrete (1 cement, 4 coarse sand and 8 grit of 20mm nominal size plinthed plastered & painted in the same manner as already specified for respective supports suitable for Pole mounted type substation with different types of M.S. Channel and angle iron duly fabricated for disc fittings D.O. fuse set, TPMO ladder stand projecting outside dropper and bracings, including cost of all material, labour and T & P required for proper completion of work as per drawing and direction of E/I. (as per specification no. 16) 56 With 11 Mts. long 410 SP 55 S.T. Pole Bottom section Galvanised with base plate 57 Supply and errection of 11 KV TPMO set complete in all respects.(as per specification no. 21) Annex - 58 Supply and errection of 11 KVD.O. fuse set complete in all respects. (as per specification no. 22) Annex 59 Supply and fixing of H.T./L.T. jumpering and connections on double pole/four pole, lightning arrestor and transformer. The rates include the cost of all materials, labour and T & P etc. required for proper completion work. Annexure No. 60 S/I/T/C with Loading & Unloading offollowing size 11/0.433 KV Energy Efficient (Level-1) CopperWound, Outdoor, Delta- Star, Distribution Transformer as per BIS 1180-2014 Standardsand Latest Specification of MVVNL 61 250 KVA 62 400 KVA 63 Supply, installation, testing and commissioning of Outdoor Type,dust and vermin proof weather proof with rain canopy on four sideswith locking arrangement, 800A/630A ACB L.T Panel Fabricated out of 2.0mm thick CRCA sheet steel, painted with powder coated paint of shade as per the direction of Engineer in charge after proper sheet treatment process of sheet steel. All indicating lights shall be LED type and all wiring shall be done from PVC Insulated copper flexible wire. The panel shall be completed in all respect and shall consist of following material.Incomer: 800A/630 A F.P Manual Fixed type A.C.B with Metering (ie Ameter with ASS, Voltmeter with VSS) along with, Phase Indicating Lights, CT,Control MCB etc. -1 Set Panel will have suitable rating (1Amp/Sqmm) of Aluminium Bas bar for Proper Temination of Cables. ( minimum 400 sqmm6 nos )All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports. 64 800A/630A 65 S/F of lightening arrestor set (3 Nos.) suitable for mounting on steel supports complete with all materials, labour and T & P required of proper completion of work as per direction of E/I. Annex- 66 Supply & Erection of TPN Distribution Pillar Fabricated with Wire Clad Dust and Vermin Proof as per Drawing consisting suitable size of Copper Bus Bar 60 x10mm or Equivalent sectional area consisting Henleys Pattern fuse unit set complete as follows, Metallic Pillar shall be made of 14 SWG MS Sheet on frame of angle Iron size 35x35x5mm Duly painted with 2 Coat of approved paint over rust resisting primer both side locking arrangement and handle & Danger Board complete with suitable masonary plate-form for mounting the pillar. The Pillar shall have earthing terminals as per Direction of E/I. 67 Incoming : Two (2) Nos. 500 Amp.Fuse unit 68 Outgoing : Two (6) Nos. 300 Amp.Fuse unit 69 Supply & Erection of TPN Distribution Pillar Fabricated with Wire Clad Dust and Vermin Proof as per Drawing consisting suitable size of Copper Bus Bar 60 x10mm or Equivalent sectional area consisting Henleys Pattern fuse unit set complete as follows, Metallic Pillar shall be made of 14 SWG MS Sheet on frame of angle Iron size 35x35x5mm Duly painted with 2 Coat of approved paint over rust resisting primer both side locking arrangement and handle & Danger Board complete with suitable masonary plate-form for mounting the pillar. The Pillar shall have earthing terminals as per Direction of E/I. 70 Incoming : Two (2) Nos. 300 Amp.Fuse unit 71 Outgoing : Three (4) Nos. 300 Amp.Fuse unit 72 Construction of fencing plinth of following sizes in Ist class brick work including plaster and providing flat bricks soling and pointing the same with 1:2 cement and fine sand mortar over 75mm thick cement concreting in the ratio 1:6:12 in open space of the cage as per direction of E/I and drawing. 73 6x4x0.23m for Substation 74 Supply of fixing of 2.45M. High cage fabricated with 3.0mm thick expanded metal/wire mesh of equivalent weight fixed on 50x50x6mm angle iron frame having vertical members spaced at 1.0M to 1.25M. and horizontal members spaced at 1.20M the vetical members shall be grouted in ground and horizontal members in the wall to a depth of 300mm with ends folded. The cage shall have 1000x2000mm size single leaf door with locking arrangement having door frame fabricated with 35x35x5mm angle iron and 3mm expanded metal wire mesh of equivalent weight duly fixed with the cage member. The cage shall have nut bolt arrangement for opening the sides by providing tees 45x20cm of angle iron size 50x50x6mm as per direction of E/I. It shall be painted with red oxide primer and synthetic enamelled paint as per direction of E/I. including all materials, labour and T & P for proper completion of work.PWD SOR 2018 SI No. 1142 75 Supply and Burring of Safe Earthing Electrode T-39 Zn-Zinc Coated, Length 3000 mm, outer pipe 76.30 mm x 3.2 mm inner pipe 42.40 mm x 2.6, terminal Dia 12 mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square CI frame with hinged cover & masonary housing (From electrode terminal to switch board, cost of 25 x 3 GI Strip will be extra) UPPWD SOR-2018 item no. 726 (D) 76 Construction of plinth for Transformer size 2.0x1.25x1.0 Complete With all materials, labour and T & P required for proper completion of work as per specification drawing and direction of E/I 77 Supply and laying of following size of Al. conductor PVC insulated armoured, served sheathed cable 1100V grade at a depth of 75cm. below ground level over a cushion of 75mm thick sand alround and protected with Burnt brick on sides And Top as directed by engineer in charge complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor by clamp etc.as per PWD SOR 2024 SI No. 20a.1 78 240 Sqmm 3½core 79 400 Sqmm 3½ core 80 Supply and fixing of palm or pin copper tin plated cable socket (lugs) to the cable leads insulating with tape and making connections etc. complete in all respects (as per PWD SOR 2018 SI No. 504). 81 120 Sqmm 82 240Sqmm 83 400Sqmm 84 Street Light Work 85 Supply and fixing of LED Street light Fitting with mandatory driver sethaving die cast Aluminium body with toughend glass / UV stabilized PC cover and lenses suitable for 60 Watt to 72 Watt Confirming to IP 66 and IK07 and aboveProtection having company LOGO engravedcomplete in all respect including labour. PWD SOR 2024 SI NO. 23.15 CAT-AAA 86 Supply and fixing of LED Street light Fitting with mandatory driver sethaving die cast Aluminium body with toughend glass / UV stabilized PC cover and lenses suitable for 75 Watt to 90 Watt Confirming to IP 66 and IK07 and aboveProtection having company LOGO engravedcomplete in all respect including labour. PWD SOR 2024 SI NO. 23.16 CAT-AAA 87 Supplying and fixing of 32 mm dia x2.00 meters long G.I. pipe (medium class) bracket for mounting of L.E.D. street light fitting on pole including bending the pipe to the required shape.2 nos 40mmx3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. DSR 2022 Item no. 12.34 (1477 x 0.789 = 1165.35x109/110 = 1155) 88 Supply & Fixing of 12.5 Mtr. High Mast Shaft of approved make with rising system hot dip Galvanised inside & out side dip, having pole sheet thickness 3mm. Top dia minimum 150mm, Bottom dia 310mm base plate 25mm thick suitable for wind velocity as per IS 875 Part3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP Power tool motor, 3 point suspension system with steel wire rope 6mm dia, double drum winch, including making suitable foundation as per manufacture drawing/site requirement along with foundation bolts nuts, washers, anchor plates etc. complete in all respect as per PWD SOR 2024 S.No. 21.3 89 Supply and fixing of Factory Wired Integral LED Flood Light Luminaries with Die cast Aluminium housing and lenses built with mandatory Driver set suitable for 170 to 200 Watt. confirming to IP65/66 Protection complete in all respect including labour. Cat AAA (18700-22000 System lumens, high power LED with lenses, 110lm/w, PF>0.95, THD<10% at full load, CRI> 70%, potted driver set ( non circuitary) phase to phase protection at 440 Volt & > 300 Volt auto cut and restart feature with years warrantee as per PWD SOR 2018 SI No-1455 CAT-AAA 90 Supply and laying of following size of Al. conductor PVC insulated armoured, served sheathed cable 1100V grade at a depth of 75cm. below ground level over a cushion of 75mm thick sand alround and protected with Burnt brick on sides And Top as directed by engineer in charge complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor by clamp etc.as per PWD SOR 2024 SI No. 20a.1 91 10 Sqmm 2 Core 92 16 Sqmm 4 Core and 02 Nos High Mast (16 Sqmm 4 Core) 93 S&F of100 Amp. 415 V metal clad T.P.N. HRC Type Switchfuse unit complete with HRC Fuse on angle Iron Bracket complete in all respect.PWD SOR 2018 SI NO. 328 CAT-B
